I have a new requirement from company to save a static drawing's dimensions' data into DB table. We have hundreds of drawings. DBConnect connects with oracle using ODBC. But how it is possible that we draw a drawing and its attributes are saved in DB.
View 3 Replies
ORacle spatial connected via FDO.
Oracle Table uses a user defined SRS.
Drawing entities (CAD) in DWG file.
command: mapexportfdo
If no CS is assigned in Map 3D, the export of the autocad entities works ok, the result geometries are written with the correct (table/metadata) SRID.
If a CS in MAP3D is assigned (for example as a result when using a WMS from a public server), the export fails.
It seems that MAP3D is trying to "translate" the CR to SRID somehow and it fails if these are different. As this is a "plain CAD" to GIS export, I expect MAP3D to behave like:
Either it just works as in the first step (write geometries) and pick the SRID from the metadata, without applying any transformation.
Or it applies a transformation if feasible ONLY when I the user checks the thick box: Convert Coordinate to (in the options tab on the Export dialog box.
In my case I do not want to transform, I just need the geomes being exported into the target table. So far I have only managed to do so when both drawing cr and oracle SRID are "MAP3D technically equal" (based on a similar EPSG code)
Specifically, because MAP3D does not recognize the user defined SRID in ORacle, obviously it is up to the user to know what to do with the data.
NOTE1: "export fails" is the only message as a user I get from the software, not knowing what is going on. I had to drill down this issue by trial and error, great error messaging (or better refusing message).
NOTE2: Export via another file format is NO option! I need a direct export (as it always worked, also when creating features from geometry). This time I need to exportway.
Is this possible, create a .Net 3.5 Dll(A.dll), reference to Oracle 11g 32 bit client Oracle.DataAccess.dll. this dll will be used in another dll(B.dll), which load in AutoCAD 64 bit application. 32 bit version of AutoCAD is not allowed to install on Windows 7 64 bit. Right now I set my B.dll as 'Any CPU', and A.dll as 'Any CPU' as well. Do I have to use 64 bit oracle client in my A.dll?
View 1 Replies View RelatedI am working on an application which uses an oracle database as backend. The application uses a login dialog in void IExtensionApplication.Initialize()
so my application knows the credentials for the oracle database. I use a drawing-template which has a database link in it. This points to a UDL-file in 'Data Links'. If i add the Credentials to this file and set the Parameter Persist Security Info=True the Credentials are ignored. So i thought i can avoid the additional loginprocesses if I add the following
var acadApp = (Autodesk.AutoCAD.Interop.AcadApplication)Autodesk.AutoCAD.ApplicationServices.Application.AcadApplication;dynamic cao Connect = acadApp.GetInterfaceObject("CAO.DBConnect.16");cao Connect.Connect("myconnection.UDL", "username", "password", false);
If i don't execute the code above i need two logins for the new drawing. After I added the code to my application I still need one oft this.
I have just installed Map3d 2012 on a new windows 7 machine and connect to data using oracle! I have some .layer files that are stored on my server which worked perfectly in 2011! The problem I have now is when I use Load layer from the task pane I receive an message that reads..
Failed to open FDO connection
ORA-01005: Null password given: Logon denied
I can log in to my oracle database which gets rid of the error but no data is bought in! Also if I try to connect with query (polygon region on Map) from data connect (polygon region on Map) no data shown, just a red polygon where the data should appear!!
I have created a template file but whenever I open and display data in AutoCAD Map 3D 2012 it does not apply to the opened data from Oracle 10g. Infact, it change every time I open the data from database!
Using the symbol in AutoDesk Map 3D 2012. Also note that my database is Oracle 10g.
setting up Industry Model using Oracle 10g and 11g XE edition. I cant make it working, trouble starts when trying to create MAP 3d System User "MAPSYS" in Industry Model Setup, during user creation(about 68%) error popups" Could not create user MAPSYS"XE: Unable to deploy java package. Does XE version is suitable for Industry Models. Direct connection to Oracle 10g or 11G XE with MAP 3d working for me perfectly.
System I have is: WIN 7 Enterprise( 64 bit), database is Oracle 10g and 11g XE(32bit), client is Oracle 11g R2(administrator),all autodesk software is 2013 versions(64 bit). I tried it also with 2012 software but same result.
I have been tasked with finding a way to link data from Oracle and SQL databases with CAD files of rooms in certain buildings. My goal is to be able to select an arbitrary room within a building and be able to access certain information. I don't actually have access to the databases yet, but I would like to know how to do this when I do. My data consists of "human" data such as: name, email, position, sex, etc; as wells as "physical" data such as: square footage of the room, who uses it, computer serial numbers, or what department is in charge of it. Using this data we will cross reference the tables to determine what our needs are.
My AutoCAD skills are good but I've never come across anything like this in the class room. Most of my knowledge is Civil based and more focused on design.
i have been a long user of romcat... but would like to use the new corel connect. i use the folders selected to my HD folder that has all my cdr files (20yrs worth from ver 1). when i type in a search word that is in 100's of my cdr files keywords... connect doesnt display them. In romcat it does display them, even older files, with the same key word. connect only shows cdr files that have in its file name part of the search word, but seems to ignore the key words in the files.
I have all my job files with important key words within them, but the actual file names are simple job numbered names. i noticed on searches from X5 content on dvd, the files also are just numbers, but the search finds key words.
I can connect to jp2 aerials via FDO but the images do not come in. They work fine with raster insert, why not FDO?
View 3 Replies View RelatedI use hp 5 buttons optical comfort mouse, windows 7 and autocad 2012. I do not know how to connect 4 and 5 buttons with autocad. i have already tried customize user interface with no success.
View 4 Replies View RelatedI've started connecting to Raster (.sid) Aerials thru mapwspace rather than inserting them thru the Planning and Analysis Workstation due to greater control with gray scale and resampling raster and such. I started noticing after I save, I can't select anything in my drawing. I was connected to a whole county Aerial .sid file, so i thought maybe if I only connect to individual tiles for my project area which consisted of 9 .sid files, the issue would go away. It didn't. I tried typing REA, purge, audit, then eventually I would crash.
Is there something wrong with FDO connections with .sid files thru mapwspace in C3D 2013???
Look at the picture i attached
Pic 1 = i create a simple route for piping with branch
Pic 2 = after i create that route and click on populate Route i got this model
Pic 3 = when i go closer and zoom on the fitting i have this model
I'm trying to construct a complex corridor of urban highway. To simplify corridor i've made assemblies for each side of the road (see picture). This solves problem of countless number of regions (and assemblies) that I'll need to set if assemblies are for whole profile.
The problem with seperate assemblies for each side of the road is that I cannot connect them using Median subassembly because Marked point and Median are in different assemblies.
I have tried the XREF route to look to another drawing to bring in my NED files instead of putting my NEDS with my shapes and point data. The drawing that contains the NEDS were brought in using data connect. When I xref the NED drawing into a new drawing, nothing shows up. Zoom Extents does not show anything nor does anything appear to be turned off. When I do the xref, I see the image of the tiled NEDS and click on use georeferenced location (because I am trying to trick the neds to stay together but translate together). Is there a better way or what could I be missing to get it to show.
Autodesk 2014 Infrastructure Design Suite - Premium
Windows 7 Professional, x64
I have a little problem with trim in autocad 2012. After trimming some lines that cut through a circle there's a big gap between the circle and line, so there's no way i can create a polyline. How do I fix it?
here is the figure w/o trimming
pic1.png
Here it is after trimming
pic2.png
And as you can see there is space between the lines. How can I get the line to connect to the circle?
pic 3.png
i'm trying to add a WMS connection to theOpenstreetMap service, but i receive error message "impossibile connect"
I tried several link adresses, but the results still remain the same. I don't use proxy servers.
I am using AutoCAD MAP 3D 2013 32 bit version. In this, I can find connection with Arch GDB. But when I am going to connect it shows the error and the provided conection is for Arch GIS 9.3 only.
How can I get FDO for ArchGIS 10.0
When you paste a surface into another how does it connect the surfaces? Does it create a vertical wall where at the edge of the paste surface? Can you tell it to grade a certain slope to the surface you are pasting into?
