I have created a template file but whenever I open and display data in AutoCAD Map 3D 2012 it does not apply to the opened data from Oracle 10g. Infact, it change every time I open the data from database!
Using the symbol in AutoDesk Map 3D 2012. Also note that my database is Oracle 10g.
ORacle spatial connected via FDO.
Oracle Table uses a user defined SRS.
Drawing entities (CAD) in DWG file.
command: mapexportfdo
If no CS is assigned in Map 3D, the export of the autocad entities works ok, the result geometries are written with the correct (table/metadata) SRID.
If a CS in MAP3D is assigned (for example as a result when using a WMS from a public server), the export fails.
It seems that MAP3D is trying to "translate" the CR to SRID somehow and it fails if these are different. As this is a "plain CAD" to GIS export, I expect MAP3D to behave like:
Either it just works as in the first step (write geometries) and pick the SRID from the metadata, without applying any transformation.
Or it applies a transformation if feasible ONLY when I the user checks the thick box: Convert Coordinate to (in the options tab on the Export dialog box.
In my case I do not want to transform, I just need the geomes being exported into the target table. So far I have only managed to do so when both drawing cr and oracle SRID are "MAP3D technically equal" (based on a similar EPSG code)
Specifically, because MAP3D does not recognize the user defined SRID in ORacle, obviously it is up to the user to know what to do with the data.
NOTE1: "export fails" is the only message as a user I get from the software, not knowing what is going on. I had to drill down this issue by trial and error, great error messaging (or better refusing message).
NOTE2: Export via another file format is NO option! I need a direct export (as it always worked, also when creating features from geometry). This time I need to exportway.
I am struggling to edit the standard set of blocks that comes with AutoCAD such as receptacles junction boxes etc. I want to edit the standard blocks and then save my changes for future use. Right now the blocks come in at different sizes then I would like. I try to edit them in the block editor however the changes I make do not apply to any other or new drawings that I make.
I have attached an image of the differing symbols and sizes. I want them to be consistently sized.
In AutoCad 2000 there was a design center that showed my symbols on the CD. Now I have 2010 and can't acess my symbols on the CD. I can't run the installl on the CD because I don't have admin rights.
View 2 Replies View RelatedAfter archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
I have a new requirement from company to save a static drawing's dimensions' data into DB table. We have hundreds of drawings. DBConnect connects with oracle using ODBC. But how it is possible that we draw a drawing and its attributes are saved in DB.
View 3 Replies View RelatedIs this possible, create a .Net 3.5 Dll(A.dll), reference to Oracle 11g 32 bit client Oracle.DataAccess.dll. this dll will be used in another dll(B.dll), which load in AutoCAD 64 bit application. 32 bit version of AutoCAD is not allowed to install on Windows 7 64 bit. Right now I set my B.dll as 'Any CPU', and A.dll as 'Any CPU' as well. Do I have to use 64 bit oracle client in my A.dll?
View 1 Replies View RelatedWhen working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols. Are they not available in LT? Is there something I need to do to activate them?
View 1 Replies View RelatedI am working on an application which uses an oracle database as backend. The application uses a login dialog in void IExtensionApplication.Initialize()
so my application knows the credentials for the oracle database. I use a drawing-template which has a database link in it. This points to a UDL-file in 'Data Links'. If i add the Credentials to this file and set the Parameter Persist Security Info=True the Credentials are ignored. So i thought i can avoid the additional loginprocesses if I add the following
var acadApp = (Autodesk.AutoCAD.Interop.AcadApplication)Autodesk.AutoCAD.ApplicationServices.Application.AcadApplication;dynamic cao Connect = acadApp.GetInterfaceObject("CAO.DBConnect.16");cao Connect.Connect("myconnection.UDL", "username", "password", false);
If i don't execute the code above i need two logins for the new drawing. After I added the code to my application I still need one oft this.
I have just installed Map3d 2012 on a new windows 7 machine and connect to data using oracle! I have some .layer files that are stored on my server which worked perfectly in 2011! The problem I have now is when I use Load layer from the task pane I receive an message that reads..
Failed to open FDO connection
ORA-01005: Null password given: Logon denied
I can log in to my oracle database which gets rid of the error but no data is bought in! Also if I try to connect with query (polygon region on Map) from data connect (polygon region on Map) no data shown, just a red polygon where the data should appear!!
setting up Industry Model using Oracle 10g and 11g XE edition. I cant make it working, trouble starts when trying to create MAP 3d System User "MAPSYS" in Industry Model Setup, during user creation(about 68%) error popups" Could not create user MAPSYS"XE: Unable to deploy java package. Does XE version is suitable for Industry Models. Direct connection to Oracle 10g or 11G XE with MAP 3d working for me perfectly.
System I have is: WIN 7 Enterprise( 64 bit), database is Oracle 10g and 11g XE(32bit), client is Oracle 11g R2(administrator),all autodesk software is 2013 versions(64 bit). I tried it also with 2012 software but same result.
