Premiere Pro :: Import Of H.264 Video Results In Green / Distorted And Doubled Image
Sep 17, 2012
I've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
View 22 Replies
ADVERTISEMENT
May 13, 2013
I have a problem with premiere pro cs6 every time I export my video I get weird green lines on the left and bottom sides of my video. I'm working with different aspect ratios and frame rates in my timeline but I heard thats ok. This has been a pain since every thing is ok only the green lines on the edge of my video ruin my viewing experience.
View 4 Replies
View Related
Aug 8, 2011
I am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
View 3 Replies
View Related
Sep 27, 2012
I'm working on pdf image files, 300 dpi, and I want to use the Image Trace tool to vectorized these ones. The result has to be under 4 colors, and the file is a mozaic of photos calibrated 3mm x 3mm.
The purpose is to vectorize the whole image ( composed with approximately 800 photos )I did different tests with the settings of the Image Trace tool with samples of 12 x 12 mm ( 4 photos x 4 photos ) and the result is correct. But when I try to do the same with the entire image, the result is just horrible The entire image is sized 200 mm height and 130 mm width, but the import format is exactly the same than the samlpes I made my presets on.
I was thinking that Illustrator should act the same with the full image than with the small one, it just took more time to calculate the rendering, but apparently not.
View 4 Replies
View Related
Apr 1, 2014
The whole video doesn't import, only part. I can import the entire video in AVS Editor, but not Premier Pro.
View 4 Replies
View Related
Apr 22, 2014
When I import a sequence into another, only the video imports now
View 1 Replies
View Related
Apr 17, 2014
I'm importing a 878,367KB .mov file into Premiere Pro - and while the full audio is there, the video screen is just green.When I put it into a sequence, the preview pane is black - and when I try to render it, it says "Error compiling movie. Unknown error."
View 4 Replies
View Related
Mar 10, 2014
why when i import a video into my sequence does the picture invert and look like a negative
View 9 Replies
View Related
Dec 4, 2013
I am using Premier Pro CS5.5. I want to know if I can import a .mts file and use Premier to convert it, or save the file as, a .mov, .wmv, .mp4 or other video file format?
View 5 Replies
View Related
Feb 15, 2013
MPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies
View Related
Jan 9, 2014
Can we import a clip to "project" panel from custom panel in "premier pro".
View 3 Replies
View Related
Mar 16, 2014
Ive been attempting to import AVCHD video footage captured on a Panasonic into Premier Pro CS6 on my MacPro. I've tried this from the camera and after copying the entire folder to my desktop. The footage is there, but has no audio!
View 6 Replies
View Related
Jan 29, 2014
I want to stretch my video clip but the normal double clicking on the image and stretching it out, isnt working. I also cant use my effects and I cant seem to find the effect controls panel.
View 3 Replies
View Related
Jan 22, 2014
We've got some Sony XDCam footage coming into Premiere in a .MXF container. Playing back the audio yields a very 'crunchy' distorted sound. 'S' sounds sound lispy and there is generally a lot of additional noise.Opening these files in Sony Vegas doesn't have any audio problems at all, everything sounds fine which leads me to beleive that Premiere is the problem.
However, I've tried exporting audio from Sony Vegas to re-sync with the clips in Premiere, but the audio STILL sounds distorted and crunchy.Opening the audio in Audition ends up being a little better, but still not as clean as how the original audio sounds in Sony Vegas.
Here are all the details I've got for ya:
- Audio recorded in 3 channels, 2 stereo channels from the on board mic and 1 channel through a boom mic (The Sony cams handle up to 8 channels)
- Footage was ingested through Prelude and renamed when copied. (The actual files were not renamed, only the metadata that Prelude tags onto the clips)
- We are working on PC machines (Windows 8) as well as Mac (OS Mavericks) and ALL machines are having the same problem.- We experience the same problem regardless of whether the files are stored on our network NAS or locally
- We are all on the latest version of Premiere CC 7.2.1 (4)
I suspect that it has to do something with how Premiere is decoding the audio from the .MXF clips. Sony apparently decodes it just fine, which makes sense since the Cameras are Sony cams to begin with.I am now noticing that ALL audio in Premiere is experiencing this same effect! Regardless of container/codec.
View 1 Replies
View Related
Feb 2, 2014
I'm making a video for work based on a popular UK quiz show. The video is going to be filmed in my office and to give it a degree of authenicty I would like to import an image of the show in the background. I dont have access to any other software other than Premiere Pro and wondered if there's any way this can be done.
View 3 Replies
View Related
Aug 23, 2011
Is there a simple way to add a white border around a still image or video clip in Premiere Pro CS 5.5? I've seen the suggestions for adding a radial shadow and am unsatisfied with the results; it's nearly impossible to center the image within the border and many other suggestions out there do not address CS 5.5.
View 20 Replies
View Related
Apr 1, 2014
I have a project in which I need to do a 3 or 4-way split screen. While it's easy to set that up and position them at the right places, I cannot seem to find a way with which I could change the scale of the video with an Image Matte applied without changing that of the Matte as well. I can use offset and push the video around "underneath", so to speak, but I would love to be able to scale that video underneath as well. I know that could be done with a layer on top obscuring the video below but I find that rather cumbersome, especially with 4-way or more, adding quite a few more layers.
View 4 Replies
View Related
Apr 2, 2012
I have a video clip (.MOV) which I have added to my project.
When I preview the clip itself the sound is perfect. However when I preview he actual project, the sound is distorted.?
View 1 Replies
View Related
Oct 29, 2010
Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
View 11 Replies
View Related
Jan 8, 2012
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies
View Related
Feb 17, 2014
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
View 1 Replies
View Related
Mar 2, 2014
it included some bad language, but that can be censored. It's nice to know Adobe only cares about their image rather than solving their users' issues with the software that they bought. No wonder people are switching sides to Avid or Apple. But that's hardly suprising in this marketing world.
Ok so basically I've been working on a project similar to all the other projects in the last months. Nothing fancy: a simple green screen keying, some added titles and a bit of Colour Correcting and audio EQ.
Everything looks fine in the project: both reference and monitor ouputs looks pefectly fine. Until the actual render is reviewed and then the **** hits the fan! I've added screenshots below. Using latest version of Premiere on OSX, only using native plugins and exporting as H.264 MP4 optimised for Vimeo streaming.
View 10 Replies
View Related
Apr 21, 2014
In Premiere CC, the photographs start distorting in bands of pink and green colours or something that looks like white noise. I think the media is not showing up fast enough or something. I have also seen this in the final export. I cannot finish my project if this is how it is going to turn out.
View 1 Replies
View Related
Feb 13, 2014
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies
View Related
Sep 18, 2013
How can I remove the green screen from a video sequence in Photoshop?
View 4 Replies
View Related
Mar 14, 2013
My video with IFrame at 100Mbps shows green video within VS Pro X6.With VS Pro X2, it is showing fine.
Video was recorded using Data Video HDR-45
Video details:
File format: MPEG-2 (Transport stream)
File size: 4,182,000 KB
Duration: 317.280 seconds
Video type: MPEG-2 Video, Upper Field First
Total frames: 7,932 frame(s)
Attributes: 24 bits, 1920 x 1080, 16:9
Frame rate: 25.000 frames/sec
Data rate: 100000 kbps
Audio type: MPEG Audio Layer 2 Files
Total samples: 15,229,440 Samples
Attributes: 48000 Hz, 16 Bit, Stereo
Layer: 2
Bit rate: 384 kbps
View 3 Replies
View Related
Aug 21, 2006
I have Photoshop 5.0 Limited Edition.
I have just bough a Toshiba Satellite P100 which has a 17" screen. I have put a photo of my daughter on the Desktop but because of the width of the screen it is distorted sideays (widened).
How can I use Photoshop to cancel the datortion by compressing it?
View 4 Replies
View Related
Apr 8, 2012
I'm trying to synchronize my folders, and LR4 is consistently crashing when it attempts to display the "Import Results" window. This is on Win7 Pro, using LR4 64-bit. A portion of the pix being imported are successfully stored in the catalog, and the remainder are not. When I restart LR and attempt to synchronize again, the process repeats: find the new pictures (the ones that weren't stored in the previous attempt), start importing them, reach apparent 100%, start to display "Import Results" window and immediately crash.
I'd like to reach the point at which no pix remain to be imported.
View 2 Replies
View Related
Oct 1, 2013
I have installed Infrastructure Design Suite 2014 on one of my users' workstation and one of the several problems she is having I can't find info on anywhere: When she uses the DWG to PDF driver she is getting strange artifacts that, at first glance, look like little blocks randomly placed around her drawings. These are always over/ in viewports. They do NOT show up in plot preview. I tried plot and publish. Both give same results. When zoomed in you can see they are tiny little viewport control dialog boxes that seem to have been placed on the plot at random.
View 4 Replies
View Related
Dec 17, 2010
I have a 16:9 video and when I select "save as still image", the resultant image is squeezed into 4:3 and doesnt look good. I cant see anything in preferences that allows me to adjust this. Can I tweak "save as still image" so it keeps the correct aspect ratio?
View 2 Replies
View Related
Aug 20, 2006
I just edited my my top 15 pics of a shoot i just did. I saved them in the RAW format. I didnt save the origional NEF, because i didnt want to not have the origional .NEF i took. It also saved a .XMP of the file. Ok, so saving goes fine, but when I open it again... it asks me about size, and some other things... I have no idea why its asking these things... I put in some numbers close to the picture size... and it opens grayscale, and totally distorted....most of them are just many lines...
View 5 Replies
View Related
