I have a shapfile of multipart line features (i.e. polylines) I draped them on a 3d surface in GRASS GIS and exported a shapefile. now how do i get that shapefile to display in 3D inside civil 3D through FDO connection?
second part: how do I import that shapefile as a 3D polyline into Civil3D to generate breaklines?
Is there a way of exporting an sdf to a shapefile in AutoCAD Map 3D 2010?
View 9 Replies View RelatedI'm brand new with Autocad 3D 2011.
I have a plat map that I used topopgraphy to create polygons of all the lots. Each lot has a lot number created as text (not mtext or a block) on a layer that is separate from the layer with the polygons. I need to export the polygons as a shapefile and be able to access them in reference to their lot number. This information should be included with the .dbf file. I can export the lot polygons as a shapefile but the lot numbers are not included. I suspect that I need to do something with getting the centroid to include the lot number text (which I was not able to do successfully.) And then include that with the polygon/data export.
Civil3d 2012
If you attach a shapefile through "Connect to Data" and try to zoom to extents by right clicking on the shapefile under "Task Pane" it zooms to a different location. The shapefile and drawing PRJ is in LL84. It works in Civil3D2010 but not in 11 or 12. I have Service pack 3 installed. Why?
When exporting 3D contours, what property do you use to export the elevation to attribute data in the shapefile?
View 2 Replies View RelatedIf found that sometimes I need to have shapefile ony with one type of attributes.
It's easy to do querry in data connect but somehow I didn't find a way to export querred objects to independede shapefile.
I have a series of polylines with a global width of 5m which I want to export to a polygon shapefile to represent in GIS. I realised if I create a shapefile of the polylines and then create a buffer of 2.5m on either side I can create my desired polygon. My question is how do I export this polygon to a shapefile. I have tried bulk copy but this just seems to revert the buffer back to a polyline shapefile .
View 4 Replies View RelatedI've got a drawing that shows the site boundary for a planning application, its just a polyline drawn round xref mapping. A client wants us to export this to a shapefile, or as ESRI format I've heard (its all a bit vague). I believe they want to have it as a Mapinfo layer.
The client has sent through some 'instructions' that are I've never even heard of ESRI format before.
I have a question about exporting a 2d drawing to a Shapefile. I have checked out the Help file supplied with AutoCAD Civil #D 2013.
View 6 Replies View RelatedI'm new (again) to using AutoCAD and am a GIS user. I just wanted to know if there was a way to import an ESRI shapefile (.shp extension) into AutoCAD 2011. This is the only version I have and don't really have any extensions with it. Can I do this or do I need different software?
View 8 Replies View RelatedI used connect to data to connect to a shapefile of parcels in NAD83 TX-SF. When I measure a specific parcel with MAPDIST or MEASUREGEOM i get 140 feet but when I check the distance in ArcGIS I get 156'. The 156' is correct. It's not just that shapefile, the conversion is consistent with other imported data. The ratio is about 1.114
I'm new to AutoCAD MAP most of my experience is with ArcGIS?
I have several shapefiles that I have brought into a new autoCad drawing all with the same coordinate system. All display fine when zoomed out to the extents but when I zoom in the features disappear. The scaling is set to the default 0 to infinity onside of the styling so they should disappear like they are or like one would think if that was set to something else.
I also can not snap to these features while zoomed in either.
Having the following problem when exporting shapefiles in Map2014 or Civil2014. Im able to import but when i go to export it gives me the following error... Export did not succeed.
I've tried the Providers.xml file replacement but that didn't worked.
Is there a way to do massive export of dwg file to shapefile by layer?
I have number of drawings that need to be converted to shapefile and I don't want to do export layer by layer.
Whenever I Output a shapefile it shortens the name of my attributes. I am using the Map 3d Export, i selected my objects, then select Data tab and select my block, and click ok. Then when i go to load the shapefiles into the database it has shortend the name of my attributes.
View 6 Replies View RelatedWhen I use the command "mkshape" I am getting shape file, but this file i am unable to attach in Arc GIS 9.3..When I export shape file in Arc GIS how to import it in Auto CAD 2012."How to export drawings to shapefile and how to import shape files to drawing file in AutoCad 2012."
View 0 Replies View RelatedIs there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedI would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedDue to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
Any method for exporting an alignment as a shapefile in C3D 2011?
View 9 Replies View RelatedUsing GPS Pathfinder to export to shapefile to load into AutoCAD. I've done it before, but I messed up the Pathfinder software this time. Using Pathfinder version 4.20
Opened Pathfinder, went Utilities (top tool bar)...Export and the Export popup came up. Then accidently deleted "Sample ESRI shapefile" from the "Choose an Export Setup" drop down list. Clicked the New button at the bottom. Selected a new ESRI shapefile set up, clicked ok.
What do I enter in the Export Setup Properties tabs? (tabs are Position Filter, Coord. System, ESRI Shapefile, Data, Output, Attributes, Units) What were the values in the original "Sample ESRI shapefile?". I tried not entering anything...the points can be exported to a shapefile, the shapefile can be loaded into AutoCAD map but there is no coordinate system (even if coordinate systems is edited in AutoCAD) so the points are always shown at (0,0).
Also tried uninstalling Pathfinder on my computer and then using the original CD to reinstall. Still not showing Sample ESRI Shapefile after reinstalling. How does the CD not reinstall clean? Have turned the computer off and on between deleting and reinstalling.
Using Civil 3D 2013. I've exported my Civil 3D points to an SDF and then to a shapefile. I cant get the "Z" elevation to come with it. Northing and Easting is correct, only problem is that is holds a zero elevation. how I can get the elevations to show correctl in the shapefile?
View 9 Replies View RelatedI want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedIs there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
How to export Civil3D pipe network with Object Data as Shapefile.
Any code snippets?
I am transforming water system components from Autocad dwg files (created in Civil 3d 2013 I think) to a personal (or file) geodatabase in ArcGIS 10.1. I am not familair with using Civil 3d.
I would like to know if there is some way I can export (as ESRI shapefile) AECC alignment objects (waterlines) as lines/polylines and preserve associated data (flow direction and station label info) as field attributes associated with the lines/polylines. I am not sure if there is elevation data associated with the alignments, but would want to preserve that data too if it is available.
Currently working with water system asset inventory mapping and geodatabase design
using Autocad Map 3d 2014 on Windows 7
using ESRI ArcGIS 10.1 on Windows 7
using ArcGIS 10.2 on Windows 8.1
I have a Shapefile layer added to the map via FDO. I joined it to a SQL Server based table via ODBC. I can see all the data (shapefile & ODBC table) correctly in the attribute table, but when comes time to "Query to Filter Data...", only fields in the Shapefile are available and displayed in the Filter dialogue. I want to be able to Filter using fields in the joined. If I export that same Shapefile to an SDF and THEN try the same join and filter, all the fields from the SDF as well as the joined ODBC table are available in the filter dialogue.
View 8 Replies View RelatedAny way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedHow do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View Related
