Premiere Pro :: Audio Is Randomly Cutting In And Out In Playback
Mar 18, 2014
I have encountered this problem on all recent Premiere projects I've worked on with a variety of audio types. My audio is cutting in and out in a seemlingly random way while the video keeps running fine. Sometimes the audio will play fine for 15 seconds then stop, sometimes it stops and starts after about 2 seconds. I have tried adjusting all of my preferences, settings, audio types, and even video types but the problem always comes back. Spoke to a friend who's new to Premiere and he's having the same problem. Considering moving back to FCP despite the weak interface.
Currently I am editing Canon 5d Mkii footage at 1080p, 29.97 fps. I am using none of the audio attached to the video clips - only editing to a separate m4a music track. My audio is at 44100 Hz. I am playing back video at 1/4 quality. I am running a fully updated Mac Powerbook with a 2.6GHz Intel Core i5 and 8gb of RAM.
View 21 Replies
ADVERTISEMENT
Mar 4, 2014
Using Premiere cs6.Audio keeps dropping out during playback. Audio is present in the export.The audio drops out at random and drops back in at random.
I have tried everything from converting my wav to an mp3/aiff, moving my cache and preview files (and changing my scratch locations) to my computer from my external hard drive, creating a new project, deleting the pek files, even closing all apps.
This is something that just started happening out of nowhere in the middle of a project and has gotten worse and worse with use.
View 7 Replies
View Related
Apr 30, 2013
I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
This is incredibly frustrating have to export out a video just to be able to watch it through.
View 9 Replies
View Related
Dec 24, 2013
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies
View Related
Nov 2, 2010
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
View 13 Replies
View Related
May 24, 2011
I've uploaded MPEGs from Panasonic DMC-TZ7 on HD quality. Audio works fine when playing clips and when played on Quicktime. When playing back on Project, I get a chopped pulsing noise on some parts (although they play OK as clips). I used simple fade to black transitions and trimmed clips. When I finish project, the sound was OK on the first clip but I get no sound or the odd pulse of sound on subsequent clips.
I have re-installed VS pro X3 and downloaded the latest patches but it makes no difference.
View 1 Replies
View Related
Nov 17, 2011
I recently transferred collection of Super8 movies from a VHS tape and burned to a DVD. Upon playback on the computer, as well as preview prior to burning, the audio on the clips worked fine. However when the disc was played on the DVD player ( tried my blu-ray player as well), there was only audio in sections where I had added an audio track. Did I miss something ?
View 4 Replies
View Related
Dec 1, 2012
I am not new to this software and have made many videos. The problem is that I got a new computer with Windows 8 and installed X4 VideoStudio. I can hear the sound file when I select the clip but as soon as I select Project, there is no sound. I am currently uninstalling the program and trying to reinstall.
View 2 Replies
View Related
Dec 11, 2012
Using pro x4, when he imports a AVCHD clip and plays it back, the audio is distorted. The same clips audio is fine playing directly from the desktop, using windows media player. It also plays back fine in another video editing program.
(O.S Windows 7 Ultimate 64bit).
View 14 Replies
View Related
Jun 12, 2011
When I play the video "clip" mode, it is perfect. When I play the "project" mode, the sound cuts in and out. But not on all clips, just the .mov files. The .wav are fine. I just updated all the patches, (to my knowledge) and tried to make a new project.
I just figured out the the corel does not like .mov files. I converted to .wmw and it works.
View 4 Replies
View Related
Jan 2, 2012
I have used VideoStudio 11 happily for some time now but when I recently captured a HDV video in the DV format I found that the audio in some of the sequences plays back normally BUT some does not play back at all or only at a very very low level. The audio on the original tape is fine and I can see the audio waveform on the sequences that don't play back.
View 1 Replies
View Related
Jun 20, 2011
I just finished editing MP4 videos with Corel VideoStudio x3. I exported the videos in the same format. The problem i am having with all of the videos is that when I try to view them with Adobe Flash Player All I get is the audio portion of the video and the Adobe controller is visible. I have tried to exporting the videos in a few different MP4 formats but none seem to work?
View 5 Replies
View Related
Dec 19, 2010
when i have on my timeline more than 1 audio track playing at the same time, the result is the audio sounds choppy and distorted. but when i playback just one audio clip it is fine.
View 4 Replies
View Related
Apr 2, 2013
How to get audio playback in CFX and Action?
I have the Main Audio loaded the Timebar but can hear anything when I press play.
I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.
View 6 Replies
View Related
Dec 27, 2012
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
View 1 Replies
View Related
Jan 18, 2014
Unable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
View 1 Replies
View Related
Mar 6, 2013
I have installed After Effects CS6 in a Mac running 10.6.8(Snow Leopard) with 4 GB ram and have installed all the updates of After Effects. Whenever I try to get the audio output, i get an error: " After Effects Warning: Unable to start audio playback. confirm your audio hardware is properly configured or change the driver selection in Preferences: Audio Hardware "
I tried to reinstall the software and also I tried the Audio MIDI Setup configuration but it too is of no use.
View 13 Replies
View Related
Aug 5, 2011
Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.
View 9 Replies
View Related
Nov 16, 2012
While editing a large video file (one hour), the audio playback worked for a while, but then simply stopped working. Can still see video and edit it, but without hearing the words / background, editing will not be correct. Is there a bug in the software or some way of reseting the file? I have noticed a similar issue with videos in LR4.
View 2 Replies
View Related
Mar 8, 2014
After rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies
View Related
Apr 1, 2014
I was watching through footage and choose a handful of clips ... my video worked fine. Then Friday I came back to start putting everything together and the clips "went blank," The audio could be heard and played back in real time, but the video displays as a black screen or a green screen. I tried rendering, but it said it would take 2+ hours to render the 1 minute of clips I had in my timeline. Even the sections that did end up rendering just showed a blank red screen. Clips are .MTS (which I've used in every project previously with no problem) shot with a Panaconic HMC-150.
