AutoCAD Map 3D :: Industry Models Running In Oracle XE
Apr 3, 2012
setting up Industry Model using Oracle 10g and 11g XE edition. I cant make it working, trouble starts when trying to create MAP 3d System User "MAPSYS" in Industry Model Setup, during user creation(about 68%) error popups" Could not create user MAPSYS"XE: Unable to deploy java package. Does XE version is suitable for Industry Models. Direct connection to Oracle 10g or 11G XE with MAP 3d working for me perfectly.
System I have is: WIN 7 Enterprise( 64 bit), database is Oracle 10g and 11g XE(32bit), client is Oracle 11g R2(administrator),all autodesk software is 2013 versions(64 bit). I tried it also with 2012 software but same result.
View 4 Replies
ADVERTISEMENT
Jun 14, 2013
ORacle spatial connected via FDO.
Oracle Table uses a user defined SRS.
Drawing entities (CAD) in DWG file.
command: mapexportfdo
If no CS is assigned in Map 3D, the export of the autocad entities works ok, the result geometries are written with the correct (table/metadata) SRID.
If a CS in MAP3D is assigned (for example as a result when using a WMS from a public server), the export fails.
It seems that MAP3D is trying to "translate" the CR to SRID somehow and it fails if these are different. As this is a "plain CAD" to GIS export, I expect MAP3D to behave like:
Either it just works as in the first step (write geometries) and pick the SRID from the metadata, without applying any transformation.
Or it applies a transformation if feasible ONLY when I the user checks the thick box: Convert Coordinate to (in the options tab on the Export dialog box.
In my case I do not want to transform, I just need the geomes being exported into the target table. So far I have only managed to do so when both drawing cr and oracle SRID are "MAP3D technically equal" (based on a similar EPSG code)
Specifically, because MAP3D does not recognize the user defined SRID in ORacle, obviously it is up to the user to know what to do with the data.
NOTE1: "export fails" is the only message as a user I get from the software, not knowing what is going on. I had to drill down this issue by trial and error, great error messaging (or better refusing message).
NOTE2: Export via another file format is NO option! I need a direct export (as it always worked, also when creating features from geometry). This time I need to exportway.
View 5 Replies
View Related
Oct 6, 2011
We are looking for a workflow example of developing casting models into machining models.
Typically our castings are made from different materials (Fig-1) and then machining (Fig-2) are created from these castings.
Is creating the casting as an iPart (with different materials) and then deriving the machining from the casting the proper method?
Doing it this way seems to force us into making a machining for each casting material instead of just one machining that is an iPart. How should this be set-up for BOM purposes and for use with Vault (Base Version)?
View 3 Replies
View Related
Nov 30, 2011
I have a new requirement from company to save a static drawing's dimensions' data into DB table. We have hundreds of drawings. DBConnect connects with oracle using ODBC. But how it is possible that we draw a drawing and its attributes are saved in DB.
View 3 Replies
View Related
Aug 29, 2011
Is this possible, create a .Net 3.5 Dll(A.dll), reference to Oracle 11g 32 bit client Oracle.DataAccess.dll. this dll will be used in another dll(B.dll), which load in AutoCAD 64 bit application. 32 bit version of AutoCAD is not allowed to install on Windows 7 64 bit. Right now I set my B.dll as 'Any CPU', and A.dll as 'Any CPU' as well. Do I have to use 64 bit oracle client in my A.dll?
View 1 Replies
View Related
Jun 22, 2012
I am working on an application which uses an oracle database as backend. The application uses a login dialog in void IExtensionApplication.Initialize()
so my application knows the credentials for the oracle database. I use a drawing-template which has a database link in it. This points to a UDL-file in 'Data Links'. If i add the Credentials to this file and set the Parameter Persist Security Info=True the Credentials are ignored. So i thought i can avoid the additional loginprocesses if I add the following
var acadApp = (Autodesk.AutoCAD.Interop.AcadApplication)Autodesk.AutoCAD.ApplicationServices.Application.AcadApplication;dynamic cao Connect = acadApp.GetInterfaceObject("CAO.DBConnect.16");cao Connect.Connect("myconnection.UDL", "username", "password", false);
If i don't execute the code above i need two logins for the new drawing. After I added the code to my application I still need one oft this.
View 1 Replies
View Related
May 31, 2011
I have just installed Map3d 2012 on a new windows 7 machine and connect to data using oracle! I have some .layer files that are stored on my server which worked perfectly in 2011! The problem I have now is when I use Load layer from the task pane I receive an message that reads..
Failed to open FDO connection
ORA-01005: Null password given: Logon denied
I can log in to my oracle database which gets rid of the error but no data is bought in! Also if I try to connect with query (polygon region on Map) from data connect (polygon region on Map) no data shown, just a red polygon where the data should appear!!
