Photoshop :: Correct Way To Resize Image
May 29, 2013
I have my own large format printer which accepts 54" wide rolls of media. I plan on printing a number of photos on canvas, and am wondering about a few things:
- If I wish to make a 40" x 30" print, what is the correct way to re-size the image in PhotoShop (CS6)? Out of my camera, the images are 4592 x 3448 px, so do I simply punch in 40" x 30" in the "Image Size" menu, and then select "Bicubic Smoother (for enlargement)"? (see attached image). Or should I just re-size the image in the RIP software?
- Some of the images were shot in Raw, but some as JPG. For the ones that were shot Raw, should I also save them as JPGs before printing, or is TIF better?
View 1 Replies
ADVERTISEMENT
Sep 17, 2012
So I create a block on layer 0 and then create the block as a 1 inch by 1 inch block so it is easy to scale up to the size I need but when I try to insert the block at the scale I need it wont resize it to the correct scale. It stays at the 1 inch by 1 inch original block.
View 1 Replies
View Related
Jun 11, 2012
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
View 1 Replies
View Related
Apr 16, 2013
I have a Nikon P7000 with a 28-200 mm wide zoom Nikkor wide lens. I have several RAW images that are out of focus. I took these when I was just learning how to use this camera. How can I use the attributes of CS5 to sharpen the image or bring it back into focus? Should I try to use the correction lens features?
View 2 Replies
View Related
Feb 6, 2013
I am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies
View Related
Jun 13, 2008
I have completed a project and I need to verify that, based on what I implemented, image should be resized but quality of image (both JPEG and GIF) should not be reduced.
My question is it possible to verify the result using photoshop or some other tools? How?
My college said it is hard to check if an image looks different because of image resizing or because of quality loss or because of both. He said I have to create some log files to trace the result. It is a little too much work for me.
View 1 Replies
View Related
Oct 22, 2005
I am thinking of creating a few animated gifs for standard sized banners. I see alot of banners having random people in them, or cars or animals, etc.. anything that will make the banner look more professional and to the point. how do you get those images? Surely the artist doesn't go around the street snapping photos of people and then transfer them onto to the computer. Is there a database of these pics people can use?
View 2 Replies
View Related
Jun 18, 2009
to correct the edge of this picture?
View 5 Replies
View Related
Sep 12, 2012
Shot by a phone camera. I think the child who clicked couldn't focus & couldn't keep still...Not an easy job to fix this,at least i can't.
View 8 Replies
View Related
Aug 2, 2009
I want to may a small flyer for a party. i want to start a new file. what size do i make my file to fit on a 4 x 6 card, or a card the size of a post card?
i have been able to print these sizes but sometime things get cut off the edges. if i knew what size to start with i could fit everything on the flyer.
View 2 Replies
View Related
Feb 14, 2013
The image i took was one of my desktop accessories from about one ft. away and at 24mm wide angle. in the image"s four corners is the black edges of the lens.(raw one) Also the front edge of the desk is curved inwards and i have some bowing of the desktop accessories. how can this be corrected? I am sending two images one jpeg and the other the raw image.The second one is the RAW one. What else can be corrected in the raw image.
View 2 Replies
View Related
Jun 26, 2006
I was wondering if there is a possible way to take a small image and make it larger and clear.
View 9 Replies
View Related
Dec 18, 2004
took thousands of photos. Unfortunately a piece of lint got caught on the inner lens of my camera and caused a smudge/lint line to appear about 1/4 of the photos I took. Its relatively easy to pshop out the smudge mark when the defect area is a solid, or nearly uniform area such as sky (clone or bandaid tool, etc). But when it gets into something more complex, such as buildings or otherwise, its going to need a little more manipulation. I am curious to see how members of this community would fix this. I've attached a rather tame image so as to demonstrate the problem. You can see the obvious anomaly in the upper 1/3 of the right margin.
View 9 Replies
View Related
Nov 21, 2013
I'm working for a client watermark his images. He has designed a watermark in PS CS6 that extends across the bottom of the image, the full width of the image. Like this:
Obviously, the images to be watermarked are all different widths and the watermark gets scaled up or down accordingly which is not the desired effect. On tall/thin images, the watermark is barely visible. Vice versa on wide or square images. I have tried many different widths of the watermark based on the widest and thinnest images. It works, but still not the desired effect for my client.
I've installed the Adobe Watermark Panel, but it seems that it wants to resize images with a width/height box on the right of the image quality and ppi boxes. (I might be reading that wrong though)
I've also tried several freeware programs. All work fine, but my client doesn't seem to think so.
So the question is, can I apply a watermark that doesn't get scaled? I know image height is a factor. I could write my own application to do it, but this seems like a re-inventing the wheel issue. I think the watermark should be scaled in height to a percentage of the image being watermarked and any excess width should be cut or truncated.
View 13 Replies
View Related
Oct 26, 2013
Is it possible to correct a digital image from an old scanned slide, which has been scanned back to front, using Photoshop Elements 10?
View 3 Replies
View Related
Jul 24, 2013
I have Photoshop Elements 10, and am trying to print a black and white drawing that was scanned, then sent to me via email. When I print out this image, it has an overall green hue and I cant figure out why. I have the black/grayscale box checked in the advanced print settings, but that has still not fixed my problem.
View 1 Replies
View Related
Jun 28, 2006
I have a designer that created this beautiful (but complicated) design in illustrator and now we're trying to get it exported to html. The thing is, most of the images that are in tds we want to be background images so that we can put stuff on top of it. So we need the exported html to generate the image size correctly. For example, I don't want
<img src="someimage.jpg" width="100" height="100"...
but
<img src="someimage.jpg">
The problem is that illustrator for whatever reason is generating the images slightly too small (I guess to make the image size smaller?), then is stretching them using width and height attributes. As I'm sure you guys are aware of, the background attribute has no way of specifying a width and height.
View 2 Replies
View Related
May 22, 2013
I have signed up for Adobe CC and now have Photoshop CS 6 for the Mac installed and running.When I come to use the image resize feature, I am still getting the same box as I had in CS5 instead of the new much improved feature.
View 1 Replies
View Related
Feb 1, 2008
Im doing a picture project, where I need to have many layers..
But just how exactly do I resize an image in a layer? If I go Image > Resize Image...the whole image collection of all layers gets bigger...and I only want that specific layer image to get bigger...
View 1 Replies
View Related
May 26, 2005
I have a jpg that is 300*300 and a res of 72 pixles per inch I need to resize for printing by about 300% (I think min print res is 300dpi) without it getting to pixalated.
View 3 Replies
View Related
Jan 8, 2007
I open an image and I want to use a eraser or other tools but it asked me to resize the image
View 1 Replies
View Related
Jun 16, 2006
I do have a image 480X320.
How to resize this image to 960X640 without loosing pixels?
I have tried to Group picture Layer into New Smart Object and then resized the image , after this I added a sharpen from Filter .
But still I am loosing image quality.
View 4 Replies
View Related
Nov 8, 2002
I need to resize images about 6000... they are all different size and they must be all 15k to uploas in PHP on a web server...
I tryed to create a droplet but you can only change the image size but the weight of the image can be control!
View 6 Replies
View Related
Jul 18, 2006
way to resize an image which has been placed on a background, without losing resolution?
I know there's free transform but is there a way you can just type in dimensions and it automatically resizes?
View 6 Replies
View Related
Mar 27, 2008
I can no longer simply type in a new image size using the same method I have used for years--did Adobe change this with a update download? The only way I can now change the image size is by using the up/down arrows.Running WindowsXP--I have both CS2 & CS3 installed.
View 10 Replies
View Related
May 2, 2007
This is probably the most newbie thing ever, but how do I resize an image in a layer by dragging it with the mouse? Can you do this? I wanna fit some things together visually and I don't wanna screw around with numbers.
View 4 Replies
View Related
Oct 29, 2013
How do I resize an image to exactly 909x600
View 9 Replies
View Related
Jul 19, 2012
I have an image of approx. 1000x1000px... I need to make the image 500x200. Everytime I try to resize the image it comes out looking "stretched". Is there any way of resizing or shrinking the image in photoshop without distorting the image?
View 3 Replies
View Related
Oct 19, 2012
I've found that photoshop is distorting the image when resizing. If you have an image and you duplicate the layer, then with the bottom layer set its size (by free transform) to 99% (width and height), then set the top layers opacity to 50%, the image should be evenly blurred but it's not. It is in focus in the middle and blurred around the edges.
View 2 Replies
View Related
Feb 29, 2012
Im creating an app and have to resize a single image to fit for android, iphone,ipad,ipad 2...all different dimensions. I resize my images but they are distorted or look fuzzy?
View 5 Replies
View Related
May 30, 2013
I am having issues moving and resizing a image once it has been "placed" onto the document. It seems to be locked and even when I agree to place the image, I can still not move or resize it. This happens on all file types and CS6.
View 1 Replies
View Related
