AutoCAD Civil 3D :: Exporting 2D Drawing To Shapefile
Feb 8, 2013I have a question about exporting a 2d drawing to a Shapefile. I have checked out the Help file supplied with AutoCAD Civil #D 2013.
View 6 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Exporting Points To Shapefile With Z Elevation?
Apr 12, 2013Using Civil 3D 2013. I've exported my Civil 3D points to an SDF and then to a shapefile. I cant get the "Z" elevation to come with it. Northing and Easting is correct, only problem is that is holds a zero elevation. how I can get the elevations to show correctl in the shapefile?
View 9 Replies View RelatedAutoCad :: Exporting Shapefile Or ESRI?
Feb 7, 2012I've got a drawing that shows the site boundary for a planning application, its just a polyline drawn round xref mapping. A client wants us to export this to a shapefile, or as ESRI format I've heard (its all a bit vague). I believe they want to have it as a Mapinfo layer.
The client has sent through some 'instructions' that are I've never even heard of ESRI format before.
AutoCAD Civil 3D :: 2011 - Converting Alignment To Shapefile
Feb 4, 2013Any method for exporting an alignment as a shapefile in C3D 2011?
View 9 Replies View RelatedAutoCAD Civil 3D :: Export Pipe Network With Object Data To Shapefile (SHP)
Sep 24, 2012How to export Civil3D pipe network with Object Data as Shapefile.
Any code snippets?
AutoCAD 2013 :: Exporting Drawing To PDF
Nov 4, 2012I'm trying to export my drawing in paper layout to PDF but it is not exporting to the correct paper size. The final export is bigger than the regular printing paper. What should I do?
View 6 Replies View RelatedAutoCAD 2013 :: Exporting Sketch Up Drawing SKP To DWG
Sep 30, 2012I am currenly having an issue when I try to edit a drawing on inventor 13'. pretty much everything I imported from sketchup is a mesh, there are a few elements of solids because I added a few things on autoCAD eng. I would like to know if there is a way to make the meshes into soilds or if there is a work-around.
View 3 Replies View RelatedAutoCAD 2013 :: Exporting Text From A Drawing
Jun 21, 2012My company has just aquired Autocad2013 after using Autocad2000LT for years. My boss feels that there might be a way to export the text in a drawing as a table.
View 3 Replies View RelatedAutoCad :: Exporting Drawing Data To Excel
Jul 24, 2012Can you take text from a drawing and export it out to excel? My thoughts are room numbers, employee names, department names, etc.
I need an excel spreadsheet showing this information to then upload to my CAFM Application? Is there an alternative to obtaining a report from a drawing?
AutoCad 2D :: Exporting Saved UCS Views To Another Drawing?
Sep 26, 2011Is there a way of exporting saved UCS views to another drawing?
View 3 Replies View RelatedAutoCAD Map 3D :: Export SDF To Shapefile?
Nov 4, 2011Is there a way of exporting an sdf to a shapefile in AutoCAD Map 3D 2010?
View 9 Replies View RelatedAutoCad :: Best Format For Exporting Drawing For Working In Illustrator
Aug 12, 2012what's the best format for exporting an autocad drawing for working in illustrator?
Postscript level 1
Postscript level 2
Native Autocad Dwg or pdf?
AutoCAD Map 3D :: Shapefile Topography Lot Number
Feb 28, 2011I'm brand new with Autocad 3D 2011.
I have a plat map that I used topopgraphy to create polygons of all the lots. Each lot has a lot number created as text (not mtext or a block) on a layer that is separate from the layer with the polygons. I need to export the polygons as a shapefile and be able to access them in reference to their lot number. This information should be included with the .dbf file. I can export the lot polygons as a shapefile but the lot numbers are not included. I suspect that I need to do something with getting the centroid to include the lot number text (which I was not able to do successfully.) And then include that with the polygon/data export.
AutoCAD Map 3D :: Zoom To Extents Of Shapefile
Sep 19, 2013Civil3d 2012
If you attach a shapefile through "Connect to Data" and try to zoom to extents by right clicking on the shapefile under "Task Pane" it zooms to a different location. The shapefile and drawing PRJ is in LL84. It works in Civil3D2010 but not in 11 or 12. I have Service pack 3 installed. Why?
AutoCAD Map 3D :: Export Contours To Shapefile?
Oct 18, 2011When exporting 3D contours, what property do you use to export the elevation to attribute data in the shapefile?
View 2 Replies View RelatedAutoCAD Map 3D :: Shapefile To 3d Polyline Conversion
Sep 4, 2013I have a shapfile of multipart line features (i.e. polylines) I draped them on a 3d surface in GRASS GIS and exported a shapefile. now how do i get that shapefile to display in 3D inside civil 3D through FDO connection?
second part: how do I import that shapefile as a 3D polyline into Civil3D to generate breaklines?
AutoCAD Map 3D :: Export Map Feature To Shapefile
Mar 15, 2013If found that sometimes I need to have shapefile ony with one type of attributes.
It's easy to do querry in data connect but somehow I didn't find a way to export querred objects to independede shapefile.
AutoCAD Map 3D :: Export Polygon To A Shapefile
Jul 22, 2013I have a series of polylines with a global width of 5m which I want to export to a polygon shapefile to represent in GIS. I realised if I create a shapefile of the polylines and then create a buffer of 2.5m on either side I can create my desired polygon. My question is how do I export this polygon to a shapefile. I have tried bulk copy but this just seems to revert the buffer back to a polyline shapefile .
View 4 Replies View RelatedAutoCad :: Exporting Block Attributes To Create Drawing Index
Nov 12, 2012I am trying to find a way to create an index drawing without having to input much information in.
I would like to export the attributes from each drawing file in my (project folder) from the title-blocks (drawing numbers and descriptions) into excel and then be able to just data link that into my Index table in AutoCAD. I know i could put the info in excel and import it into my table in CAD but i am looking for something more Automatic, so that every time i need to create an index it will automatically extract the info from the drawing files title-blocks.
AutoCAD 2010 :: Importing ESRI Shapefile (shp)
Jan 3, 2012I'm new (again) to using AutoCAD and am a GIS user. I just wanted to know if there was a way to import an ESRI shapefile (.shp extension) into AutoCAD 2011. This is the only version I have and don't really have any extensions with it. Can I do this or do I need different software?
View 8 Replies View RelatedAutoCAD Map 3D :: Connect To Shapefile - Measure Discrepancy
Feb 8, 2013I used connect to data to connect to a shapefile of parcels in NAD83 TX-SF. When I measure a specific parcel with MAPDIST or MEASUREGEOM i get 140 feet but when I check the distance in ArcGIS I get 156'. The 156' is correct. It's not just that shapefile, the conversion is consistent with other imported data. The ratio is about 1.114
I'm new to AutoCAD MAP most of my experience is with ArcGIS?
AutoCAD Map 3D :: Snapping And Viewing Of Shapefile Features In Map
May 9, 2012I have several shapefiles that I have brought into a new autoCad drawing all with the same coordinate system. All display fine when zoomed out to the extents but when I zoom in the features disappear. The scaling is set to the default 0 to infinity onside of the styling so they should disappear like they are or like one would think if that was set to something else.
I also can not snap to these features while zoomed in either.
AutoCAD Map 3D :: 2014 - Shapefile Export Did Not Succeeded
Oct 24, 2013Having the following problem when exporting shapefiles in Map2014 or Civil2014. Im able to import but when i go to export it gives me the following error... Export did not succeed.
I've tried the Providers.xml file replacement but that didn't worked.
AutoCAD Map 3D :: Massive Export Of DWG To Shapefile By Layer?
Aug 14, 2013Is there a way to do massive export of dwg file to shapefile by layer?
I have number of drawings that need to be converted to shapefile and I don't want to do export layer by layer.
AutoCAD 2013 :: Map Shapefile Attributes Name Shortened?
May 3, 2013Whenever I Output a shapefile it shortens the name of my attributes. I am using the Map 3d Export, i selected my objects, then select Data tab and select my block, and click ok. Then when i go to load the shapefiles into the database it has shortend the name of my attributes.
View 6 Replies View RelatedAutoCad :: Export And Import Shapefile In 2012
Feb 3, 2013When I use the command "mkshape" I am getting shape file, but this file i am unable to attach in Arc GIS 9.3..When I export shape file in Arc GIS how to import it in Auto CAD 2012."How to export drawings to shapefile and how to import shape files to drawing file in AutoCad 2012."
View 0 Replies View RelatedAutoCAD Map 3D :: GPS Pathfinder Export To ESRI Shapefile To Load
Jun 16, 2011Using GPS Pathfinder to export to shapefile to load into AutoCAD. I've done it before, but I messed up the Pathfinder software this time. Using Pathfinder version 4.20
Opened Pathfinder, went Utilities (top tool bar)...Export and the Export popup came up. Then accidently deleted "Sample ESRI shapefile" from the "Choose an Export Setup" drop down list. Clicked the New button at the bottom. Selected a new ESRI shapefile set up, clicked ok.
What do I enter in the Export Setup Properties tabs? (tabs are Position Filter, Coord. System, ESRI Shapefile, Data, Output, Attributes, Units) What were the values in the original "Sample ESRI shapefile?". I tried not entering anything...the points can be exported to a shapefile, the shapefile can be loaded into AutoCAD map but there is no coordinate system (even if coordinate systems is edited in AutoCAD) so the points are always shown at (0,0).
Also tried uninstalling Pathfinder on my computer and then using the original CD to reinstall. Still not showing Sample ESRI Shapefile after reinstalling. How does the CD not reinstall clean? Have turned the computer off and on between deleting and reinstalling.
AutoCAD Map 3D :: AECC Alignment Object Properties Export To ESRI Shapefile
Dec 5, 2013I am transforming water system components from Autocad dwg files (created in Civil 3d 2013 I think) to a personal (or file) geodatabase in ArcGIS 10.1. I am not familair with using Civil 3d.
I would like to know if there is some way I can export (as ESRI shapefile) AECC alignment objects (waterlines) as lines/polylines and preserve associated data (flow direction and station label info) as field attributes associated with the lines/polylines. I am not sure if there is elevation data associated with the alignments, but would want to preserve that data too if it is available.
Currently working with water system asset inventory mapping and geodatabase design
using Autocad Map 3d 2014 on Windows 7
using ESRI ArcGIS 10.1 on Windows 7
using ArcGIS 10.2 on Windows 8.1
AutoCAD Map 3D :: Shapefile Joined To ODBC Connected Table - Filter Not Working
Dec 11, 2013I have a Shapefile layer added to the map via FDO. I joined it to a SQL Server based table via ODBC. I can see all the data (shapefile & ODBC table) correctly in the attribute table, but when comes time to "Query to Filter Data...", only fields in the Shapefile are available and displayed in the Filter dialogue. I want to be able to Filter using fields in the joined. If I export that same Shapefile to an SDF and THEN try the same join and filter, all the fields from the SDF as well as the joined ODBC table are available in the filter dialogue.
View 8 Replies View RelatedAutoCAD Civil 3D :: Exporting XML
Feb 22, 2012I had some problems with the xml's civ3d is exporting for other software. Are there option as to what goes in the xml that is exported? I need try just getting the points and breaklines in the xml from CIV3d. Am I missing something here?
View 4 Replies View RelatedAutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?
Nov 28, 2012Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View Related