When I use the command "mkshape" I am getting shape file, but this file i am unable to attach in Arc GIS 9.3..When I export shape file in Arc GIS how to import it in Auto CAD 2012."How to export drawings to shapefile and how to import shape files to drawing file in AutoCad 2012."
I have a series of polylines with a global width of 5m which I want to export to a polygon shapefile to represent in GIS. I realised if I create a shapefile of the polylines and then create a buffer of 2.5m on either side I can create my desired polygon. My question is how do I export this polygon to a shapefile. I have tried bulk copy but this just seems to revert the buffer back to a polyline shapefile .
Having the following problem when exporting shapefiles in Map2014 or Civil2014. Im able to import but when i go to export it gives me the following error... Export did not succeed.
I've tried the Providers.xml file replacement but that didn't worked.
Using GPS Pathfinder to export to shapefile to load into AutoCAD. I've done it before, but I messed up the Pathfinder software this time. Using Pathfinder version 4.20
Opened Pathfinder, went Utilities (top tool bar)...Export and the Export popup came up. Then accidently deleted "Sample ESRI shapefile" from the "Choose an Export Setup" drop down list. Clicked the New button at the bottom. Selected a new ESRI shapefile set up, clicked ok.
What do I enter in the Export Setup Properties tabs? (tabs are Position Filter, Coord. System, ESRI Shapefile, Data, Output, Attributes, Units) What were the values in the original "Sample ESRI shapefile?". I tried not entering anything...the points can be exported to a shapefile, the shapefile can be loaded into AutoCAD map but there is no coordinate system (even if coordinate systems is edited in AutoCAD) so the points are always shown at (0,0).
Also tried uninstalling Pathfinder on my computer and then using the original CD to reinstall. Still not showing Sample ESRI Shapefile after reinstalling. How does the CD not reinstall clean? Have turned the computer off and on between deleting and reinstalling.
as a casual user of maya, i regularly import .iges files from other 3D modelling programs. in past versions (specifically maya 2011), the .iges import/export bundle was located under the plug-in manager; however, i cannot locate this in maya 2012.
I am transforming water system components from Autocad dwg files (created in Civil 3d 2013 I think) to a personal (or file) geodatabase in ArcGIS 10.1. I am not familair with using Civil 3d.
I would like to know if there is some way I can export (as ESRI shapefile) AECC alignment objects (waterlines) as lines/polylines and preserve associated data (flow direction and station label info) as field attributes associated with the lines/polylines. I am not sure if there is elevation data associated with the alignments, but would want to preserve that data too if it is available.
Currently working with water system asset inventory mapping and geodatabase design using Autocad Map 3d 2014 on Windows 7 using ESRI ArcGIS 10.1 on Windows 7 using ArcGIS 10.2 on Windows 8.1
I'm having an issue with exporting an Inventor 2012 .idw to AutoCAD DWG.I am trying to export a multi-sheet drawing to AutoCAD 2007 using the Model Space - Full Scale option.
IT seems like no matter what I try, it will only export the geometry from the first sheet. It creates the other 2 .dwg files (Sheet 2 and 3) but they are empty. The drawing set is comprised of a large plan view on sheet 1 and then a bunch of section views, originally cut on sheet 1 and then moved to the other sheets.
I tried using the other options "Sheet Scale - Model Space" which left me with some odd scale factor on the section views (completely different from the scale on the drawing) so, I can't use that.And "Base View Scale - Model Space" or "Layout" give me the same result as the 1:1 scale option... all 3 files, but 2 and 3 are empty.I tried .dxf and other AutoCAD versions with no change.
I'm using Ineventor 2012 to export files ive made to cut them out on a CNC i recently bought. Ive been having problems with the CAM software im suing to genrate toolpaths (MeshCAM) making the part smaller than it actually is, so i made a 1"x1"x1" cude and imported it to MeshCAM, it imported the demensions 2.54x2.54x2.54 Why is invortor exporting the stl in metric not english units?
I am trying to import a ProE created STP or STEP file of a solid model into 2012. STP does not seem to be an option under format types. AutoCAD Mechanical 2012 seems to import the file just fine and it looks and act like a solid. I saved the file out in dwg format. When I try to import the dwg file into Inventor or just open it, a "styles conflict" dialog box comes up even though the dwg file being imported and the ipt file being used are the standard versions that come with the programs. If I click OK an idw file opens displaying a blank sheet. Then Inventor acts like it is done with the task.
