I used connect to data to connect to a shapefile of parcels in NAD83 TX-SF. When I measure a specific parcel with MAPDIST or MEASUREGEOM i get 140 feet but when I check the distance in ArcGIS I get 156'. The 156' is correct. It's not just that shapefile, the conversion is consistent with other imported data. The ratio is about 1.114
I'm new to AutoCAD MAP most of my experience is with ArcGIS?
i have been a long user of romcat... but would like to use the new corel connect. i use the folders selected to my HD folder that has all my cdr files (20yrs worth from ver 1). when i type in a search word that is in 100's of my cdr files keywords... connect doesnt display them. In romcat it does display them, even older files, with the same key word. connect only shows cdr files that have in its file name part of the search word, but seems to ignore the key words in the files.
I have all my job files with important key words within them, but the actual file names are simple job numbered names. i noticed on searches from X5 content on dvd, the files also are just numbers, but the search finds key words.
Is there a way of exporting an sdf to a shapefile in AutoCAD Map 3D 2010?
View 9 Replies View RelatedI'm brand new with Autocad 3D 2011.
I have a plat map that I used topopgraphy to create polygons of all the lots. Each lot has a lot number created as text (not mtext or a block) on a layer that is separate from the layer with the polygons. I need to export the polygons as a shapefile and be able to access them in reference to their lot number. This information should be included with the .dbf file. I can export the lot polygons as a shapefile but the lot numbers are not included. I suspect that I need to do something with getting the centroid to include the lot number text (which I was not able to do successfully.) And then include that with the polygon/data export.
Civil3d 2012
If you attach a shapefile through "Connect to Data" and try to zoom to extents by right clicking on the shapefile under "Task Pane" it zooms to a different location. The shapefile and drawing PRJ is in LL84. It works in Civil3D2010 but not in 11 or 12. I have Service pack 3 installed. Why?
When exporting 3D contours, what property do you use to export the elevation to attribute data in the shapefile?
View 2 Replies View RelatedI have a shapfile of multipart line features (i.e. polylines) I draped them on a 3d surface in GRASS GIS and exported a shapefile. now how do i get that shapefile to display in 3D inside civil 3D through FDO connection?
second part: how do I import that shapefile as a 3D polyline into Civil3D to generate breaklines?
If found that sometimes I need to have shapefile ony with one type of attributes.
It's easy to do querry in data connect but somehow I didn't find a way to export querred objects to independede shapefile.
I have a series of polylines with a global width of 5m which I want to export to a polygon shapefile to represent in GIS. I realised if I create a shapefile of the polylines and then create a buffer of 2.5m on either side I can create my desired polygon. My question is how do I export this polygon to a shapefile. I have tried bulk copy but this just seems to revert the buffer back to a polyline shapefile .
View 4 Replies View RelatedI've got a drawing that shows the site boundary for a planning application, its just a polyline drawn round xref mapping. A client wants us to export this to a shapefile, or as ESRI format I've heard (its all a bit vague). I believe they want to have it as a Mapinfo layer.
The client has sent through some 'instructions' that are I've never even heard of ESRI format before.
I am attempting to print an artwork that is 100 cm long, however when we get the print out, we see that it is not correct to size. Instead the print out is approximately 93 cm long.
View 2 Replies View RelatedMy client gave me her logo in .EPS format, which I opened using Illustrator. The logo color was Pantone 274C. However, while working on the same EPS file in Photoshop, I realised, when I eyedropped the same color, Photoshop tells me its 2756C, and it does look duller in the workspace. I'm working in CMYK for both programs.
What could be the problem. Is there any way to solve this?
I have a question about exporting a 2d drawing to a Shapefile. I have checked out the Help file supplied with AutoCAD Civil #D 2013.
View 6 Replies View RelatedI'm new (again) to using AutoCAD and am a GIS user. I just wanted to know if there was a way to import an ESRI shapefile (.shp extension) into AutoCAD 2011. This is the only version I have and don't really have any extensions with it. Can I do this or do I need different software?
View 8 Replies View RelatedI have several shapefiles that I have brought into a new autoCad drawing all with the same coordinate system. All display fine when zoomed out to the extents but when I zoom in the features disappear. The scaling is set to the default 0 to infinity onside of the styling so they should disappear like they are or like one would think if that was set to something else.
I also can not snap to these features while zoomed in either.
Having the following problem when exporting shapefiles in Map2014 or Civil2014. Im able to import but when i go to export it gives me the following error... Export did not succeed.
I've tried the Providers.xml file replacement but that didn't worked.
Is there a way to do massive export of dwg file to shapefile by layer?
I have number of drawings that need to be converted to shapefile and I don't want to do export layer by layer.
Whenever I Output a shapefile it shortens the name of my attributes. I am using the Map 3d Export, i selected my objects, then select Data tab and select my block, and click ok. Then when i go to load the shapefiles into the database it has shortend the name of my attributes.
View 6 Replies View RelatedWhen I use the command "mkshape" I am getting shape file, but this file i am unable to attach in Arc GIS 9.3..When I export shape file in Arc GIS how to import it in Auto CAD 2012."How to export drawings to shapefile and how to import shape files to drawing file in AutoCad 2012."
View 0 Replies View RelatedSame photo is showing smaller image size inside Photoshop than what the finder is indicating. I am using Photoshop CS6. Mac OS X v10.7.5.
View 12 Replies View RelatedI've had both CS5 and now CS6 on a Dell i7 with an HD5770 video card and tons of memory. For some reason I can't get the same kind of results that I see others get in HDR Pro. I've watched tons of example vids and in almost every example, what shows in the preview window is what is returned back to PS after hitting ok.