View 8 Replies
View Related
Aug 1, 2012
I have created a template file but whenever I open and display data in AutoCAD Map 3D 2012 it does not apply to the opened data from Oracle 10g. Infact, it change every time I open the data from database!
Using the symbol in AutoDesk Map 3D 2012. Also note that my database is Oracle 10g.
View 4 Replies
View Related
Jan 5, 2011
I have been tasked with finding a way to link data from Oracle and SQL databases with CAD files of rooms in certain buildings. My goal is to be able to select an arbitrary room within a building and be able to access certain information. I don't actually have access to the databases yet, but I would like to know how to do this when I do. My data consists of "human" data such as: name, email, position, sex, etc; as wells as "physical" data such as: square footage of the room, who uses it, computer serial numbers, or what department is in charge of it. Using this data we will cross reference the tables to determine what our needs are.
My AutoCAD skills are good but I've never come across anything like this in the class room. Most of my knowledge is Civil based and more focused on design.
View 9 Replies
View Related
Aug 1, 2012
Import Data into the Industry Model,
I am supposed to go to the insert tab and run convert to industry modle.
However it does not exist in this tab, I could not get the help file to show be where I could find this command.
Also where is the dataset for this module. I followed the link from the help file to [URL].... but could not see any data set for this module
View 4 Replies
View Related
May 31, 2013
I recently installed Autocad Map 3d 2014, 64 bits, on a windows 7 machine. I set up an enterprise model in a SQL server 2008 R2 database, created a custom industry model with one feature class, converted a SHP to my custom industry model. All 80 features were converted.
The problem is when I'm trying to call Generate Graphic function. Autocad Map crashes and I get this error in the error log:
An item with the same key has already been added.
View 2 Replies
View Related
Dec 30, 2012
I used the industry model template for the North American electric grid, thinking it would link the data I saw on the tutorials. I am pretty sure that I need to find industry models for the electric grid now that I can't seem to get the conductors to show up on my map. Is that right? where I can find an industry model of the electric grid around Lake Michigan?
If I cannot find an industry model (a database?), can I just switch workspace to "Planning and Analysis" and import the models I have (images, West side of lake only) and attempt to manipulate those (while keeping everything I have)?
I have lost much work repeatedly upon saving. Do I always have to "check in" my data before saving?
Is there an easier way to match-up roster images (that aren't GEOTiffs) to shape files (that have a coordinate system) rather than using "scale," "rotate" and "move"? I didn't have luck with the "pick" option and monkeying around with manual manipulation didn't match up well. Perhaps there is a way to manipulate points on an image?
View 5 Replies
View Related
Sep 25, 2013
I am getting error 'No industry model feature has been selected' while trying to see the attribute of feature.
The below are steps followed
1. I have created materlized view
2. And created view
3. created view feature class
4. Opened the project in Map3D
5. generated the graphics
6. Selected the feature
7. click on Attribute information button.
8. Getting message "No industry model feature has been selected".
View 1 Replies
View Related
May 14, 2012
What is the industry standard regarding horizontal vs. vertical scale? More specifically, should the exaggerated vertical scale be proportional to the horizontal scale?
For example, if I have a drawing that has a horizontal scale of 1" = 100', should my vertical scale be 1" = 10'? Or if my horizontal scale is 1" = 30', should my vertical scale be 1" = 3'? Obviously, we have the ability to make the vertical scale anything we want but what is there a recognized industry standard that correlates the horizontal scale to the vertical scale?
View 1 Replies
View Related
Aug 12, 2013
Using Storm and Sanitary Analysis from a wastewater industry model? I have been looking into that but have run into a problem regarding units (using metric units). When importing data from wastewater industry model into SSA it assumes that pipe dimensions are given in meters and subbasins area are given in ha. My data is in mm and sqr.m.
Can I define what units to use when importing this data??
If I import GIS data (shp files) I can define what units the data is in.
Using 2013 versions of Map and SSA.
View 5 Replies
View Related
May 27, 2013
When connecting to an Industry Model one can use the Convert to Industry Model dialog.Here you can select the source you want to map. This can be an FDO connection, a file (SDF, SSQLite, DWG).If you choose DWG, 4 options can be used as input/source:
AutoCAD Entities,
Layers
Object data
Block Names
However, the MAP 3D feature classes (from Classification) are not listed here, nor can I find (Hoping I am overlooking it) a way of converting mapping them to the IM. Seems the only option is to redo the classification "defintion" effort again.
If this is the case, I am getting more the impression that Map3D is becomming a bunch of tools rather then a consistent framework supporting a step by step path from CAD to GIS to Industry Model type it is being marketed.
View 2 Replies
View Related
Dec 12, 2012
I need to connect a rapport with others(print on fabric for textile industry). It looks like a mosaic, however the pieces doesn't connect side by side at the same height, but side by side sometimes higher, sometimes lower
.
