I just edited my my top 15 pics of a shoot i just did. I saved them in the RAW format. I didnt save the origional NEF, because i didnt want to not have the origional .NEF i took. It also saved a .XMP of the file. Ok, so saving goes fine, but when I open it again... it asks me about size, and some other things... I have no idea why its asking these things... I put in some numbers close to the picture size... and it opens grayscale, and totally distorted....most of them are just many lines...
In Lightroom 4.2 when open and I want to edit in PSE 10, I go to Photo, edit in PSE 10, and PSE 10 opens, but there is no image. I want to edit in PSE 10 and can't. Using LR 4.2, and attempting to edit in PSE 10, PSE 10 opens but no image opens to edit
I have just bough a Toshiba Satellite P100 which has a 17" screen. I have put a photo of my daughter on the Desktop but because of the width of the screen it is distorted sideays (widened).
How can I use Photoshop to cancel the datortion by compressing it?
The image i took was one of my desktop accessories from about one ft. away and at 24mm wide angle. in the image"s four corners is the black edges of the lens.(raw one) Also the front edge of the desk is curved inwards and i have some bowing of the desktop accessories. how can this be corrected? I am sending two images one jpeg and the other the raw image.The second one is the RAW one. What else can be corrected in the raw image.
When I scan my photos they are not always straight. I use Image-RotateCanvas-arbitrary command to change the percentage of rotation to straighten image.
I automated the process in "actions" menu to rotate canvas 0.5%CW and 0.5%CCW.
I decided to play a little bit with newly made "action" hotkeys to get used to them.
Now the problem
When I rotated the image 5 times CCW and 5 time CW I noticed that it became significantly distorted, blurred. I tried manually do the same (without automation) same result. With every additional step of rotating, image becomes more distorted, so it is not faulty automation...
Question:
Is it normal?
P.S. I scan images at 24 bit color, 150 resolution.
I have a 16:9 video and when I select "save as still image", the resultant image is squeezed into 4:3 and doesnt look good. I cant see anything in preferences that allows me to adjust this. Can I tweak "save as still image" so it keeps the correct aspect ratio?
When I add a gif layer to another one the image becomes distorted and really bad. I did this the first time and I was able to make 8 gifs play in a row without any problems.
I have a problem with exporting bitmaps (for icons)., The resulting image is totally distorted compared to the original document. I define document size to 16x16 pixels with a 72 dpi resolution. I would like to have the exported bmp image to be an exact copy of the illustration, thus having unchecked the anti aliasing function and every object is designed to match the pixel size. The same happens if I try to convert the graphic to a bitmap, see screenshots below. I have attached the original cdr file.
i drew this picture waaaay back but i never found a solution. the outline i did always looks like this no matter what size i outline it at. is there a solution to this?
I have an EPS file that I am placing in Indesign doc. The image looks great in Illustrator, but in InDesign once placed there is a wave pattern to the colours (like an old tv) – not a smooth gradient. Is this a color profile problem? Or issues with how to maintain a vector image quality when importing into indesign? Upon export to PDF, again the EPS file exports fine, but InDesign export the colors aren't smooth (see sample images). The color is formatted for print (Fogra 39) for both.
changing the working space to setting for print in InDesign. Under “placed content” should keep existing assignments, enable all profiles, disable all profiles be selected?
I am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
I've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
I purchased a photo online and it will only open in raw format. I try to save it and it turns into a washed out mess. I want this to look like the file I saw online. Is there a way to open and save without it turning into a washed out mess?
I am attempting to have photoshop open a 16bit grayscale ramp that I generated in matlab, but a problem is occuring with mach banding still occuring eventhough photoshop is setup to be working in 10bit images right now. Are there other settings that I need to change inorder to fix this problem. (also I am using a 10bit monitor which is why I am working in the higher bits).
When I open one particular image in photoshop CS3 the thumb in the Open menu looks correct, but the image opens with a reddish tinge over the whole thing. If I then double-click the image layer in the Layers window, the Layer Style menu pops up, the tinge removes itself and the image looks as it should. None of the other images I've been working on have this happening.Does anyone know what's up here. This is a .psd file with no layers above the image layer.
Photoshop opens automatically when I save any image from anyplace on the web and it is nerve racking! CS5 is the version. how to stop it from opening like that?
I use Photoshop 6. Whenever I open an image, it opens with crop tools around it. I would like to change that and have the images open with the Move tool selected instead. How an I change this default?
For some unknown reason when I try to open an image file using PSE9 the image opens at 1% resolution instead of full screen. I have to manually enlarge the file to 100% and then enlarge it's window as well. I've already tried re-installing the software but the problem persists. Using Mac OS10.6.8
On Windows 7, R-clicking on an image shows "Open With" CS6 but only 64 bit opens. How to also have 32bit as a choice? Since the majority of my plugins only work on 32bit I find using 64bit unfortunately useless. Hence I wold like to know if it is possible to right-click on asn image with explorer and have it open the 32bit version.
The Organizer and the Editor stopped working together in just 1 of my catalogs. It happens to be the catalog in which I have done the most image manipulations such as renaming, stacking, albums, rating, etc. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set. Other than deleting and re-creating the catalog, how can I get Editor to open the image from Organizer like it used to do?
Whenever I open photos from Lightroom (that already have lightroom adjustments) edit in Photoshop CC only opens Photoshop but does not open the image.
If I open Images with "Edit in Photoshop" that DO NOT HAVE Adjustments, the image will open up in Photoshop correctly. I just came from Windows to Mac.
I use gimp for basic graphic work on images my clients send me. I mostly receive vector pdf's, but sometimes when i open them, the image is displayed all in white with a white background. i've played around in gimp to try and get the image to show but cannot succeed. i know there is an image in the file because i send it to a friend who uses illustrator and he manages to make the image appear somehow.
Everything has worked perfectly until today. Yesterday evening, I received an update notice from Adobe for an update called Adobe CSXS INfrastructure CS6 and I agreed to let install. It installed.
That seems to be where the problem started. Now, when I send an image from LR to Photoshop, it does not open. The "Edit in" command isn't working. PS opens, but the image does not appear.
I just downloaded and reinstalled PS CS6. I then asked PS CS6 to update, which it did. When finished, there was an error saying that Adobe CSXS INfrastructure CS6 could not install. Error code: U44M1P7
The good news is that now it all works again! So, the problem lies in the Infrastructure update, which I will not allow to update again.
Windows 7, 64 bit Photoshop CS6, all updates Lightroom 4.1, all updates
Why and how can I change my CS3 photoshop always opening with the first image I worked with after installation, months ago. Otherwise opening and closeing works fine. But every time I initiate the application, that first image opens.
I have been having a problem using photoshop on the second monitor connected to my mac.Here i have put photoshop between the two monitors to show the issue.Here is how my mac screen looks and this is how my second monitor [LG] looks
I have checked all the plugs and no other programs have this problem.I have photoshop CS6 and up until just over a week ago it was working perfectly fine on both monitors.
I am trying to design wedding invitations for my sister, but the fonts look distorted. I use a template created by my printing company, and the resolution is automatically set at 250. I view the sample at 100%, but can see where the edges of the fonts look "pixilized" and not crisp. Even when I print them they look this way. I have tried over 20 fonts but they are all doing this. Is there a special setting that I need to use to have the edges of the fonts look crisp?
