Paint Shop Pro :: Preview Of Text In Movie In Blank / Black

Aug 25, 2011

i found PSP3 to be WAY over my head, and uninstalled it,, only now, using windows movie maker ][5.1] i find the "preview" of text in video is blank. is there some thing about PSP that would have caused this? i reinstalled PSP and it and windows movie maker worked ok, then i removed psp again and the problem has returned. the preview of text in movie in blank/black..in the windows movie maker. the text DOES go on,,

View 3 Replies


ADVERTISEMENT

Paint Shop Pro :: Not Printing All Text Shown On Screen And In Preview

Mar 9, 2012

I am new to Corel PaintShop Pro X4, and am attempting to enter text into a template I found online. I was successful in entering the text, and when I try to print, the print preview shows a template full of text. However, when the page prints, only some of the text is there! The text that prints doesn't even seem to correspond with the layers. I tried to save the file as another type of image to print it (all text shows then with no problem), but it is not a very sharp image. I have searched the manual, but am not finding an answer. This is time sensitive

View 2 Replies View Related

Paint Shop Pro :: Update Dialog Box Blank?

Dec 9, 2013

I have Corel PaintShop Pro X6 v 16.1.0.48, both 64 and 32 bit versions installed. When I click the check for updates in the help menu, I get 2 blank dialog boxes. I cancel out of the last one by clicking the red X in the upper right hand corner and I get a dialog box that asks me if I want to cancel.

View 1 Replies View Related

Paint Shop Pro :: Project Creator BLANK Card Template

Jun 1, 2011

Cannot find any additional templates for project creator. Quite a limited selection. Would prefer a completely blank page (Cover & inside) so that I can create an image in it's entirety elsewhere & load it as an image. Am trying to find the template in the project creator folder so that I can edit it & make it completely blank. If no one knows where I can download one that is already blank, how to edit the file that the existing templates are using?

View 1 Replies View Related

Paint Shop Pro :: Cropping Tools - Blank Icons On Floating Tool Bar

Jun 14, 2012

For some reason when I use the cropping tool the floating tool bar has blank icons on it. Sometimes there may be lines in them like they tried to load but most of the time they are just completely white.

They still work and everything but you have to run your mouse over them and wait for the box to pop-up thats says what it is to see which one you need.

View 2 Replies View Related

Paint Shop Pro :: Full Screen Preview

Jan 10, 2012

I just haven't found the setting, but I can't seem to make the cursor disappear during full screen preview in PSP x4! Is it something I'm not selecting?

I have searched to the ends of the internet for an answer, but have come up with nothing, however I noticed that there was an ESC key bug with full screen preview in PSP x3, and having a visible cursor would allow one to exit full screen without having to press a key. Could this be why the cursor is now visible? Now that I think about it, I've always been able to exit with either the ESC key or a mouse click. Still, this is something I've never seen before in any version of PSP.

View 2 Replies View Related

Paint Shop Pro :: Manage Full Preview Color

Dec 28, 2011

Noticed this when going through my photos tonight. When using the full screen preview in the Manage workspace, a photo will become more magenta after every pass.

Duplicate this by:
1. Double click on an image in the manage workspace to bring up the full screen preview. Take note of the colors.
2. Press the right arrow on your keyboard to advance to the next image.
3. Press the left arrow on the keyboard to return to the original image. Examine the colors...for me it is slightly more magenta. To make this change more obvious switch back and forth between the original and 2nd image. For me, the images become extremely magenta.

I'll include 2 images of one photo....the only difference being that the "magenta" one has gone through the process above 6 times.

[URL]..........

View 8 Replies View Related

Paint Shop Pro :: Still Can't Open Before And After Views In Preview Pane

Sep 29, 2012

I have read several requests from others, as well as the very confusing "answers" to them. Corel's manual shows photos of before/after views in several examples, but there is no info on how to bring them up. Some of the answers here say things like "Use the window" don't know where that is "Simulate a before/after" - Are you kidding? "Click on filters" - doesn't work Use Adjust menu.

WHY does Corel show all those samples but not have a way to do it?On page 130 of the PaintShop Pro X4 manual, there is a discussion and a picture of a Before/After situation, but nowhere is there any info on how to bring it up.

View 3 Replies View Related

Paint Shop Pro :: Manage Tab Preview Quit Working

Jun 7, 2013

PSPX5 on a Win7 machine.I've been using this program a long time. Been using this setup for almost a year. Suddenly, the "preview" pane of the the "manage" tab has just quit working. It's whited out. I click on a thumbnail and the image info shows on the side pane, but the main frame just remains white. I've tried restarting the machine, to no avail. I can try uninstalling and reinstalling, but would rather not.

View 5 Replies View Related

Paint Shop Pro :: Manage Tab Preview Window Incorrectly Displaying

May 27, 2013

I am using Paint Shop Pro X5 Ultimate.The Preview Window of the Manage Tab seemed to be displaying photos oddly - the photo wasn't filling the preview window (it was leaving an area around the bottom and right-hand side of the photo). At first I thought it was just the zoom setting, so I zoomed in. However, I have now used several features of the software that seem to show that the Preview Window (only on the Manage Tab) is incorrectly displaying the preview.

The problem became further evident when I used the Find People feature of Paint Shop Pro to locate the faces and tag several people, however the position of the tags are as if the Preview Window is filled by the photo. I have attached a screenshot that shows that the tag for the person in the bottom right-hand corner of the photo has her tag positioned off the photo (outside of the border of the photo) to the bottom and right of the photo even though it was automatically placed by the software. The position of the tags for the people in the photo are all offset slightly to the right and down and would be correct only if the photo was displaying correctly in the Preview Window.

I have tested uploading the photos to Facebook and the tags appear correctly once on Facebook. If I manually tag the faces as they appear on the Preview Window, the tags are incorrectly placed once the photo has been uploaded to Facebook (they appear up and to the left of where the face is positioned in the photo.

I have tried resetting the preferences and turning off some display features of Microsoft Windows, but I have seen to changes in the Preview Window.

Properties of your source files (format, file size, where did you get it?) The example photo was taken in .jpg format using a Nikon D3100 and 18-200mm Nikon DX lens, though this affects my entire photo collection taken on several different cameras and in several different formats (including RAW).

What devices are involved and their mode of connection? The files were transferred directly from the camera to the computer using a USB cable. Project Properties:I was using the Manage tab to sort photos and tag people using the Find People feature and also tried manually tagging faces.

View 2 Replies View Related

Paint Shop Pro :: X6 - Picture On Preview Area Does Not Fill The Frame

Oct 26, 2013

PSP X6. In the Manage workspace, in preview mode, the picture on the preview area does not fill the frame but about 3/4 of it leaving the right and bottom ends empty. It is the same with the 64b and 32b vertions.

View 4 Replies View Related

Paint Shop Pro :: Cannot See Preview Images In Manage / Adjust Or Edit Modes

Feb 5, 2013

I purchased PSP 5 and uninstalled PSP 4. After installation, I am unable to see any image previews in manage, adjust or edit mode. I have installed the service pack updates with no change in this absent function. Neither the main window nor the organizer palette will display any jpg image previews. I CAN go manually to a specific file and open the image and edit it at will, but I cannot see any previews of any images in the main or organizer palette. how to get the program to display image previews. I never had this problem before in any of the previous PSP versions. I have also uninstalled, rebooted and reinstalled the program to no avail.

View 2 Replies View Related

Paint Shop Pro :: In Print Preview Only Tiny Parts Of Picture Is Visible

Jun 25, 2011

when i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.

View 1 Replies View Related

Paint Shop Pro :: Printing Out Black And White Photo

Jan 24, 2012

I'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.

JPG
102 KB
773x1000 pixels original size
72 dpi 8 bit depth
Resolution 2
EXIF 0220
Off the internet
Canon PM 620 printer
Kodak paper
No error codes
PSP 13.00

View 2 Replies View Related

Paint Shop Pro :: X4 - Filling Color To Black And White Map

May 14, 2012

I'm having trouble changing a black and white map to filling it with a color. In the materials palette the foreground and background remain in the greys/blacks and will not accept the change to a color.

View 1 Replies View Related

Paint Shop Pro :: Can Black Background Color Be Changed In X4?

Dec 14, 2011

Corel SP1. I now have toolbars I can see clearly, but the black background makes it impossible to tell if an image has a thin black perimeter border. Last release I could drag the window to size it larger than the image and it was easy to see. The attachment shows the trouble and I can't find where or how to change just the background color of the work surface without changing the color of the workspace that now works best for me.

View 1 Replies View Related

Paint Shop Pro :: X2 Ultimate / Black Lines On New Image?

Oct 26, 2011

Win 7 64 bit PSPX2 Ultimate (12.50)

If I open a new image Raster background (white) RGB-8bit/channel and put the size in inches centimetres or millimetres I get a black 1px line horizontal and vertical on the image. I either have to paint over it or open the image using pixels as the sizing.

Example: New image 1black spot saved.

[URL]

I have only just found out how it occurs. It also is the same if I install PSP on Laptop (win7 64 bit)I make animations and can use upto 50 images replicating from the 1st image so if I forget to paint out the lines on number 1 image (as I did last week) and then put them through an animator and then scream when I see the black lines on the finshed animation. At least I now know to always use pixels as the size of the images.

Of course now I know I will try and use pixels when opening a new image (but would sooner use the other measurements )

View 4 Replies View Related

Paint Shop Pro :: Black Blocks On Imported Images?

Jul 24, 2013

I recently bought new computer and installed windows 7. But now when I try to scan and import images from the internet with Paint Shop Pro the images are fouled with lots of squares of black.

View 3 Replies View Related

Paint Shop Pro :: Colorize Black And White Photos

Jun 28, 2011

Tried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?