I have been tasked with finding a way to link data from Oracle and SQL databases with CAD files of rooms in certain buildings. My goal is to be able to select an arbitrary room within a building and be able to access certain information. I don't actually have access to the databases yet, but I would like to know how to do this when I do. My data consists of "human" data such as: name, email, position, sex, etc; as wells as "physical" data such as: square footage of the room, who uses it, computer serial numbers, or what department is in charge of it. Using this data we will cross reference the tables to determine what our needs are.
My AutoCAD skills are good but I've never come across anything like this in the class room. Most of my knowledge is Civil based and more focused on design.
I opened Inventor and on the ribbon there are only lines and boxes.
Its happening a few machines but not all in a lab.
I did download a patch last week, could this be the cause ??
I can't to change colour scheme autodesk inventor 2012
View 2 Replies View RelatedI wanted to go through all of the Essentials videos for Inventor (URL... ) but every single link listed for the Essentials is broken. Is there another place I can find them?
View 3 Replies View RelatedRecently installed 2013, previously had 2011inv. Trying to find out exactly what the constraint changes are from 2011 to 2012 inv. I as told that there was a post here with them, but cannot find it (only posts of constraint problems that people were having when they switched to 2012).
what the changes are from inv2011 to 2012 or inv2011 to 2013. Doesn't autodesk have these changes listed somewhere in writting?
Experts, how do I get a list of all internal iproperty names in Autodesk Inventor 2012
View 1 Replies View RelatedWhile displaying animation in autodesk inventor 2012, inventor window get frozen. Is there any solution to this problem like onIdle event where we can do the calculation for what next animation shown?
View 2 Replies View RelatedI am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies View RelatedI am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).
View 6 Replies View RelatedI know we are a little behind the times, but when upgrading to Ex1, will all of the existing projects still be usable? Or do we need to "Wipe 'em All"?
View 3 Replies View RelatedI have a student license for Autodesk Maya 2012 (I'll need it for school), but whenever I try and start up the setup, I get this weird message:
error 1321. The installer has insufficient privileges to modify the file C:Program FilesAutodeskMaya2012PYTHON_LICENSE
Then the following message:
Fatal error during installation. #229: failed to run AdskExecuteSequence
Then "Failed to initialize Autodesk Maya 2012"
And then it the installation exits itself out.
I have a 32bit Windows computer.
I'm looking to import a model with materials. Is 3DS the only file format that will carry this along? That would suck for me cause my animator does not use Autodesk software. I have an obj with the material jpegs but can't seem to find find the proper wrap mode that makes it all come together. Maybe FBX is a better option.
View 4 Replies View RelatedI can't start smoke neither 2013 nor 2012.
The Console get me this message:
Jun 03 10:16:12 : WARNING: Unable to run with vref
Jun 03 10:16:12 : Effective User ID not 0 (root) !
Jun 03 10:16:12 : Aborting....
Jun 03 10:16:12 : Effective User ID not 0 (root) !
Jun 03 10:16:12 : Aborting....
Jun 03 10:16:12 :
knows the version of the Red Rocket driver/firmware supported in Smoke on Mac 2012?
View 1 Replies View RelatedAny time the gateway scans a directory, which has a clip that has stereo audio, Smoke hangs. Is this a bug? Specifically the file was a Canon 7D file which had audio recorded with it. The crash does not happen when we try a file without audio or a file whose audio has been converted to mono. The file was directly from the camera. Same thing happens when it is a Prores HQ file with Stereo audio.
View 9 Replies View RelatedStatic network, static IP address on fixed machine. Stable install been used every day for over 2 years. Come in this morning and backburner server fails to launch. Network functional as usual, checked all the usual culprits and no joy. Reinstalling SP4 now to see if that repairs links.
View 5 Replies View RelatedI have recently upgraded to Smoke 2012 sp2 and have a small issue regarding the reordering of my clips in the source area.
On 2011 when you placed clips in the source area in a specific order and saved it to the library and when you recalled it from the library it would put the clips back in exactly the same place you left them. Now in 2012 when you do that it re-orders them in some sort of chronological order.
Is there a setting that I'm not aware of that will stop doing that as I place them in a specific structure which makes sense to me and is easy to find and understand on large builds, now I'm having to sift through the clips and waste time finding what I did last and checking through versions to find the latest one.
I just installed my Smoke2013 SP2 yesterday, and today I want to restore my project. From Mr. Grant Kay tutorial, I saw there's restore button once he double click the restore folder. But I can't see that Restore button.
I attach the snapshot of mine.
I have a clip that play perfectly fine in my timeline. When I export it, either as a Quicktime or image sequence, the playback stutters every few seconds; basically it double prints a frame every few seconds or something. It's extremely annoying and preventing me from a client delivery in the morning.
View 3 Replies View Relatedi was working on an animation and that was a great animation I worked on that 2 months and i was working on that and when i wanted to save the scene the monitor gone black and i restart my pc.and when i opened the maya and tried to open the scene it said error reading file.
View 2 Replies View Related
