AutoCAD Map 3D :: Openstreetmap / Unable To Connect Via FDO

May 24, 2013

i'm trying to add a WMS connection to theOpenstreetMap service, but i receive error message "impossibile connect"

I tried several link adresses, but the results still remain the same. I don't use proxy servers.

View 1 Replies


ADVERTISEMENT

AutoCAD Map 3D :: Unable To Connect To Excel File Using ODBC FDO Provider

Apr 20, 2012

I have an excel spreadsheet of boreholes. The spreadsheet has the format of ID, X, Y, Z

I have tried using the 'Connect to Data' feature in Map 3D 2012 64 bit.

The ODBC connection is created and tests correctly. After connecting to the ODBC DSN and loggin in, I am able to see the fields identified in the excel file. There is also the Class available from the named range in the excel spreadsheet.

I select my Identity Property, X, Y, and Z - but that's as far as I can go. I have no opportunity to set the coordinate system and the 'connect' button does not activate.

Using Win 7 64 bit - and I have the 64 bit ODBC driver's installed.

View 9 Replies View Related

Paint Shop Pro :: X3 - Unable To Connect To Scanner?

Oct 24, 2011

I have had PSP X3 for sometime but have never been able to connect to my scanner. The options for Twain acquire and Twain Source are dimmed. Everything works fine with PSP X2 but since upgrading I can no longer use my scanner. I've tried to log a question with the knowledge base but for some obscure reason I am unable to get that to work.

View 2 Replies View Related

Photoshop Elements :: Unable To Connect With 10 / Error 400

Aug 25, 2013

Usually when I bring up Elements 10, it says welcome back Kenny,now when I type in my password it is showing Error 400. I have tried several times to create a new ID.....no luck. It just started doind this last night. What do I need to do?

View 3 Replies View Related

Photoshop Elements :: Unable To Connect Online With 10

Aug 26, 2013

I am trying to connect with Adobe Elements 10 on line. Normally when I bring up Elements, it says "Welcome Back Kenny" this is what it says now! Photoshop.com services are currently unavailable. try again, or check your network connections. Error 400. I have never had this happen before. I am for sure on line.

View 7 Replies View Related

Paint Shop Pro :: Project Creator Unable To Connect

Apr 8, 2011

I just purchased the PSP X3 Ultimate. Installed everything with no issue. Rebooted edited a photo saved it then opened Project Creator to upload it to Facebook. Put in my correct email and password. Yet I get the error of:

Unable to connect Please check your network connection.

the same machine that has PSP/Project Creator there is nothing wrong with my network connection. I've checked my UN/PW for Facebook and my connection and everything is correct.

It appears I can not even connect via PSP to check for updates etc.

View 10 Replies View Related

Photoshop Elements :: Unable To Connect To Editor Application

Aug 26, 2013

Received the message " unable to connect to editor application". What do I do ?

View 1 Replies View Related

Lightroom :: Unable To Connect To Host Using Flickr Publish Service

Jun 11, 2010

I'm trying to export photos to Flickr using the Flickr publish service. When I try to log in to Flickr in order to authenticate my account, I get the error message "Could not contact the Flickr web service. Please check your Internet connection." Similarly, I have tried to use Jeff Friedl's "Export to Flickr" plugin. When I try to enable this plugin, Lightroom can't contact Flickr - I get the error message "cannotconnectToHost", and Lightroom just keeps retrying to connect with no success.
 
I have Internet access, and can log into Flickr without any problems using my browser.

View 10 Replies View Related

Corel CONNECT X5 :: Connect Search Doesn't Recognize Keywords In CDR Files

Feb 15, 2012

i have been a long user of romcat... but would like to use the new corel connect. i use the folders selected to my HD folder that has all my cdr files (20yrs worth from ver 1). when i type in a search word that is in 100's of my cdr files keywords... connect doesnt display them. In romcat it does display them, even older files, with the same key word. connect only shows cdr files that have in its file name part of the search word, but seems to ignore the key words in the files.

I have all my job files with important key words within them, but the actual file names are simple job numbered names. i noticed on searches from X5 content on dvd, the files also are just numbers, but the search finds key words.

View 2 Replies View Related

AutoCAD Map 3D :: Connect JP2 Via FDO

Mar 7, 2012

I can connect to jp2 aerials via FDO but the images do not come in. They work fine with raster insert, why not FDO?

View 3 Replies View Related

AutoCad :: How To Connect 4 And 5 Buttons

Dec 16, 2011

I use hp 5 buttons optical comfort mouse, windows 7 and autocad 2012. I do not know how to connect 4 and 5 buttons with autocad. i have already tried customize user interface with no success.

