While displaying animation in autodesk inventor 2012, inventor window get frozen. Is there any solution to this problem like onIdle event where we can do the calculation for what next animation shown?
View 2 Replies
I have a problem with the graphics window in Inventor 2012, it happens once a week now, but getting more frequent the graphics window turns white and i cant see anything, i need to re-boot to get it back.
its a new PC, Inventor 2012
Quadro FX 1700, driver 265.70
windows professional 7, 64 bit (service pack1)
Is it possible to change materials mid animation in inventor 2012? Essentially, im looking to rotate a camera arround an assembly,make the enclosure glass and do it again.
Additionally, Is there a way to use animations already created in an ipt file (using the same model) in Inventor Studio?
I collasped my animation window and I can't resize it to show my animation timeline. I can only resize the window left and right??? I have exited studio environment and re-enter and still can't resize window up and down.
Inventor 2012 Certified Professional
Software: Autodesk Inventor Professional 2012 64 Bit- Service Pack 1
Operating System:64 bit-Windows 7 Enterprise-SP1
Processor: Intel Core 2 Duo CPU P8700 @2.53GHz
RAM: 16 GB
We are getting attached window of Autodesk report in mid-way of working on Inventor .
What is the reason behind this window coming while working.
After putting email-id in the box then clicking on the 'Send report' how we get the solution .
using PS CS3 on mac 10.8.6 - been fine for years and was OK two days ago. Now when I open it I get a blank window (just the yellow dot upper left) and all else is frozen - can't even quit. Used 'force quit' which works but does NOT say that it is not responding.
Tried rebooting and restarting etc - no change.I know its old but it was fine for my purposes - and I have not changed anything.
I opened Inventor and on the ribbon there are only lines and boxes.
Its happening a few machines but not all in a lab.
I did download a patch last week, could this be the cause ??
I can't to change colour scheme autodesk inventor 2012
View 2 Replies View RelatedI wanted to go through all of the Essentials videos for Inventor (URL... ) but every single link listed for the Essentials is broken. Is there another place I can find them?
View 3 Replies View RelatedRecently installed 2013, previously had 2011inv. Trying to find out exactly what the constraint changes are from 2011 to 2012 inv. I as told that there was a post here with them, but cannot find it (only posts of constraint problems that people were having when they switched to 2012).
what the changes are from inv2011 to 2012 or inv2011 to 2013. Doesn't autodesk have these changes listed somewhere in writting?
Experts, how do I get a list of all internal iproperty names in Autodesk Inventor 2012
View 1 Replies View RelatedHow to import the inventor studio animation to autodesk showcase? i have created the animation by inventor studio and i gonna record it as a movie but then i found that the movie quality is terrible and its take very very very long time to proceed if using inventor!
View 3 Replies View RelatedI am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies View RelatedI am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).
View 6 Replies View RelatedAfter archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
Running version 2012 of Civil 3d
We have an urban divided highway resurface and widen project. We have an eastboiund and westbound corridor we would like to get to display on our single set of cross sections
We originally set up our corridor to do the widening and ditches portion and then went on to do the work to set up the model to do the resurfacing. When we did the sections for the ditches only they displayed fine. Now that we have the resurfacing incorporated into it the ditches no longer display.
we have reviewed the targets of our assemblies, we have reconstructed the cross sections, to no avai. The software is not doing us any good right now. Need to get smarter
Suddenly, the multi line text editor in no longer displaying when I select "new" from within the DIMEDIT command. I'm presuming that there is some sort of system variable that controls this, but I have not been able to find it in the help files. The Mtext editor is working from the Mtext command, so I know it's not the DTEXTED variable.
View 6 Replies View RelatedWe are currently using 2012 Civil 3D, and we have a issue with a drawing that not all the Pipes from the pipe network are displaying in the Profile, and even the pipe properties display box the lengths show up way too long and the stationing does not display correctly in this pipe properties box either.
The Big Twist is that we have 2 machines in the offices that will display the drawing correctly, in profile view and pipe properties display box has correct lengths and stationing. So we know it is not styles, etc.
Direct support has suggested we un-install all Autodesk products and reinstall them all again, we tried the repair, however this did not work. Any other way before we have to go through all this work, as we are looking a huge amount of downtime, and we do not think this is the issue. Perhaps a Civil 3D variable or Autocad variable is different?
i am using photoshop CS. Whenever i try to use a filter, only about 3/4 of the filter's window is displayed as shown in the link below...
I can't rescale the window any further! Do I have to customise something to make it display fully?
