Photoshop Elements :: How To Correct Distorted Raw Image
Feb 14, 2013
The image i took was one of my desktop accessories from about one ft. away and at 24mm wide angle. in the image"s four corners is the black edges of the lens.(raw one) Also the front edge of the desk is curved inwards and i have some bowing of the desktop accessories. how can this be corrected? I am sending two images one jpeg and the other the raw image.The second one is the RAW one. What else can be corrected in the raw image.
View 2 Replies
ADVERTISEMENT
Oct 26, 2013
Is it possible to correct a digital image from an old scanned slide, which has been scanned back to front, using Photoshop Elements 10?
View 3 Replies
View Related
Jul 24, 2013
I have Photoshop Elements 10, and am trying to print a black and white drawing that was scanned, then sent to me via email. When I print out this image, it has an overall green hue and I cant figure out why. I have the black/grayscale box checked in the advanced print settings, but that has still not fixed my problem.
View 1 Replies
View Related
Aug 21, 2006
I have Photoshop 5.0 Limited Edition.
I have just bough a Toshiba Satellite P100 which has a 17" screen. I have put a photo of my daughter on the Desktop but because of the width of the screen it is distorted sideays (widened).
How can I use Photoshop to cancel the datortion by compressing it?
View 4 Replies
View Related
Aug 20, 2006
I just edited my my top 15 pics of a shoot i just did. I saved them in the RAW format. I didnt save the origional NEF, because i didnt want to not have the origional .NEF i took. It also saved a .XMP of the file. Ok, so saving goes fine, but when I open it again... it asks me about size, and some other things... I have no idea why its asking these things... I put in some numbers close to the picture size... and it opens grayscale, and totally distorted....most of them are just many lines...
View 5 Replies
View Related
Mar 6, 2009
When I scan my photos they are not always straight. I use Image-RotateCanvas-arbitrary command to change the percentage of rotation to straighten image.
I automated the process in "actions" menu to rotate canvas 0.5%CW and 0.5%CCW.
I decided to play a little bit with newly made "action" hotkeys to get used to them.
Now the problem
When I rotated the image 5 times CCW and 5 time CW I noticed that it became significantly distorted, blurred. I tried manually do the same (without automation) same result. With every additional step of rotating, image becomes more distorted, so it is not faulty automation...
Question:
Is it normal?
P.S. I scan images at 24 bit color, 150 resolution.
View 1 Replies
View Related
Mar 6, 2013
The last few days my file preview icons on my computer are looking strange. Before they used to be a smaller version of the image, now they look blurry with a black frame around them. The jpeg file itself is fine when I open it in preview or back into PSE, I havn't changed any settings and I am always saving it at the highest resolution.
View 1 Replies
View Related
Dec 17, 2010
I have a 16:9 video and when I select "save as still image", the resultant image is squeezed into 4:3 and doesnt look good. I cant see anything in preferences that allows me to adjust this. Can I tweak "save as still image" so it keeps the correct aspect ratio?
View 2 Replies
View Related
Dec 26, 2013
When I add a gif layer to another one the image becomes distorted and really bad. I did this the first time and I was able to make 8 gifs play in a row without any problems.
ex: [URL].........
View 1 Replies
View Related
Apr 18, 2013
icon.cdr
I have a problem with exporting bitmaps (for icons)., The resulting image is totally distorted compared to the original document. I define document size to 16x16 pixels with a 72 dpi resolution. I would like to have the exported bmp image to be an exact copy of the illustration, thus having unchecked the anti aliasing function and every object is designed to match the pixel size. The same happens if I try to convert the graphic to a bitmap, see screenshots below. I have attached the original cdr file.
View 2 Replies
View Related
Nov 21, 2011
i drew this picture waaaay back but i never found a solution. the outline i did always looks like this no matter what size i outline it at. is there a solution to this?
View 3 Replies
View Related
May 23, 2012
Scaling - for some reason the image get distorted after scaling. see example:
Each time I scale it'll do it differently. this time it made the right side thicker.
Alignment - the bounding box has offset and when aligning it doesn't align the objects right:
View 3 Replies
View Related
Apr 8, 2014
I have an EPS file that I am placing in Indesign doc. The image looks great in Illustrator, but in InDesign once placed there is a wave pattern to the colours (like an old tv) – not a smooth gradient. Is this a color profile problem? Or issues with how to maintain a vector image quality when importing into indesign? Upon export to PDF, again the EPS file exports fine, but InDesign export the colors aren't smooth (see sample images). The color is formatted for print (Fogra 39) for both.
changing the working space to setting for print in InDesign. Under “placed content” should keep existing assignments, enable all profiles, disable all profiles be selected?
View 2 Replies
View Related
Aug 8, 2011
I am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
View 3 Replies
View Related
Sep 17, 2012
I've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
View 22 Replies
View Related
Apr 16, 2013
I have a Nikon P7000 with a 28-200 mm wide zoom Nikkor wide lens. I have several RAW images that are out of focus. I took these when I was just learning how to use this camera. How can I use the attributes of CS5 to sharpen the image or bring it back into focus? Should I try to use the correction lens features?