View 4 Replies View Related

AutoCad :: How To Use DB Connect With Oracle

Nov 30, 2011

I have a new requirement from company to save a static drawing's dimensions' data into DB table. We have hundreds of drawings. DBConnect connects with oracle using ODBC. But how it is possible that we draw a drawing and its attributes are saved in DB.

View 3 Replies View Related

AutoCAD Civil 3D :: FDO Connect To SID

Nov 21, 2013

I've started connecting to Raster (.sid) Aerials thru mapwspace rather than inserting them thru the Planning and Analysis Workstation due to greater control with gray scale and resampling raster and such.  I started noticing after I save, I can't select anything in my drawing.  I was connected to a whole county Aerial .sid file, so i thought maybe if I only connect to individual tiles for my project area which consisted of 9 .sid files, the issue would go away.  It didn't.  I tried typing REA, purge, audit, then eventually I would crash.

Is there something wrong with FDO connections with .sid files thru mapwspace in C3D 2013???

View 1 Replies View Related

AutoCAD Inventor :: How To Connect Pipe To TEE

Jul 12, 2013

Look at the picture i attached

Pic 1 = i create a simple route for piping with branch
Pic 2 = after i create that route and click on populate Route i got this model
Pic 3 = when i go closer and zoom on the fitting i have this model

View 5 Replies View Related

AutoCAD Civil 3D :: How To Connect Assemblies

May 3, 2013

I'm trying to construct a complex corridor of urban highway. To simplify corridor i've made assemblies for each side of the road (see picture). This solves problem of countless number of regions (and assemblies) that I'll need to set if assemblies are for whole profile.

The problem with seperate assemblies for each side of the road is that I cannot connect them using Median subassembly because Marked point and Median are in different assemblies. 

View 3 Replies View Related

AutoCAD Map 3D :: DWG Insert That Contains Data Connect

May 15, 2013

I have tried the XREF route to look to another drawing to bring in my NED files instead of putting my NEDS with my shapes and point data.  The drawing that contains the NEDS were brought in using data connect.  When I xref the NED drawing into a new drawing, nothing shows up.  Zoom Extents does not show anything nor does anything appear to be turned off.   When I do the xref, I see the image of the tiled NEDS and click on use georeferenced location (because I am trying to trick the neds to stay together but translate together).  Is there a better way or what could I be missing to get it to show. 

Autodesk 2014 Infrastructure Design Suite - Premium
Windows 7 Professional, x64

View 9 Replies View Related

AutoCad :: Get The Line To Connect With Circle?

May 24, 2012

I have a little problem with trim in autocad 2012. After trimming some lines that cut through a circle there's a big gap between the circle and line, so there's no way i can create a polyline. How do I fix it?

here is the figure w/o trimming

pic1.png

Here it is after trimming

pic2.png

And as you can see there is space between the lines. How can I get the line to connect to the circle?

pic 3.png

View 4 Replies View Related

AutoCAD Map 3D :: 2013 Connect To Arch GIS GDB 10.0?

Jul 6, 2013

I am using AutoCAD MAP 3D 2013 32 bit version. In this, I can find connection with Arch GDB. But when I am going to connect it shows the error and the provided conection is for Arch GIS 9.3 only.

How can I get FDO for ArchGIS 10.0

View 2 Replies View Related

AutoCAD Civil 3D :: How To Connect The Surfaces

Nov 2, 2013

When you paste a surface into another how does it connect the surfaces?  Does it create a vertical wall where at the edge of the paste surface?  Can you tell it to grade a certain slope to the surface you are pasting into?

View 1 Replies View Related

AutoCAD Civil 3D :: Connect To Raster Data

Jul 22, 2008

Trying to connect to raster data through FDO Provider , 3D Map for Geospatial, raster formats are Drg, MrSid, Tiff and ECW, all formats load up but do not display, using Autocad Civil 3D 2008.

View 9 Replies View Related

AutoCAD Map 3D :: Connect To SQL Server 2008 R2 By 2012?

May 11, 2011

How to connect to SQL Server 2008 r2 by using Map 3D 2012? I can't to make it. It prompts the message "Invalid connection". I used the IP as the service name of map 3d.

View 9 Replies View Related

AutoCAD Inventor :: How To Connect All The Lines For A Sketch

Dec 14, 2011

Just getting started, gone through all the tutorials back in 2008...

first time I've actually tried to make something,

Can't use the sketch b/c there's probably a gap in the outline, is there a quick fix?

