Video type: MPEG-2 Video, Upper Field First
Total frames: 7,932 frame(s)
Attributes: 24 bits, 1920 x 1080, 16:9
Frame rate: 25.000 frames/sec
Data rate: 100000 kbps
When I produce a MP4 video file in X4 it shows a thumbnail in the video file. I cannot figure out where this image comes from. It seems sometime to be the first video image from all tracks, but sometimes it is just the upper video track and sometimes it is a picture from a later point of the video. How does it work? And how can I control which image is used?
I downloaded a video and at the bottom is a crawler(bar at the bottom that shows sports scores). I want to crop this off-is there a way to perform this function? I saw the cropping FAQ but couldn't find how to crop the bottom. I am using VS X2.
I have a problem with premiere pro cs6 every time I export my video I get weird green lines on the left and bottom sides of my video. I'm working with different aspect ratios and frame rates in my timeline but I heard thats ok. This has been a pain since every thing is ok only the green lines on the edge of my video ruin my viewing experience.
I've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
The organizer in my PSPX5 U only shows video files, AVI, MOV, etc. I will not display JPG or other still image formats. I also have VideoStudio X5 U installed. I removed PSPX4 where the organizer worked properly. I cannot find a setting to disable or activate a file extension other than in the Preferences, where there is no mention of a video format.
I have a several dozen shots, Quicktime ProRes 422 HQ. When I try to import them into Premiere CS6 all the arrives in the bin is the audio of the clips. The video has been stripped. But if I play the clips outside Premiere - just double click them open and play them with Windows Media Player, they play fine.
I'm not having trouble with any other formats.
Just the ProRes. And I must have the necessary Quicktime ProRes plug-in installed, as the individual clips open and play fine.
I recently purchased Pro x6. While I love the new features, something has been happening today that is frustrating. I captured some video from my Canon HG10 and placed it on the timeline. When I try to play it in the editor, a green screen appears over the video. I can hear the audio but cannot see it.
I noticed that you can click on the top of the time line to put green triangles at various places at the top of the story board. I am not sure what they are for other than to mark a place on the timeline. I also noticed that when I burned the video to disk, there was a skip or brief pause at the exact location where the green marker was located. So I have two questions:
1 Was the "skip" at the marker purely coincidental or was it caused by the marker and 2 What are the markers for?
Used the software to create a virtual spokesperson for their own website? I am new toe green screen techniques and want to create a virtual spokesperson for my own website. What I mean by steps is, if I shoot the video can I use Corel to actually get a product ready to be used in a way like this?
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
I am trying to render some small animated clips to be used as overlays in home movies. I am animating in a program called Poser. I animate 30 to 60 second clips rendering them over a green background (0 blue, 0 red, 255 green) and output them in Uncompressed AVI at 1280x720. When I bring them into VS6 they look great on track 1 but when I put them onto an overlay track they suddenly 'go small'; I right click and change to 'Project Size' (which I have set to 16:9) and apply the Chroma Key; this is where I begin to get the Jagged Edge effect? Especially on anything with a straight edge - for example: I have a Skull and Crossed Swords that I want to spin 360 - the sword edges become so horribly jagged, it just is not acceptable.
However, still using Poser as my 3D rendering engine, I can render a still and save out as a PNG and it will import into VS6 and overlay (as a Still) just fine. I did try rendering Each Frame of the spinning skull as PNGs and assemble the animation in VS6 and again I ended up with the jagged edges...even if this did work it would not be do-able with my 6sec clip of a waving flag (too many frames!)
Perhaps my AVI aspect size to VS6? I notice that while in VS6 I am working in only 720x480 however my final target is to burn to DVD in Wide Screen (I also would like to have MPG and/or AVI to play direct from computer on home entertainment system to TV)
A little background: I do historic reenacting at various events, shows, parties, Tall Ship events, Ren Fairs, and such. The overlays I want for various use: Title effects, overlay photos/videos within the project. Video files come from my Sony HDR-CX430V, photos from Canon SD790IS.