View 3 Replies View Related

Paint Shop Pro :: Levels Adjustment Windows Black

Jan 4, 2013

When I pull up the levels windows both are black. If I reduce the image in the windows, I get a small black square. I have used this feature on various versions for years.

View 1 Replies View Related

Paint Shop Pro :: Can't Click And Drag Image With Mouse When Using Full Screen Preview Under Edit Tab

Aug 17, 2013

I can't seem to click and drag an image with the mouse when using Full Screen Preview under the Edit Tab.

I see the hand icon and the scroll bars when the whole image can't fit on the screen but when I left click it's like I hit the Esc button.

Clicking the scrollbars will work but isn't as convenient. Under the Manage tab it works correctly. I have reset the workspace with no luck.

I use this feature a lot and would like to know if others have this problem.

The problem existed in X5 SP2 and now X5 SP3.

View 6 Replies View Related

Paint Shop Pro :: Creating A Black (or Any Solid Colour) Background

Jun 22, 2011

I have seen photos where the background is black. Is it possible to do this with Photo Pro X3 Ultimate? If so, how? I'm retired (read as "older" and not as sharp as a younger person) and new at digital photography.

View 5 Replies View Related

Paint Shop Pro :: X4 - Selective Color On Black And White Photo

Nov 14, 2011

How to create a photo that has a specific area of a photo containing the original color and the rest of the photo be black and white. I am using Corel Paitshop Pro X4 Ultimate.

View 3 Replies View Related

Paint Shop Pro :: Black And White Are Reversed After Flood Tool?

Jun 18, 2013

I started with a tif image that's a black & white drawing and used the fill tool to fill in some black areas that were supposed to be solid, but weren't. I also did a lot of cutting to get rid of specks on the image. It looked fine when I closed and saved it, but when I went to convert it to a PDF, all my tif's have a black background and white lettering--should be just the opposite. I have gone into the images and they all look that way (apart from the PDF). I'm guessing this is a layer issue, but I'm new to this program and can't figure out what I did wrong and how to fix it. I really don't want to start over. So, to restate, everything that should be black is white and all that should be white is black.

View 2 Replies View Related

Paint Shop Pro :: Saving As EPS Turns Colors To Black White And Grey?

Sep 14, 2012

I am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.

View 2 Replies View Related

Paint Shop Pro :: Civil War Photos - Remove White Specks / Black Spotches

Nov 7, 2013

I would like to get some variety of photos looking like they were taken during the civil war era. This would include white specks, black splotches, blurred edges, irregular black edges, etc. I have looked for ways in which to accomplish this and have not been successful at this.

Currently, I am using the following to varying degrees: Sepia Toning/Black and White, Blur, Salt and Pepper noise, and Vignette.

I have PSP 5

View 4 Replies View Related

After Effects :: Preview Is Just A Black Screen Throughout Entire Preview / Titles Never Show Up

Jan 2, 2014

I'm trying to edit a set of titles made in Premiere in After Effects, and after I import the file (as a Premiere file) then load the sequence into the timeline; the preview is just a black screen throughout the entire preview. The titles never show up.

View 2 Replies View Related

Premiere Pro :: Black Borders Around Time-lapse Movie

Apr 19, 2014

I made my timelapse movie in quicktime then imported it into my premiere pro cc sequence and there are black borders all around it whilst the other clips are fine and in the format i want the movie to be shown in.

View 3 Replies View Related

Paint Shop Pro :: Space Added To End Of Text / Text Off-center?

May 8, 2011

I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.

With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.

View 11 Replies View Related

Paint Shop Pro :: Make X3 Text Tool Remember Text?

Mar 22, 2012

Way back when I originally bought PSP X3, I used it for a short while then went back to X2. Mostly because the X3 text tool would not remember text I had used. Now I've recovered from a hard-drive death and want to move forward and use my X3.

How can I make the X3 text tool remember text?

View 2 Replies View Related

AutoCAD LT :: Why Is PDF Preview Blank

Jul 31, 2013

I am running Autocad LT 2013 Windows 7 on a MacPro OSX using Fusionware. I am working in Model space.

When I want to plot a pdf using either the Plot command and Cute PDF writer, or the Output to PDF command, the preview shows up as a blank page. If I continue to Plot the pdf is written correctly, I just can't preview it to confirm it is correct.

When I try this via the Plot dialog box I get a white screen with a "Preview Job Progress" window and 2 buttons, Help and Cancel, neither of which is clickable. (See attached) I have to right click>Exit to get back to the dialog box. I have been using this method to print pdfs for 5-6 years with no problems.

When I use the Output tab I just get the white screen, which I then close and go back to the tab controls. The same thing happens when I use the Page Setup manager.

I don't know if this is connected but I have lost all ability to send prints to any of the printers in our office. I have downloaded the drivers again to no effect. So now I have to make pdfs, save to a file on our server, switch to the Mac side of the computer, and send the pdf to the printer.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved