I have a problem with the graphics window in Inventor 2012, it happens once a week now, but getting more frequent the graphics window turns white and i cant see anything, i need to re-boot to get it back.
its a new PC, Inventor 2012
Quadro FX 1700, driver 265.70
windows professional 7, 64 bit (service pack1)
Inventor 2013 and DWG trueview and Inventor View 2013 (or 2014) on a windows 7 computer.
Trying to launch files from an Intranet site. The files always want to come up in a browser window.
In windows XP, I was able to go into File Types and override this by specifying the program (sometimes).
In Windows 7 the File Types have been redone.
I want these files to launch in their respective programs ( .dwg files in trueview, .idw files in Inventor View).
Things I've tried:
Resetting internet explorer settings.
Disabling all addons
Changing security settings to low
While displaying animation in autodesk inventor 2012, inventor window get frozen. Is there any solution to this problem like onIdle event where we can do the calculation for what next animation shown?
View 2 Replies View RelatedI am having a problem with Inventor 2012 running under boot camp (Windows 7) on my 2011 Mac Mini. The order I did things:
1) When I first installed inventor, it worked fine and the graphics were nice and responsive.
2) Then I installed Parallels 7 on the mac side to try out inventor there. It didn't work nearly as well.
3) I went back to Windows 7 boot camp to reconfirm that it worked well, and indeed it did.
4) I went back to the Mac side / Parallels and tweaked the settings around (switched from Performance to compatibility) until things seemed to be working only slightly slower, but with a mouse lag. In that environment, I got a log as follows (this was when it was in performance mode, not compatiblity):
5) OK, HERE IS THE BIG PROBLEM. After a while, I decided to go back to the windows (boot camp) side, but now the performance was no better than on the mac side. Switching the graphics setting back and forth didn't seem to work. I now have this for the hardware diagnostics:
So in short, from all the switching back and forth, something got messed up and now inventor falls back to D3D10 and less hardware acceleration. How can I switch it back to original or somehow get it to re-detect?
I have try every solution on the autodesk page about the blank activation page problem and it is still not working for me... I have instal autocad and uninstal it multiple time and I always get the error 2738 (probably related) the program is working fine on the trial but it will expired soon. What does the error 2738 mean?
View 1 Replies View RelatedI have a user who opens his drawings from 2012 in 2013 and they show the sheet set manager blank. He goes back to the 2012 seat and the sheet set manager displays the dwgs.
View 1 Replies View RelatedWhen I click the Photoshop CS6 icon from the dock in OSX I now get an initial blank canvas pop up. It's not even a file. How can I get rid of it ?
View 2 Replies View RelatedI am not able to get into my Illustrator CS3 account. A blank window shows when I try to get into the program and I can't get past the blank window. For some reason I am locked out.
View 1 Replies View RelatedIn the Map module I now see only a blank window instead of the map, even for the tagged photos.
PC, Windows 8.1
I just upgraded to windows 7 and now there is a blank preview window when I try to capture. I have tried capturing in both DV and DVD and no preview. I am capturing via firewire from a VHS. This worked perfectly under windows xp but is not working under 7. It seems that it does capture but I cannot preview in order to find my spot on the tape.
View 6 Replies View RelatedI have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies View Related02012013010.jpg
Blank Blocks behind text and graphics
using PS CS3 on mac 10.8.6 - been fine for years and was OK two days ago. Now when I open it I get a blank window (just the yellow dot upper left) and all else is frozen - can't even quit. Used 'force quit' which works but does NOT say that it is not responding.
Tried rebooting and restarting etc - no change.I know its old but it was fine for my purposes - and I have not changed anything.
Just installed CAD 2012 LT...how can i get the array window we use to have on previous editions to work again on this edition? When i used to select array on the ribbon, a window was opening, and i choose what i wanted to do...but now,
No window appear, i tried to follow the command.
I cannot remedy the CS3 blank-screen problem on my Mac (Safari OS) with the suggested fix, as I don't get an error window saying "Never Register" after disconnecting internet and re-launching CS3.
View 2 Replies View RelatedI have been using Photoshop CS3 Extended for quiet a while without problems.Suddenly a blank registration window shows up whenever I need to use the program.Because I am unable to do anything with a blank window I cannot dispose of it and I cannot get past it to complete the startup process so I have to force quit the program.I have registered this version probably more than once so I can't imagine that to be a problem. I always use a partitioned drive with a full copy of the OS and applications installed on it.The same problem exists with that copy of Photoshop as well.
I am using an early Mac Pro with Snow Leopard.