I've attached a leaf image. We'd like to "Autumnize" the leaf even more and remove the green from the leaf. I've tried playing with the various options in the Color drop down (Color Balance, Hue Saturation, Colorize, Brightness-Contrast, Threshold, Levels, Curves), but I can't seem to do it.
I had installed the NewBlue title Ex which link one gets when one registers VS X5. Since I did not prefer the same (compared to heroglyph) i uninstalled it, but the name NewBlue Titler Ex still appears inthe drop down FX menu tab. Is there some way to remove this redundant entry?
I am using a competitor product for video editing and now I am looking for a new product since the support there was really bad. I tried the testversion of Videostudio X4 and downloaded the recommended file from the website which is the german version. I installed it on a XP 32 Bit machine and also on a Vista Ultimate 32 Bit machine.
In both cases the first dialogs (welcome and registration) after running the program are in Chinese language. Now, the problems are:
- Although I can translate the contents by google translator I do not register the program in this case. I don't know what is comming up after that.
- The Corel support does not do anything when you don't specify a registered product.
I record a program with my computer. When I get two recorded, I take each episode and "multi trim video' and cut out the commercials. I do it for each one. Now I have two episodes without commercials I open VS and 'add video to timeline.' I do that for each one and now have two shows i save together. I watch them as a 90 minute movie every two weeks instead of each week 45 minute.
For several years, when I save the video "same settings as the video.." it saves it pretty quick. Just as you would count, 1, 2, 3, 4, 5,.... until 100%. The screen is blank when it does this. This has worked fine for years. Resonantly, without changing anything, when I save the file, it goes really slow and the video shows up on the screen when saving. In stead of taking maybe 100 seconds, it takes hours. It never had the video show up and go so slow.
I have a video file created from one of my old VHS tapes. Unfortunately the display shows two rows of tracking lines about two inches from the top and bottom. Can VS ProX2 filter them out?
In my project I have an iframe, and I want to open a link in that iframe. But with a button which is outside the iframe. I thought that putting the name of the iframe in the target area might work. And in Safari work, but not in Firefox and Internet Explorer. These browsers opens the link in a new window, even changing the name in the target.
I've placed my Edge animation in an iFrame.I would like to be able to trigger the animations in the Edge file, by clicking on links in the parent document.
I have a main page with a container (named BoxPlay) and a button. And I have an other page (page2) with severals animations on it : animation 1, animation2...
I would like to load the page2 but directly with one of his animations.
Code of the button : var container = sym.$("BoxPlay"); container.append('<iframe id="currentPageHolder" width="'+container.width()+'" height="'+container.height()+'" src="pages/GallerieHomePage/GallerieHomePage.html" frameborder="0" scrolling="no"></iframe>');
How can I specify to load also animation 1 or animation 2 ?
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
I have a website banner made in edge with links to other pages of the site. The banner itself is within an iframe (Generally I avoid iframes but I had no option with this one). If you click a link, it will take you to the right page. However if you click the browser's back button, the original page begins to load but quickly redirects you forward again, thus virtually removing the back buttons functionality. However if I click "back" a second time, it works.
Another peculiar thing is that when the page loads, the contents of the page that I am navigating to start to load within the iframe before it redirects. I tried adding "_parent" as a target attribute to all my links but the problem remains. Does edge automatically detect iframe usage and assign link targets to the _parent frame with jQuery?
This is a tricky one, but it may just be that I don't understand the syntax,
Situation:I have an Edge Animate composition that is acting as an interface and container into which other content is embedded using an iFrame. I have several functions in Stage > creationComplete, and for one of the embedded content pieces, I want to include a button that calls one of the Edge functions.
Challenge: I have read about referencing elements within Edge when it is the Edge file that is embedded on an HTML page, but I cannot figure out how to reference Edge in the reverse.
I have tried these options where headerselect(page) is my function:
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