I never saw it prior to installing SP2 on 2012... (currently downloading SP2.1 to see if it fixes the issue...)
I have two viewports on the same sheet, one at 1"=30', and one at 1"=100'. Cogo Point symbols/labels will print correctly on one viewport, but not on the other. It seems to be related to whichever one I went into last. If I go into the main viewport at 1"=30', then the Cogo Point labels/symbols in the 1"=100' viewport turn very tiny when issuing "Export to Autocad 2010". If I go into the 1"=100' viewport last, then the Cogo Point labels/symbols in the other viewport blow up into huge gigantic things.
I've NEVER seen this behavior before. It's getting incredibly frustrating, since our client requires a plain AutoCAD 2010 drawing, and the Export feature is flat-out not working anymore. And if I try exploding Cogo Points prior to exporting, then they disappear from the Point Table.
I'm using Map 3D 2012 with Oracle 11g. I created an enterprise project with an industry model with water and wastewater modules. After this i created my feature classes and defined the utility model linking the geometry feature class to the attribute ones (ex: WA_POINT to WA_ARMATURE, WA_VALVE, WA_HYDRANT etc.).
At this moment i have to import a large amount of data from *.shp or *.sdf files, but theese files contain geometric and attribute data together.
How can i import the geometry from the shp or sdf file to the geometry feature class (ex: WA_POINT) and the attributes to the attribute feature class (ex: WA_VALVE), while creating the reference between the geometry and attribute feature classes?
I tried bulk-copying the geometry, but it doesn't create the coresponding attribute feature.
I am trying to export step files from Inventor 2012 into Surfcam. Any files that were created in Inventor translate over as solids. Files that I have imported from step files, recognized features, modified and exported again come into Surfcam as Nurb surfaces. I also tried using Inventor 2013 with the same results.
I've never experienced this problem with earlier versions of Inventor.
I have repeatedly attempted to export a simple drawing as a PDF and it doesn't take. I get an error message that the plot failed because there is nothing to plot (paraphrased).
Does export as a PDF not work or not in the Student version or?
We just upgraded to AutoCAD 2012 Architectural suite, With previous versions of AutoCAD we would be able to import groups using the customize pallets dialogue and Right click to import or export palette groups. These options seem to be missing.
How to lisp the function, where I'm trying to ultimately go with this anyway.
we have Inventor prof 2012 lisc copy ,now we recd 2013 upgrade copy , as per discusswith local service provider of Autodesk need to uninstall whole 2012 and reload fresh 2013. i copied contenet center folder on other location and reload fresh Inventor 2013.when i installed it it is obserbed that content center libraries don't have standards which contents in Inventor 2012. To open our old projects we need this standards, the procedure to import this content center libraries from 2012 to 2013.
I have a plat map that I used topopgraphy to create polygons of all the lots. Each lot has a lot number created as text (not mtext or a block) on a layer that is separate from the layer with the polygons. I need to export the polygons as a shapefile and be able to access them in reference to their lot number. This information should be included with the .dbf file. I can export the lot polygons as a shapefile but the lot numbers are not included. I suspect that I need to do something with getting the centroid to include the lot number text (which I was not able to do successfully.) And then include that with the polygon/data export.
If you attach a shapefile through "Connect to Data" and try to zoom to extents by right clicking on the shapefile under "Task Pane" it zooms to a different location. The shapefile and drawing PRJ is in LL84. It works in Civil3D2010 but not in 11 or 12. I have Service pack 3 installed. Why?
I have a shapfile of multipart line features (i.e. polylines) I draped them on a 3d surface in GRASS GIS and exported a shapefile. now how do i get that shapefile to display in 3D inside civil 3D through FDO connection?
second part: how do I import that shapefile as a 3D polyline into Civil3D to generate breaklines?
I've got a drawing that shows the site boundary for a planning application, its just a polyline drawn round xref mapping. A client wants us to export this to a shapefile, or as ESRI format I've heard (its all a bit vague). I believe they want to have it as a Mapinfo layer.
The client has sent through some 'instructions' that are I've never even heard of ESRI format before.