I have uninstalled the program and reinstalled it from my original disc but the same problem still exists.How do I solve the problem of being "locked out" of the application as I am also locked out of work as well ?
Upgrading to a later version is not an option at this point.
I recently purchased VSP4 and when capturing from Panasonic camera via fire wire, the preview window remains blank but capture is successful. I can preview video on LCD screen of camera but that is all. All the settings seem to be ok. (PAL). However, the options panel is greyed out except for insert to timeline option. Also, the video properties in the options panel are all greyed out. I have a previous version VS3 on another computer which shows the preview window OK on capture. Could this be the integrated video card in my new computer or is there something else going on here?
OS Windows 7 Ultimate 64 bit
MB Intel DH67GD intergrated HD Graphics Dual Display on board sound
CPU Intel Core i5 2500 3.3 GHz
8gb DDR3 Ram
Seagate 3.5 2 TB SATA2 HD
Panasonic NVGS400 for SD
Panasonic FZ100
I've even tried the old open a new file, and import the file that has no render setting information, and that works maybe 10% of the time.
View 1 Replies View RelatedFirstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
All of a sudden and out of the blue this window fails to apprear when trying to save a drawing to another location or to a different file name.
AutoCAD 2011 still has this funciton so have had to go back to using the earlier version.
When i use standard Acad-functions or even simply select an object like a polyline from land-survey,the "ribbon" changes to the corresponding Topic of the object,and the Map3D window looses its focus. (normal windows-mouse-cursor is displayed, not the AutoCAD crosshair). After clicking in Map 3D window again, crosshair reappears,and work can continue.
It doesn't matter if Map3d-windows is in windowed mode or fullscreen,it also doesn't matter if the windows is only on one of my 2 monitors or on both.
didn't have this problems using Topobase Client 2009,2010,2011...but since 2012 few problems evolved... (drawing-order-bug, memory-leak problem etc. etc.)
I am using civil 3d 2012 when i click open and save as not show a window its show command line choose file <c:folder location like this.
View 3 Replies View Relatedhow do i open or drag multiple images onto the same window or blank background in elements 11? was easy in 2.0 as all images were available on same page. where is this option in 11?
View 3 Replies View RelatedHow do I get my dimension styles, door styles, window styles, etc. from Architectural 2011 to 2012? I migrated but I don't see where it brought my styles over.
View 4 Replies View RelatedHow do I turn off the apply to layout button in thi window
View 4 Replies View RelatedIs there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
Just upgraded my X5 to X6. So far so good, except pop up menus are blank. See image below. Am I missing a setting somewhere, or is this a Windows XP Pro problem? I have my screen resolution set to the Corel recommended 1024x768.
View 7 Replies View RelatedRecently I downloaded 3ds Max 2014 trial from autodesk. It worked without any problems for a week. It all started when I updated my Nvidia 630M with a WHQL certified graphics driver. When I opened Max after the driver update it closed with an application error which said that, an error has occurred and the application will now close.
Made a complete uninstall of max, plugins and graphics driver. But it had the same problem. Now it opens after a product update. But viewport is completly white. If I open any file it crashes. Tried changing the viewport renderer from Nitrous to Direct 3d and Open GL. But it doesn't even start and gives the same application error. It all happens only if I opened max with graphics card both with the old and the newer driver. It works fine with the integrated graphics.
dxdiag works fine and the report says that there are no problems.
Core i5-3210M @ 2.5 GHz
Windows 7 Ultimate 64bit sp1
4GB RAM
1GB Nvidia GT630M
i have been working on this project in corel draw12 for several weeks now, as it is or/was coming to its final stages a few days ago it now only opens a blank page, it is 2.14 gb and it will get bigger as it reaches its final stages.i can still see it in preview. when it was opening it took a very long time to open i realise the reason for this is the size im using very high resolution images and designing and editing, or maybe there is another program that you may recommend that will support the size so i can complete my work.
i found a backup copy but it will not import the size is 1.70 gb seems its still too large to open ,
i don't think it has anything to do with memory , i have a full drive laptop is new. my thoughts are that corel draw will not open a file that size, and you are right about breaking it up i should have worked in several sheets but saved them desperately.
When I try to open an X5 template in X6, nothing happens in X6. I don't receive any error messages. It looks like the template is opening, but I just end up with a blank grey (no file opened) slate. I am using the 32-bit build. Everything else seems fine.
View 1 Replies View RelatedGot the "Cannot open a blank document" ERROR Message when I went to open a recently created Corel Draw X5 file. Using Windows 7 Professional.First time I've gotten this message.
View 1 Replies View Related