View 2 Replies
View Related
May 29, 2013
I have my own large format printer which accepts 54" wide rolls of media. I plan on printing a number of photos on canvas, and am wondering about a few things:
- If I wish to make a 40" x 30" print, what is the correct way to re-size the image in PhotoShop (CS6)? Out of my camera, the images are 4592 x 3448 px, so do I simply punch in 40" x 30" in the "Image Size" menu, and then select "Bicubic Smoother (for enlargement)"? (see attached image). Or should I just re-size the image in the RIP software?
- Some of the images were shot in Raw, but some as JPG. For the ones that were shot Raw, should I also save them as JPGs before printing, or is TIF better?
View 1 Replies
View Related
Oct 22, 2005
I am thinking of creating a few animated gifs for standard sized banners. I see alot of banners having random people in them, or cars or animals, etc.. anything that will make the banner look more professional and to the point. how do you get those images? Surely the artist doesn't go around the street snapping photos of people and then transfer them onto to the computer. Is there a database of these pics people can use?
View 2 Replies
View Related
Jun 18, 2009
to correct the edge of this picture?
View 5 Replies
View Related
Sep 12, 2012
Shot by a phone camera. I think the child who clicked couldn't focus & couldn't keep still...Not an easy job to fix this,at least i can't.
View 8 Replies
View Related
Aug 2, 2009
I want to may a small flyer for a party. i want to start a new file. what size do i make my file to fit on a 4 x 6 card, or a card the size of a post card?
i have been able to print these sizes but sometime things get cut off the edges. if i knew what size to start with i could fit everything on the flyer.
View 2 Replies
View Related
Mar 15, 2014
How do I correct Error 213:19 so I can register photoshop elements 11 that came with the purchase of a new computer?
View 1 Replies
View Related
Dec 18, 2004
took thousands of photos. Unfortunately a piece of lint got caught on the inner lens of my camera and caused a smudge/lint line to appear about 1/4 of the photos I took. Its relatively easy to pshop out the smudge mark when the defect area is a solid, or nearly uniform area such as sky (clone or bandaid tool, etc). But when it gets into something more complex, such as buildings or otherwise, its going to need a little more manipulation. I am curious to see how members of this community would fix this. I've attached a rather tame image so as to demonstrate the problem. You can see the obvious anomaly in the upper 1/3 of the right margin.
View 9 Replies
View Related
Apr 13, 2013
What is the best way to deal with eyeglasses glare?
View 16 Replies
View Related
Nov 21, 2013
I'm working for a client watermark his images. He has designed a watermark in PS CS6 that extends across the bottom of the image, the full width of the image. Like this:
Obviously, the images to be watermarked are all different widths and the watermark gets scaled up or down accordingly which is not the desired effect. On tall/thin images, the watermark is barely visible. Vice versa on wide or square images. I have tried many different widths of the watermark based on the widest and thinnest images. It works, but still not the desired effect for my client.
I've installed the Adobe Watermark Panel, but it seems that it wants to resize images with a width/height box on the right of the image quality and ppi boxes. (I might be reading that wrong though)
I've also tried several freeware programs. All work fine, but my client doesn't seem to think so.
So the question is, can I apply a watermark that doesn't get scaled? I know image height is a factor. I could write my own application to do it, but this seems like a re-inventing the wheel issue. I think the watermark should be scaled in height to a percentage of the image being watermarked and any excess width should be cut or truncated.
View 13 Replies
View Related
Aug 14, 2013
I take a number of cemetery headstone photos and in trying to keep my shadow off the headstone, I stand to the side and the image usually gets distorted. I have Photoshop Elements 11. I'm sure there is a good way to do it. I tried Filter, Correct Camera Distortion but end up with a worse distortion than when I started.
how do I improve my photo image and make it more square?
View 1 Replies
View Related
Dec 11, 2013
Can you correct a very grainy picture in photoshop elements 12? Picture was taken with a Sony A500 in low light at 6400 ISO (used to stop action) and Raw Format/JPEG. Tryed to correct in raw with no luck.
View 3 Replies
View Related
Jan 8, 2014
When I try to open Elements it says the Scratch Disks are full. How do I correct this problem?
View 4 Replies
View Related
Sep 3, 2012
What is the best technique to correct the purplish cast in old slides that have been scanned?
View 6 Replies
View Related
Oct 19, 2012
In Photoshop when I skewed to correct converging verticals, then I needed to free transform to get the verticals to the right height again. Then I changed the canvas size to include all the photo. I can't figure out how to do this in Elements.
View 6 Replies
View Related
Jun 28, 2006
I have a designer that created this beautiful (but complicated) design in illustrator and now we're trying to get it exported to html. The thing is, most of the images that are in tds we want to be background images so that we can put stuff on top of it. So we need the exported html to generate the image size correctly. For example, I don't want
<img src="someimage.jpg" width="100" height="100"...
but
<img src="someimage.jpg">
The problem is that illustrator for whatever reason is generating the images slightly too small (I guess to make the image size smaller?), then is stretching them using width and height attributes. As I'm sure you guys are aware of, the background attribute has no way of specifying a width and height.
View 2 Replies
View Related
