AutoCAD Civil 3D :: Connect To DWG Database Via Com Interop

Mar 23, 2012

C3D 2012 SP1

I am trying to connect to a dwg database via com interop. Here is the
using System;using System.Diagnostics;using System.IO;using System.Windows.Forms;using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.Runtime;using Autodesk.AutoCAD.EditorInput;using Autodesk.AutoCAD.Interop;using Autodesk.AECC.Interop.UiLand;namespace Proj2{

View 4 Replies


AutoCAD Map 3D :: 2006 - Way To Connect To ArcIMS Database

Nov 30, 2005

Is there a way to connect Map 3D 2006 to an ArcIMS database, and view the data as a raster image overlay? This would be a very useful capability, but although I've come across ways of connecting directly to the ArcSDE server, I can't find any way of viewing data from ArcIMS.

View 3 Replies View Related

AutoCAD Inventor :: How To Connect To PHC SQL Crystal Reports Database

May 8, 2013

how to connect the Inventor db to PHC db ?

Its an SQL Crystal db on manufactor... but I dont know what is of the inventor...

View 3 Replies View Related

AutoCAD Civil 3D :: Is There Limitations For Interop To Feature Lines

Nov 7, 2013

I want to do this: get vertex of feature lines.However, I have to select a Reference:Autodesk.AECC.Interop.Land

Can I use that Reference for Civil 3D 2014? is there limitations for Interop in Civil 3D to feature lines?

I use(agreate) all these References Autodesk. AEC.Interop. BaseAutodesk. AEC.Interop. UiBaseAutodesk. AutoCAD. InteropAutodesk. AutoCAD. Interop. CommonAutodesk.AECC.Interop.<domain>Autodesk.AECC.Interop.Ui<domain>

View 4 Replies View Related

AutoCAD .NET :: Export To WMF Without Using Interop

Jul 1, 2013

I would like to export a DWG file to WMF. I've read in the forum I need to add Autodesk.Autocad.interop.dll and Autodesk.Autocad.interop.common.dll, but with these references the interface displays too many duplicate definitions.

How can I do without using Interop references?

View 9 Replies View Related

AutoCAD Civil 3D :: FDO Connect To SID

Nov 21, 2013

I've started connecting to Raster (.sid) Aerials thru mapwspace rather than inserting them thru the Planning and Analysis Workstation due to greater control with gray scale and resampling raster and such.  I started noticing after I save, I can't select anything in my drawing.  I was connected to a whole county Aerial .sid file, so i thought maybe if I only connect to individual tiles for my project area which consisted of 9 .sid files, the issue would go away.  It didn't.  I tried typing REA, purge, audit, then eventually I would crash.

Is there something wrong with FDO connections with .sid files thru mapwspace in C3D 2013???

View 1 Replies View Related

AutoCAD .NET :: Interop Excel Error

Mar 25, 2013

What happen? Error occurred when COM interop Autocad 2012 with excel 2010.

View 8 Replies View Related

AutoCAD Civil 3D :: How To Connect Assemblies

May 3, 2013

I'm trying to construct a complex corridor of urban highway. To simplify corridor i've made assemblies for each side of the road (see picture). This solves problem of countless number of regions (and assemblies) that I'll need to set if assemblies are for whole profile.

The problem with seperate assemblies for each side of the road is that I cannot connect them using Median subassembly because Marked point and Median are in different assemblies. 

View 3 Replies View Related

AutoCAD Civil 3D :: How To Connect The Surfaces

Nov 2, 2013

When you paste a surface into another how does it connect the surfaces?  Does it create a vertical wall where at the edge of the paste surface?  Can you tell it to grade a certain slope to the surface you are pasting into?

View 1 Replies View Related

AutoCAD .NET :: Difference While Doing Customization With Database / Without Database Services

Aug 6, 2013

I am working on the AutoCAD customization and doing the same by VB.Net & C#.Net. But I just want to know the difference as mentioned below:

1. Insert Block In AutoCAD

Using VB.Net without using DataBase services..Only 1 statement is required to Insert the Block objAcadDocument.ModelSpace.InsertBlock(Required Arguments are here) Using C#.Net with DataBase services

There are many statments are there to insert only 1 block..Like Start Transaction, Lock the document, Get the Object Id Block etc...So my quetion is that when I have to use DataBase services and when not 

what is the advantage of doing customization using DataBase services rather than go for wihout DataBase services.?

View 4 Replies View Related

AutoCAD .NET :: Getting Save As Settings Without Doing Interop Stuff

Feb 21, 2013

@The moment i am trying to get the saveAs settings that were used when the user hits the save/saveAs button in autocad.

My addin needs to store the current document with these settings. i dont want to use some pop-up dialog.

The .currentVersion property saves the document with the applicationversions standard saveprofile.

I need some kind of property that reflects the users saveAs settings.

Is there any way getting those information via the .net api without doing the interop stuff?

View 5 Replies View Related

AutoCAD .NET :: Can't Find DimStyleTable Record In Interop

May 11, 2013

find DimStyleTablerecord in interop services.I can see DimStyle class.But i dont how to set dimension Style variables with this..Should i add any reference to my project or i miss something..

View 3 Replies View Related

AutoCAD .NET :: Publish Multiple Page PDF Using Interop

Dec 4, 2012

I want to plot of .dwg file(with Multiple Layouts) as PDF using interop services, where PDF should contain all the layouts.

View 1 Replies View Related

AutoCAD Civil 3D :: Connect To Raster Data

Jul 22, 2008

Trying to connect to raster data through FDO Provider , 3D Map for Geospatial, raster formats are Drg, MrSid, Tiff and ECW, all formats load up but do not display, using Autocad Civil 3D 2008.

View 9 Replies View Related

AutoCAD Civil 3D :: Connect Volume Tables

Aug 25, 2012

I have 4 corridors on same alignments (pics1). I created materials for each corridors (pic2). Then I created multiple section view for each corridor (pic3) ( for all corridors in section view table tab, i added corridors own materials). but cumulative material volume reset to zero at each new corridors beginning. In my project, corridors cumulative material volume value should continue from the previous corridor's value. Can i connect this volume tables or can i merge corridors ?

View 6 Replies View Related

AutoCAD Civil 3D :: Map Connect Link To Geo Tiff

Jun 6, 2013

I am using the map connect command to import a geotiff file to NAD83 coordinates.  After import, the image displays correctly at the correct location, however my xref manager indicates that the image file location is in my local app folder within the C drive on my computer even though I specified the target base file on our network server.   I also noticed the map connect function converts the files to a png file.  

Because the image link resides on my computer others cannot view the image when they open the drawing.  I don't fully understand how the map connect function works, do I need to use the map insert command if I want the image to be hard linked into the drawing?

View 3 Replies View Related

AutoCAD Civil 3D :: How To Connect Subassembly To Point 2

Apr 20, 2013

I created one section with two assemblies. Main line assembly and offset (second line) assembly. Each assembly has its own alignment and profile.In strait its all ok, but in curve I get strange situation, that I try to solve. (look to the picture)

I add Mark points on Point 1 and 3. Then connect them using Link Slopes Between Points. Knowing that Point 2 is not static, but moving point I can't find any way to connect subassembly edge point to that Point 2.

So how can I connect subassembly to Point 2? Or maybe there is a smarter way to connect points 1 and 3. Slope from 1 to 2 should be 50:1 and from 2 to 3 should be 1.5:1

View 5 Replies View Related

AutoCAD Civil 3D :: How To Connect Point And Link

May 15, 2013

my problem is i want to connect shoulder point and the daylight link with the same slope as my is much more clear in the attached photo.

Civil 3D 2014 x64
Windows 7 64-bit

View 5 Replies View Related

AutoCAD Civil 3D :: MAP Connect To Map Info (using 2013)

Oct 3, 2012

We use map info as our native GIS and can use these .TAB files with MAPIMPORT in C3D, but what I would really like to do is use MAPCONNECT like can be done for .SHP files, etc.. I've inquired with [URL].....and they have confirmed that their FME product doesn't support 2013.

View 8 Replies View Related

AutoCAD Civil 3D :: Survey Database Coordinates Off

Feb 23, 2012

i have a point file specifically a PNEZD file. when i import points into the survey database the coordinate in the database is correct but the coordinate on the drawing tends to be 5 feet off one way and 1 foot off the other. When I import point through the points pull-down menu the coordinates are correctly shown. When I import point into survey database from drawing the coordinate is incorrect in the database but correct on screen.

View 3 Replies View Related

AutoCAD Civil 3D :: Moving A Survey Database

Dec 7, 2011

Are there any issues with coping a survey database to different directory?

View 3 Replies View Related

AutoCAD Civil 3D :: Survey Point Database

Mar 6, 2012

How are you or your company managing points as in field shots, storage, dulplicate point numbers?

are you using vault?
are you using the point database?
are you using one drawing file to import and store the points?

what we are doing now is using the point database as a storage location but it fails for notification on when a point # is duplicated.

surveys has a drawing file they use to import, store and build the existing ground surface from the points. this allows the notification of when a  point  number is duplicated. but it is not as secure or flexable as the old LDD way.

We don't use field books just text files from the collectors imported in. Vault is not an option for us. (at this time)

so what i am looking for is how others are adapting to this change, and what worked or not.

Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014

View 9 Replies View Related

AutoCAD Civil 3D :: Delete Survey Database

Jan 19, 2010

I am running AutoCAD Civil 3D 2010. I am a new user and just going through some tutorials and created a couple of survey databases for practice. The problem I am having is I can't figure out how to delete them. When I exit Civil 3D and restart it, those databases are still there under the survey tab in Toolspace even though I haven't even opened a drawing yet. Also, do I need MS Access installed on my workstation to run any functions within Civil 3D?

View 5 Replies View Related

AutoCAD Civil 3D :: Survey Database Is Not Readable

Apr 4, 2012

One of my users is getting the following error when creating a survey database.

It always stops at the same size? How do we resolve this? The user has full access as well.

View 1 Replies View Related

AutoCAD Civil 3D :: Survey Figures Not Associated To Database

Jul 18, 2012

I have a drawing that is about a month old with survey data and a surface in it. I went in to modify the surface and noticed a crossing breakline message that was never addressed. I attempt to do a grip edit on the survey figure that is crossing ,and update the database from drawing and I get a message saying the figure is in not in the database. I know I have the correct database, because if I select the figure in the prospector tab It highlights the one I'm working with. Somehow the objects in the drawing have lost association with the database.

Any solutions short of re-inserting all my figures from the database? I'm not going to do that in this case since the edit was small and is already done.

(running C3D 2012 sp4, Win7 64bit, 8GB)

View 3 Replies View Related

AutoCAD Civil 3D :: Figure Prefix Database

Aug 25, 2013

I am trying to work on my figure database and have run into an issue I don't understand. Curious as to weather or not it's something I am doing, or just a bug.

I wanted to look at every possible line that could be imported so I created a dummy point file using the Figure prefix data base and imported it into one of my blank templates and ran into to curious issues.

Issue 1

CP is connecting to AA

Issue 2

OC only connects if the point has an identifier behind the OC, for example OC01.

Here is a copy of the figure database and point file I am using. I understand you will not have my layers, but the connectivity should be the same. Let me know if you need anything else.

View 7 Replies View Related

AutoCAD Civil 3D :: Import CSV Files Into Database

Apr 25, 2013

I have imported csv files into my database but after closing the database and reopening I cannot import any more files. I can only import the events that I already brought in into the current drawing.  Is this a common issue? How do you fix this?

C3D2012 SP2


View 2 Replies View Related

AutoCAD Civil 3D :: Data Connect And Transformation Settings

Jul 29, 2013

I have geotif images that I've purchased from Washoe County GIS. They have world files that work great with data connect. That is, as long as I want to work at sea level. We have a Combined Factor mandated by the County for all record maps. it's a simple grid to ground factor. I can set this factor in the drawing settings and import my sea-level coordinate files just fine. The pboblem is that I can't get the Data Connect to work with the transform settings.The problem is the same with Geotif files and SHP files. I've tried using an x-reference drawing to insert the Geotif and then scale up the geotif but the imagery doesn't scale up.

Is it a program bug that keeps Data Connect from recognizing the transformation settings?

View 7 Replies View Related

AutoCAD Civil 3D :: Pipe Networks - Connect To Part

Jun 5, 2013

I have a 18' x 10' special structure where I'd like to be able to connect the pipes as shown to the structure but I'm not aware of any way to force the Connection point of the pipe to the desired location along the structure.

Normal behavior is to connect all pipes to the same insertion point or center of to go about maintaining pipe connection orientation to reflect the design requirements?

View 9 Replies View Related

AutoCAD Civil 3D :: Insert SID File Using Data Connect

Jul 26, 2013

I am trying to insert an Mr Sid file using Data Connect. I am running 2011 C3D. When I try adding the file to the dwg, it tries to execute the query, but then I get an error "There was a problem adding data to map."

The folder containing the SID file has two other files...the .sdw file and the metadata file. Is there another file missing? Or is the SID file too's 1.6GB.

View 3 Replies View Related

AutoCAD Civil 3D :: LandXML Import - Survey Database

Aug 27, 2013

Well I have a LandXML and I import the file into the SDB, it gives me line work but only Station Setups. I have no turned angles or points short of the Occupation Points. What is going on here. I have tested this in C3D12 on one PC C3D13 & 14 on another PC and have the same issue. However a co-worker imports to a student version of 12 using my template and gets points and lines.

View 8 Replies View Related

Copyrights 2005-15, All rights reserved