(Did the entire thing in snap to grid, was hoping there's a function to either connect lines all at once, or ignore Extremely small gaps).

View 5 Replies View Related

AutoCAD Inventor :: Can't Connect To Vault Server

Jan 23, 2013

I have one computer that can't connect to the Vault Server.  It use to work fine and I am not sure what happened.  I have gone to the extreme of uninstalling and re-installing and still nothing.  I am in the same project as when it was working.  I have checked the Application Options Content Center and made sure that the Access Options is set to Autodesk Vault Server.

When I click on Vault Server, everything is grayed out except "Log In" and "Connection Options".  If I click on either of them the dialog box goes away and nothing happens.  No error dialogs nothing.  If I go to the project amd click on the Configure Content Center Libraries button it just disappears and nothing happens.  Not sure what else to do.

View 1 Replies View Related

AutoCAD Civil 3D :: Connect Volume Tables

Aug 25, 2012

I have 4 corridors on same alignments (pics1). I created materials for each corridors (pic2). Then I created multiple section view for each corridor (pic3) ( for all corridors in section view table tab, i added corridors own materials). but cumulative material volume reset to zero at each new corridors beginning. In my project, corridors cumulative material volume value should continue from the previous corridor's value. Can i connect this volume tables or can i merge corridors ?

View 6 Replies View Related

AutoCAD Map 3D :: Connect To Shapefile - Measure Discrepancy

Feb 8, 2013

I used connect to data to connect to a shapefile of parcels in NAD83 TX-SF. When I measure a specific parcel with MAPDIST or MEASUREGEOM i get 140 feet but when I check the distance in ArcGIS I get 156'. The 156' is correct. It's not just that shapefile, the conversion is consistent with other imported data. The ratio is about 1.114

I'm new to AutoCAD MAP most of my experience is with ArcGIS?

View 4 Replies View Related

AutoCAD Civil 3D :: Map Connect Link To Geo Tiff

Jun 6, 2013

I am using the map connect command to import a geotiff file to NAD83 coordinates.  After import, the image displays correctly at the correct location, however my xref manager indicates that the image file location is in my local app folder within the C drive on my computer even though I specified the target base file on our network server.   I also noticed the map connect function converts the files to a png file.  

Because the image link resides on my computer others cannot view the image when they open the drawing.  I don't fully understand how the map connect function works, do I need to use the map insert command if I want the image to be hard linked into the drawing?

View 3 Replies View Related

AutoCAD LT :: Connect Two Lines That Have Set Lengths And Set Points At The Other End

May 31, 2012

How do I connect two lines that have set lengths and set points at the other end

View 1 Replies View Related

AutoCAD Civil 3D :: Connect To DWG Database Via Com Interop

Mar 23, 2012

C3D 2012 SP1

I am trying to connect to a dwg database via com interop. Here is the
 
using System;using System.Diagnostics;using System.IO;using System.Windows.Forms;using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.Runtime;using Autodesk.AutoCAD.EditorInput;using Autodesk.AutoCAD.Interop;using Autodesk.AECC.Interop.UiLand;namespace Proj2{
[code].......

View 4 Replies View Related

AutoCAD Map 3D :: How To Connect To Non-spatial Data In SQL Server

Nov 20, 2013

We have a SQL Server instance that I connect to over our network. I can access it when I log into SQL Server Management Studio. In AutoCAD Map 3D 2014 I do not have the option to "Add SQL Server Connection". I tried using the SQL Server Spatial connection but the database does not have spatial data. I only see a list of tables but they cannot be added as feature classes and display the message "The feature class doesn't exist" when I click on a table. I also don't have the SQL ServerProvider.dll in the FDO folder. I tried copying the .dll from version 2012 but it didn't work.

How do I connect to my non-spatial data in SQL Server? Is this a permissions issue?

View 6 Replies View Related

AutoCAD Inventor :: Lines Do Not Connect For Extrusion

Jun 9, 2012

All of a sudden, my line tool in sketch mode does not connect segment to segment and each individual line can be dragged wherever. This also means I cannot extrude any shapes I make because inventor does not realize the series of line segments create a closed shape. This happens across all part files, old and new.

View 3 Replies View Related

AutoCAD Map 3D :: 2006 - Way To Connect To ArcIMS Database

Nov 30, 2005

Is there a way to connect Map 3D 2006 to an ArcIMS database, and view the data as a raster image overlay? This would be a very useful capability, but although I've come across ways of connecting directly to the ArcSDE server, I can't find any way of viewing data from ArcIMS.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved