AutoCAD Map 3D :: Export Contours To Shapefile?
Oct 18, 2011When exporting 3D contours, what property do you use to export the elevation to attribute data in the shapefile?
View 2 Replies
ADVERTISEMENT
AutoCAD Map 3D :: Export SDF To Shapefile?
Nov 4, 2011Is there a way of exporting an sdf to a shapefile in AutoCAD Map 3D 2010?
View 9 Replies View RelatedAutoCAD Map 3D :: Export Map Feature To Shapefile
Mar 15, 2013If found that sometimes I need to have shapefile ony with one type of attributes.
It's easy to do querry in data connect but somehow I didn't find a way to export querred objects to independede shapefile.
AutoCAD Map 3D :: Export Polygon To A Shapefile
Jul 22, 2013I have a series of polylines with a global width of 5m which I want to export to a polygon shapefile to represent in GIS. I realised if I create a shapefile of the polylines and then create a buffer of 2.5m on either side I can create my desired polygon. My question is how do I export this polygon to a shapefile. I have tried bulk copy but this just seems to revert the buffer back to a polyline shapefile .
View 4 Replies View RelatedAutoCAD Map 3D :: 2014 - Shapefile Export Did Not Succeeded
Oct 24, 2013Having the following problem when exporting shapefiles in Map2014 or Civil2014. Im able to import but when i go to export it gives me the following error... Export did not succeed.
I've tried the Providers.xml file replacement but that didn't worked.
AutoCAD Map 3D :: Massive Export Of DWG To Shapefile By Layer?
Aug 14, 2013Is there a way to do massive export of dwg file to shapefile by layer?
I have number of drawings that need to be converted to shapefile and I don't want to do export layer by layer.
AutoCad :: Export And Import Shapefile In 2012
Feb 3, 2013When I use the command "mkshape" I am getting shape file, but this file i am unable to attach in Arc GIS 9.3..When I export shape file in Arc GIS how to import it in Auto CAD 2012."How to export drawings to shapefile and how to import shape files to drawing file in AutoCad 2012."
View 0 Replies View RelatedAutoCAD Map 3D :: GPS Pathfinder Export To ESRI Shapefile To Load
Jun 16, 2011Using GPS Pathfinder to export to shapefile to load into AutoCAD. I've done it before, but I messed up the Pathfinder software this time. Using Pathfinder version 4.20
Opened Pathfinder, went Utilities (top tool bar)...Export and the Export popup came up. Then accidently deleted "Sample ESRI shapefile" from the "Choose an Export Setup" drop down list. Clicked the New button at the bottom. Selected a new ESRI shapefile set up, clicked ok.
What do I enter in the Export Setup Properties tabs? (tabs are Position Filter, Coord. System, ESRI Shapefile, Data, Output, Attributes, Units) What were the values in the original "Sample ESRI shapefile?". I tried not entering anything...the points can be exported to a shapefile, the shapefile can be loaded into AutoCAD map but there is no coordinate system (even if coordinate systems is edited in AutoCAD) so the points are always shown at (0,0).
Also tried uninstalling Pathfinder on my computer and then using the original CD to reinstall. Still not showing Sample ESRI Shapefile after reinstalling. How does the CD not reinstall clean? Have turned the computer off and on between deleting and reinstalling.
AutoCAD Civil 3D :: Export Pipe Network With Object Data To Shapefile (SHP)
Sep 24, 2012How to export Civil3D pipe network with Object Data as Shapefile.
Any code snippets?
AutoCAD Map 3D :: AECC Alignment Object Properties Export To ESRI Shapefile
Dec 5, 2013I am transforming water system components from Autocad dwg files (created in Civil 3d 2013 I think) to a personal (or file) geodatabase in ArcGIS 10.1. I am not familair with using Civil 3d.
I would like to know if there is some way I can export (as ESRI shapefile) AECC alignment objects (waterlines) as lines/polylines and preserve associated data (flow direction and station label info) as field attributes associated with the lines/polylines. I am not sure if there is elevation data associated with the alignments, but would want to preserve that data too if it is available.
Currently working with water system asset inventory mapping and geodatabase design
using Autocad Map 3d 2014 on Windows 7
using ESRI ArcGIS 10.1 on Windows 7
using ArcGIS 10.2 on Windows 8.1
Illustrator :: Export Image Trace From CS6 To ArcMap 10.0 And Then Convert It To Shapefile?
Mar 1, 2013Image Traces can be exported as files that are usable in ArcMap 10.0. I ultimately need a shapefile in ArcMap.
View 1 Replies View RelatedAutoCAD Civil 3D :: Export XML Contours Not The Same?
Nov 27, 2012i'm exporting a surface from 2013 to be used in 2010 for presentation. works great but the contour interval is not the same as the surface i'm exporting. working in 5/25 contours...xml import comes in with 2/10 contours. looked for a setting but can't seem to find.
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Export Contours With Multiple Surfaces
Sep 8, 2013where the contours of each surface are separated into different layers? Usually it just produces two layers for all of the contours, major and minor.
View 1 Replies View RelatedAutoCAD Civil 3D :: Extract And Export Surface Contours And Labels
May 4, 2011I want to extract contours with elevation labels from a C3D 2011 surface for use in another 2011 drawing without the surface, as polylines and labels. Is there a way to do this?
View 9 Replies View RelatedAutoCAD Civil 3D :: Export Contours From Surface Using Genio Exporter
Nov 5, 2013I need to output the contours my surface model to a genio for use in Mx. I have the Genio exporter tool installed but when i output the genio all that appears is the Boundary line without the contours, which when i think about it makes sense as the surface contours is more a display option rather than actual contours. Is there a way of exporting the contours via genio.
View 4 Replies View RelatedAutoCAD Civil 3D :: Composite Surface Of Existing Surveyed Contours As TIN Pasted Into Existing Aerial Contours
Nov 15, 2012Some background: We have a composite surface of existing surveyed contours as a TIN pasted into existing aerial contours that we received from a client. We used polylines to generate our proposed contours, and then generated a proposed surface from that. We've made a blank surface, pasted in the existing surface, and are trying to paste in our proposed surface... only the existing contours outside of the proposed suface no longer line up correctly once we do.
We've tried applying the method laid out here: [URL] ........ (and the link referenced in the bottom) but are still having trouble getting the surface to work. We've tried offsetting as little as 0.25' and as much as 5' with the feature line draped over the existing surface, but it seemed that the greater the offset, the greater the discrepancy.
Just to make sure we even tried that correctly - should the breaklines that we add be standard or non-destructive? (I've tried it both ways with little success either way, so I don't know if it matters much in this instance, but perhaps for future reference it would work.)
I've attached a screen shot of our surfaces. The pink and green lines are the proposed contours, the white dashed are the existing. The outer red line is offset 0.25'. As I've mentioned, we've tried offsetting various amounts with decreasing success.
AutoCAD Map 3D :: Shapefile Topography Lot Number
Feb 28, 2011I'm brand new with Autocad 3D 2011.
I have a plat map that I used topopgraphy to create polygons of all the lots. Each lot has a lot number created as text (not mtext or a block) on a layer that is separate from the layer with the polygons. I need to export the polygons as a shapefile and be able to access them in reference to their lot number. This information should be included with the .dbf file. I can export the lot polygons as a shapefile but the lot numbers are not included. I suspect that I need to do something with getting the centroid to include the lot number text (which I was not able to do successfully.) And then include that with the polygon/data export.
AutoCAD Map 3D :: Zoom To Extents Of Shapefile
Sep 19, 2013Civil3d 2012
If you attach a shapefile through "Connect to Data" and try to zoom to extents by right clicking on the shapefile under "Task Pane" it zooms to a different location. The shapefile and drawing PRJ is in LL84. It works in Civil3D2010 but not in 11 or 12. I have Service pack 3 installed. Why?
AutoCAD Map 3D :: Shapefile To 3d Polyline Conversion
Sep 4, 2013I have a shapfile of multipart line features (i.e. polylines) I draped them on a 3d surface in GRASS GIS and exported a shapefile. now how do i get that shapefile to display in 3D inside civil 3D through FDO connection?
second part: how do I import that shapefile as a 3D polyline into Civil3D to generate breaklines?
AutoCad :: Exporting Shapefile Or ESRI?
Feb 7, 2012I've got a drawing that shows the site boundary for a planning application, its just a polyline drawn round xref mapping. A client wants us to export this to a shapefile, or as ESRI format I've heard (its all a bit vague). I believe they want to have it as a Mapinfo layer.
The client has sent through some 'instructions' that are I've never even heard of ESRI format before.
AutoCAD Civil 3D :: Exporting 2D Drawing To Shapefile
Feb 8, 2013I have a question about exporting a 2d drawing to a Shapefile. I have checked out the Help file supplied with AutoCAD Civil #D 2013.
View 6 Replies View RelatedAutoCAD 2010 :: Importing ESRI Shapefile (shp)
Jan 3, 2012I'm new (again) to using AutoCAD and am a GIS user. I just wanted to know if there was a way to import an ESRI shapefile (.shp extension) into AutoCAD 2011. This is the only version I have and don't really have any extensions with it. Can I do this or do I need different software?
View 8 Replies View RelatedAutoCAD Map 3D :: Connect To Shapefile - Measure Discrepancy
Feb 8, 2013I used connect to data to connect to a shapefile of parcels in NAD83 TX-SF. When I measure a specific parcel with MAPDIST or MEASUREGEOM i get 140 feet but when I check the distance in ArcGIS I get 156'. The 156' is correct. It's not just that shapefile, the conversion is consistent with other imported data. The ratio is about 1.114
I'm new to AutoCAD MAP most of my experience is with ArcGIS?
AutoCAD Map 3D :: Snapping And Viewing Of Shapefile Features In Map
May 9, 2012I have several shapefiles that I have brought into a new autoCad drawing all with the same coordinate system. All display fine when zoomed out to the extents but when I zoom in the features disappear. The scaling is set to the default 0 to infinity onside of the styling so they should disappear like they are or like one would think if that was set to something else.
I also can not snap to these features while zoomed in either.
AutoCAD 2013 :: Map Shapefile Attributes Name Shortened?
May 3, 2013Whenever I Output a shapefile it shortens the name of my attributes. I am using the Map 3d Export, i selected my objects, then select Data tab and select my block, and click ok. Then when i go to load the shapefiles into the database it has shortend the name of my attributes.
View 6 Replies View RelatedAutoCAD Civil 3D :: 2011 - Converting Alignment To Shapefile
Feb 4, 2013Any method for exporting an alignment as a shapefile in C3D 2011?
View 9 Replies View RelatedAutoCAD Civil 3D :: Exporting Points To Shapefile With Z Elevation?
Apr 12, 2013Using Civil 3D 2013. I've exported my Civil 3D points to an SDF and then to a shapefile. I cant get the "Z" elevation to come with it. Northing and Easting is correct, only problem is that is holds a zero elevation. how I can get the elevations to show correctl in the shapefile?
View 9 Replies View RelatedAutoCAD Map 3D :: Shapefile Joined To ODBC Connected Table - Filter Not Working
Dec 11, 2013I have a Shapefile layer added to the map via FDO. I joined it to a SQL Server based table via ODBC. I can see all the data (shapefile & ODBC table) correctly in the attribute table, but when comes time to "Query to Filter Data...", only fields in the Shapefile are available and displayed in the Filter dialogue. I want to be able to Filter using fields in the joined. If I export that same Shapefile to an SDF and THEN try the same join and filter, all the fields from the SDF as well as the joined ODBC table are available in the filter dialogue.
View 8 Replies View RelatedAutoCAD Map 3D :: Contours From Points
Jun 29, 2013I have a few points within an area of 2m x 2m and I will like to create contour lines. At the moment I can only produce models with shade difference.
Thge contour command does not accept sub 1 metre accuracy (putting 0.1m does not work).
Is there something I can do?
AutoCAD Map 3D :: Contours From DEM Are Not Aligned?
Jul 23, 2013I create a contour layer from a DEM raster and everytime it comes out about 700' offset from the DEM.
View 8 Replies View RelatedAutoCad 3D :: Lofting Between Some Contours Is Not Possible?
Dec 5, 2011Im trying to make a 3d model of a site in AutoCAD and it seems lofting between some contours is impossible, this is driving me insane, first it told me there was a U and V derivative problem so i loft the surfaces that i could but now there is a gap where it refuses to loft and i cannot create a surface in that gap using network or blend or pach.
View 3 Replies View Related