I have an assembly file I am trying to put together with parts I downloaded from grab cad. I believe the parts were originally modelled in solidworks. I tried scaling some of the parts to be more my size and was directed to inventor fusion where I was able to scale the parts but now the assembly is acting strangely. As soon as a part gets one constraint applied to it n the assembley the part wont move like it is grounded but its not. When I click degrees of freedom it says the part has some. Why the assembly is acting like this? The file is attached.
View 2 Replies View RelatedWhen I use select object, it never displays the marquee correctly. One of two things will happen.
It will
1. Not even display the marquee at all e.g. I use select object by rectangular selection and the rectangle marquee box is invisible (although I can still select things)
or
2. If the marquee does display it shows it behind the objects, instead of in front of them, as scene in the image below.
Just installed CAD 2012 LT...how can i get the array window we use to have on previous editions to work again on this edition? When i used to select array on the ribbon, a window was opening, and i choose what i wanted to do...but now,
No window appear, i tried to follow the command.
I am using Paint Shop Pro X5 Ultimate.The Preview Window of the Manage Tab seemed to be displaying photos oddly - the photo wasn't filling the preview window (it was leaving an area around the bottom and right-hand side of the photo). At first I thought it was just the zoom setting, so I zoomed in. However, I have now used several features of the software that seem to show that the Preview Window (only on the Manage Tab) is incorrectly displaying the preview.
The problem became further evident when I used the Find People feature of Paint Shop Pro to locate the faces and tag several people, however the position of the tags are as if the Preview Window is filled by the photo. I have attached a screenshot that shows that the tag for the person in the bottom right-hand corner of the photo has her tag positioned off the photo (outside of the border of the photo) to the bottom and right of the photo even though it was automatically placed by the software. The position of the tags for the people in the photo are all offset slightly to the right and down and would be correct only if the photo was displaying correctly in the Preview Window.
I have tested uploading the photos to Facebook and the tags appear correctly once on Facebook. If I manually tag the faces as they appear on the Preview Window, the tags are incorrectly placed once the photo has been uploaded to Facebook (they appear up and to the left of where the face is positioned in the photo.
I have tried resetting the preferences and turning off some display features of Microsoft Windows, but I have seen to changes in the Preview Window.
Properties of your source files (format, file size, where did you get it?) The example photo was taken in .jpg format using a Nikon D3100 and 18-200mm Nikon DX lens, though this affects my entire photo collection taken on several different cameras and in several different formats (including RAW).
What devices are involved and their mode of connection? The files were transferred directly from the camera to the computer using a USB cable. Project Properties:I was using the Manage tab to sort photos and tag people using the Find People feature and also tried manually tagging faces.
All of a sudden and out of the blue this window fails to apprear when trying to save a drawing to another location or to a different file name.
AutoCAD 2011 still has this funciton so have had to go back to using the earlier version.
When i use standard Acad-functions or even simply select an object like a polyline from land-survey,the "ribbon" changes to the corresponding Topic of the object,and the Map3D window looses its focus. (normal windows-mouse-cursor is displayed, not the AutoCAD crosshair). After clicking in Map 3D window again, crosshair reappears,and work can continue.
It doesn't matter if Map3d-windows is in windowed mode or fullscreen,it also doesn't matter if the windows is only on one of my 2 monitors or on both.
didn't have this problems using Topobase Client 2009,2010,2011...but since 2012 few problems evolved... (drawing-order-bug, memory-leak problem etc. etc.)
I am using civil 3d 2012 when i click open and save as not show a window its show command line choose file <c:folder location like this.
View 3 Replies View Relatedthe possibility of displaying a random frame from the timeline in one of the views. Pure luxury if this was wipeable over the result! A lot of people ask for lustre, I would be happy enough with that "wipe" at the moment. CFX works fine for grading, but without reference..How are you dealing with this, is there a "secret button"?
View 4 Replies View RelatedThe company I work for has used autodesk models and set up their own frame generated parts. Basically took the models and every generated model will have their custom properties specific to our company. These custom parts appear when I change to the correct project and will not show on default. Frame generator has been working fine up until the past 2 days.
When I try and edit the a frame generated piece (deleting a trim with frame generator, editing a part with frame generator) the dialogue box shows and the blue bar is running across the box but it stays in this state until I exit the program. I have even let it load for about 30 minutes before after leaving it to go out for lunch.
This has only recently started happening and I am not sure what is wrong. Frame generator does work like normal sometimes. I don't have any programs that are using excessive amounts of memory in the background.
How do I get my dimension styles, door styles, window styles, etc. from Architectural 2011 to 2012? I migrated but I don't see where it brought my styles over.
View 4 Replies View RelatedI have created a template file but whenever I open and display data in AutoCAD Map 3D 2012 it does not apply to the opened data from Oracle 10g. Infact, it change every time I open the data from database!
Using the symbol in AutoDesk Map 3D 2012. Also note that my database is Oracle 10g.