Not so on my computer. What my HDR looks like in the preview window is almost nothing like what it looks like when returned to PS. The contrast and exposure is usually quite different. The effect of the radius and strength sliders seems much more exagerated.
I used a commercial scanning system at the local library that saved files via THE GIMP as a png file.  I saved the file to flash drive and copied to my desktop at home.  On my desktop, the file is 21.3 MB in size.Â
I load it with Photoshop CS4 and immediately save it.  The file size is now 1.6 MB. I compare the two files side by side and find that the pixel per inch are the same on both (4720X4720) and neither is compressed.   Both images appear to be identical.  What is the reason for the dramatic difference in file size?Â
We have tested the difference between wall material take off and material part take off of the same wall.the wall consist of 20mm render, 230mm brick and 30mm tile. Both give the same result.If we join a beam with the wall however, the wall material take off will give different result than the material part take off.The wall finishes in the material part schedule are correct, the ones in the wall matrial take off are off by 53%.
Please see attached file and "unjoin" the beam to the wall to see that both quantities are the same.Interestingly, the total volume of both schedules is almost identical, it is the subdivision that is completely off.
When setting up the material take off manually the material part take off is correct.I suspect I do something wrong. 53% off is not even usable when doing concept.
I run a department that cleans PDF architectural drawings in Illustrator and Photoshop for use in online documentation software. I am currently working on creating spreadsheets laying out "if plan is 1/8" = 1', scale at 'X' %", etc, as up until now it is simply done by eye, but we try to scale up or down all plans to roughly the same size. While trying to determine a scaling ratio to create these charts, I realized that when I imported the same PDF into AI, it resizes the image, where as when I import it into photoshop, it imports it at full size. For example, I took the same PDF and dropped it into AI, and it was 2108 x 2881, and when dropping into PS it was 8788 x 12007
How can I import a PDF into AI and PS and have them be the same dimensions?I saved a GIF file 5,000 pixels wide, and it imported 5,000 pixels wide into both programs, so it appears I am only having this issue when working with PDF files.
Any method for exporting an alignment as a shapefile in C3D 2011?
View 9 Replies View RelatedUsing GPS Pathfinder to export to shapefile to load into AutoCAD. I've done it before, but I messed up the Pathfinder software this time. Using Pathfinder version 4.20
Opened Pathfinder, went Utilities (top tool bar)...Export and the Export popup came up. Then accidently deleted "Sample ESRI shapefile" from the "Choose an Export Setup" drop down list. Clicked the New button at the bottom. Selected a new ESRI shapefile set up, clicked ok.
What do I enter in the Export Setup Properties tabs? (tabs are Position Filter, Coord. System, ESRI Shapefile, Data, Output, Attributes, Units) What were the values in the original "Sample ESRI shapefile?". I tried not entering anything...the points can be exported to a shapefile, the shapefile can be loaded into AutoCAD map but there is no coordinate system (even if coordinate systems is edited in AutoCAD) so the points are always shown at (0,0).
Also tried uninstalling Pathfinder on my computer and then using the original CD to reinstall. Still not showing Sample ESRI Shapefile after reinstalling. How does the CD not reinstall clean? Have turned the computer off and on between deleting and reinstalling.
Using Civil 3D 2013. I've exported my Civil 3D points to an SDF and then to a shapefile. I cant get the "Z" elevation to come with it. Northing and Easting is correct, only problem is that is holds a zero elevation. how I can get the elevations to show correctl in the shapefile?
View 9 Replies View Related I've created a mono, bitmapped image approx 400px square. Then saved the file.
If I go to 'get info' (I'm on an Apple Mac), it says the file size is 97k.
If I open the file in P'shop (CS5.5) and go to 'Image Size', it says the file is 19.2k.
A) I am using a 825 pixel x 1125 pixel, 300 dpi photo (poker card size) which shows in the 'resize window' a printed photo size of: 2.75 x 3.75 cm.
However when viewing the photo in painnet on the screen, the ruler on top, shows something totally different.
A#1) Is it correct, that the ruler displayed, needs to be ignored, as it's not actual cm or inches?
A#2) Is it correct, that the size of the photo will be the one shown in the resize window only?
(Though I have experienced a discrepancy when printing, too).
B ) On the above mentioned 825 x 1125 photo I need to place another photo.
The size of that photo is in pixels: 213 x 312 pixel, 28 dpi.
Now, when I place this smaller photo onto the poker card size,
it's displayed, as if you place a stamp onto an A4 sheet of paper,
despite of the poker size actually only being 0.75 cm wider and the height being only 0.29 cm larger on each size.
B#1) Why am I experiencing such a discrepancy?
B#2) Is this normal, as the computer screen displays it differently,
How to export Civil3D pipe network with Object Data as Shapefile.
Any code snippets?
I am transforming water system components from Autocad dwg files (created in Civil 3d 2013 I think) to a personal (or file) geodatabase in ArcGIS 10.1. I am not familair with using Civil 3d.
I would like to know if there is some way I can export (as ESRI shapefile) AECC alignment objects (waterlines) as lines/polylines and preserve associated data (flow direction and station label info) as field attributes associated with the lines/polylines. I am not sure if there is elevation data associated with the alignments, but would want to preserve that data too if it is available.
Currently working with water system asset inventory mapping and geodatabase design
using Autocad Map 3d 2014 on Windows 7
using ESRI ArcGIS 10.1 on Windows 7
using ArcGIS 10.2 on Windows 8.1