View 1 Replies View RelatedTrying to connect to raster data through FDO Provider , 3D Map for Geospatial, raster formats are Drg, MrSid, Tiff and ECW, all formats load up but do not display, using Autocad Civil 3D 2008.
View 9 Replies View RelatedHow to connect to SQL Server 2008 r2 by using Map 3D 2012? I can't to make it. It prompts the message "Invalid connection". I used the IP as the service name of map 3d.
View 9 Replies View RelatedJust getting started, gone through all the tutorials back in 2008...
first time I've actually tried to make something,
Can't use the sketch b/c there's probably a gap in the outline, is there a quick fix?
(Did the entire thing in snap to grid, was hoping there's a function to either connect lines all at once, or ignore Extremely small gaps).
I have one computer that can't connect to the Vault Server. It use to work fine and I am not sure what happened. I have gone to the extreme of uninstalling and re-installing and still nothing. I am in the same project as when it was working. I have checked the Application Options Content Center and made sure that the Access Options is set to Autodesk Vault Server.
When I click on Vault Server, everything is grayed out except "Log In" and "Connection Options". If I click on either of them the dialog box goes away and nothing happens. No error dialogs nothing. If I go to the project amd click on the Configure Content Center Libraries button it just disappears and nothing happens. Not sure what else to do.
I have 4 corridors on same alignments (pics1). I created materials for each corridors (pic2). Then I created multiple section view for each corridor (pic3) ( for all corridors in section view table tab, i added corridors own materials). but cumulative material volume reset to zero at each new corridors beginning. In my project, corridors cumulative material volume value should continue from the previous corridor's value. Can i connect this volume tables or can i merge corridors ?
View 6 Replies View RelatedI used connect to data to connect to a shapefile of parcels in NAD83 TX-SF. When I measure a specific parcel with MAPDIST or MEASUREGEOM i get 140 feet but when I check the distance in ArcGIS I get 156'. The 156' is correct. It's not just that shapefile, the conversion is consistent with other imported data. The ratio is about 1.114
I'm new to AutoCAD MAP most of my experience is with ArcGIS?
I am using the map connect command to import a geotiff file to NAD83 coordinates. After import, the image displays correctly at the correct location, however my xref manager indicates that the image file location is in my local app folder within the C drive on my computer even though I specified the target base file on our network server. I also noticed the map connect function converts the files to a png file.
Because the image link resides on my computer others cannot view the image when they open the drawing. I don't fully understand how the map connect function works, do I need to use the map insert command if I want the image to be hard linked into the drawing?
How do I connect two lines that have set lengths and set points at the other end
View 1 Replies View RelatedC3D 2012 SP1
I am trying to connect to a dwg database via com interop. Here is the
using System;using System.Diagnostics;using System.IO;using System.Windows.Forms;using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.Runtime;using Autodesk.AutoCAD.EditorInput;using Autodesk.AutoCAD.Interop;using Autodesk.AECC.Interop.UiLand;namespace Proj2{
[code].......
We have a SQL Server instance that I connect to over our network. I can access it when I log into SQL Server Management Studio. In AutoCAD Map 3D 2014 I do not have the option to "Add SQL Server Connection". I tried using the SQL Server Spatial connection but the database does not have spatial data. I only see a list of tables but they cannot be added as feature classes and display the message "The feature class doesn't exist" when I click on a table. I also don't have the SQL ServerProvider.dll in the FDO folder. I tried copying the .dll from version 2012 but it didn't work.
How do I connect to my non-spatial data in SQL Server? Is this a permissions issue?
All of a sudden, my line tool in sketch mode does not connect segment to segment and each individual line can be dragged wherever. This also means I cannot extrude any shapes I make because inventor does not realize the series of line segments create a closed shape. This happens across all part files, old and new.
View 3 Replies View RelatedIs there a way to connect Map 3D 2006 to an ArcIMS database, and view the data as a raster image overlay? This would be a very useful capability, but although I've come across ways of connecting directly to the ArcSDE server, I can't find any way of viewing data from ArcIMS.
View 3 Replies View Related