The thing is: when I try put then together the limit of the layers create an edge that prevents connection.I'm sending some images to try to make this clear: 1- all layers together with the thin line between the 2- closer to junction 3- closer 3200% to see what really happens.
When the image is magnified 3200% we can see clearly that this "crack" is actually the edge of the layer that has become a bit clearer, then edge with edge, it creates an impression that there is a line in the overall picture. And I can not just cover it because each layer will be duplicated automatically by a machine rapport. So is there any way to make the edge of the layer does not check clearing?
View 9 Replies
View Related
May 5, 2011
Is it possible to use 3d max objects in autocad? I have objects but I dont know If i can import them. Im working in an interior right now and I only use 3d models in autocad. Or can any of you give me a site where I can download more detailed models that give more realistic renders?
View 2 Replies
View Related
Jun 15, 2012
If I create a 3D model in AutoCAD 2013 using, say, 12 components; am I able to list the components in a report including any attributes that I attach to each component? Similar to Revit BIM.
View 2 Replies
View Related
Sep 10, 2013
If i have two viewports in 1 layout: Is it possible to call different models (from different files) in it?
Lets say... ViewportA has model of drawing A. ViewportB has model of drawing B. But Both viewports are in the same layout.
I want to avoid using clipxref when inserting legends.
View 9 Replies
View Related
Nov 1, 2011
what's everyone using for cotter pin models:
1. content center pre-bent model
or
2. the one from CBLISS that’s straight, but looks more accurate
View 1 Replies
View Related
May 14, 2013
I have a fairly complex solid model built in Autocad 2013. I would like to dimension it now. I have various individual parts plus sub assemblies and weldments etc. What are best practices for doing this in an organized way? Should I copy various parts over to other drawings and dimension them separately? It seems odd to pile everything onto the one model. I know that Autocad is not Inventor (which I am somewhat familiar with), but does it have some similar tools for doing individual part drawings to keep things manageable?
View 4 Replies
View Related
Jun 6, 2012
How to compare two 3d models in Inventor or any of autodesk modules to see the changes?
View 7 Replies
View Related
Jun 13, 2011
Is it wise to build blocks to use in 3d models?
I am working on an apartment building. In 2d I created a block of a typical unit and copied and rotated it around as needed. Can I use the same principle in 3d? Can I attach materials inside the block editor? (I built the whole thing as a sketch model with no materials, and now want to make it pretty!)
I'm working in ACAD2010
View 9 Replies
View Related
Jul 18, 2012
I am trying to simply print my model as it appears on the screen, but when I go to plot it shows my preview either in wireframe or as a shadow. I have tried all of the different view types (realistic, conceptual, etc.) but none of them print it as shown on the screen. Is there something I can do to plot it as is?
View 1 Replies
View Related
Oct 16, 2012
Some of the models that I convert into NWDs (via Naviswork's automation API ) may contain left over artifacts that the designer left, often in outer space, which causes the constructed NWD (and thus any other NWD that has appended the erroneous one) to have very large extents.
What would be an approach in detecting such artifacts in the DWG via the API? I'd like to construct a .NET app that would run to scan the models for such space junk before being processed by Navisworks?
View 4 Replies
View Related
Nov 19, 2012
We have a user that has a mysterious red cicle symbol with a slash through it showing up on a draft in a model. I've attached a screen capture of it. The drawing isn't showing any other errors but this symbol won't go away.
View 7 Replies
View Related
Jul 30, 2012
I am lookng for a way to allow multiple material selections for a drawing/model
We have components that avaialable in both 304 and 316. We have seperated stock codes for each of the selections what I would like to do is to come up with a way that I don't need multiple models of these features. The deisgns are virtually the same except for the material change.
In previous cad systems I used a tabled system in the model that would allow you to vary paramters such as Iproperties or even dimensions in one model.
This elimated duplication of work includeing double maintenance for the models?
View 4 Replies
View Related
Mar 11, 2013
I have two different models that I want to place on top of one another in a drawing. One is a before machining and the other is after. I would like to be able to show one model with a different line type on the drawing and have it superimposed on the other drawing so that somone can see them both and the difference between them. I looked at the Positional Representations feature and it does not seem to do this.
I am using Inventor 2013.
View 9 Replies
View Related
May 17, 2013
I have the task of creating elevation views of a site. These views require that the model be clipped along a section line to crop the forground so it doesn't obstruct the view of the site.
I've experimented with the section plane tools in the 3D modeling workspace but I can't get a section view. I suspect it is because they don't work with C3D surface objects. Any workflow for this task? Ultimately I need to generate hard copies of the views for the architect to use for his landscape plans.
View 9 Replies
View Related
Oct 6, 2004
i am looking for a resource for models for standard parts....in this particular case a micrometer or something that i can through in an assembly to give a sense of scale.
View 3 Replies
View Related