I'm using Adobe Premiere Pro CS6 on Windows 8, 64-bit operating system
Processor: Intel Core i7 CPU - 920 @ 2.67 GHz
12.0 GB of RAM
The thing that gets me is that this has worked for months, even worked with these clips a few days ago, and now it seems like everything just vanished.
View 2 Replies
View Related
Feb 10, 2014
Mid-job (and of course now that I need to color correct), PP CC has stopped exporting video to my external monitor. I have tried trashing prefs (holding Shift+Opt at start-up) and it doesn't do the trick. In looking around, I've noticed people having this problem when using some BlackMagic cards, but my monitor is plugged directly into the Thunderbolt connector of my MacBook Pro. I've enclosed my Playback settings.
Oddly enough, when I fire up my old copy of PP CS6 it plays back to my external monitor just fine.
I've had had enough late-night edits that I may have inadvertently initiated some keystroke that changed a setting, but I can't think of what that would be or why a Preference Trash wouldn't reset it.
View 3 Replies
View Related
Nov 4, 2013
I have a 27" iMac (late 2012) with NVIDIA GeForce GTX 680MX graphics card running Mac OS 10.8.5.
I'm using Adobe Premiere Pro CS6.0.3, and when I updated my OS to 10.9 Maverick, I began to experience several problems, including:
The dreaded spinning beachball and "Premiere not responding." "This project was last used with Mercury Playback Engine GPU Acceleration (CUDA) which is not available on your system. Mercury Playback Engine Software Only will be used.Video files - I think they were all .MOV - became "squished" to the top of the Program Monitor (movie only took up about 1/3 of program monitor window). After a long chat with Adobe Support, he indicated that the update to 10.9 Maverick was the problem, so I:
Updated to Premiere 6.0.5, but that did not fix any of the issues.Logged in as "Root," which worked for a while but I also received 3 "Premiere encountered problem and must shut down."Deleted preferences, repaired permissions, basic troubleshooting practices, etc, but problems persisted.
Eventually I restored my computer from a Time Machine backup to a day prior to the OS 10.9 update, and this seemed to fix all the issues. So I was back to Mac 10.8.5 and Premiere 6.0.3.
But the .MOV-compressed-in-the-program-monitor problem began to surface again (see photo below).
So I updated to Premiere to 6.0.5 (but not my OS - it's still 10.8.5), and the "Mercury Playback Engine" error is back.
And the .MOV files are still compressed in the Program Monitor. I have a project that I completed in 6.0.3, but is now messed up in 6.0.5.
Is the only solution downgrading to Premiere 6.0.3, and if so, must I do a clean install of the program from the DVD?
View 11 Replies
View Related
Feb 20, 2014
No playback in timeline or viewers for most projects. Task Manager shows that PrPro CC is doing something, but no visible effect. Scrubbing works, but no audio. Happens mostly on single-track sequences 1920x1080 and larger. My system: (PC) hexacore 3.34 GHZ (12 CPUs), 32 GB Ram, RAID-0, GTX 770 Adobe certified graphics. Worked great before. A bug in the last update (02-19-2014)?
View 17 Replies
View Related
Feb 12, 2014
I have a friend who is just completing a film for a public screening...(about 400 people, mostly volunteers involved in production.)He will be using a regular projector hooked up to a PC to play the video.The source footage is 1080p HD shot on a HVX200. Edited on Premiere Pro CS5.
What format should he use to export so he gets great quality but it can also play without the computer stuttering and dying etc? We've debated between H.264 (mpeg 4 file format) or DVD Blu Ray.MPEG 2 (or some Quicktime format?)
Do we choose h.264 and bump up the bitrate to maximum? Stick with the preset recommendation? There also is h.'264 bluray'..have no idea what difference that makes.
We're not experts on codecs and resolutions etc.Premiere Pro presents this plethora of options.
We want to choose....File ...Export....a format and preset (and maybe adjust a setting or two) and get the best result.
View 2 Replies
View Related
Dec 20, 2013
When capturing HDV clip with Premier Pro CC and playing it in the timeline, the video stutters. I play the same captured clip in Windows Media Player, and it look great. I am using Adobe Premiere Pro CC.-Version 7.2.1(4)
I have the following equipment:
Camera
Canon XH-A1S (set to HDV 60i)
Processor:
Intel® Core™ i7-4930K CPU @ 3.40GHz
Memory:
32 GB
System Type:
64-bit Operating System
Rating:
7.8 Windows Experience Index
Graphics Card
GeForce GTX 760
Solid State Drive
Samsung SSD 840 EVO 750G SCSI Disk Device
Resolution
1920x1200, 59Hz
BD-RW
Pioneer BDR-208D ATA Device
Monitor
Dell U2412M
Clip properties:
Type: MPEG Movie
File Size: 1.1 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;06;04;06
Pixel Aspect Ratio: 1.3333
View 25 Replies
View Related
Jan 16, 2014
I have two recent model 27" iMacs running CC. On one system, playback freezes or I getting a Media Pending screen when playing AVCHD (.mts) footage. The second system can playback all the footage with no probplem.
The troubled system specs are: iMac 27-inch, Mid 2011
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 1024 MB
Software OS X 10.9.1 (13B42)
View 4 Replies
View Related
Dec 23, 2013
I am using a Lumix GH3 camera and recording in .mov at 50fps progressive and 50mbps. My computer is a macbook pro two years old with 2.2ghz intel core i7 and 8gb of ram (1333 MHz DDR3).
The footage plays fine in the editing suite until I add an effect then the playback is extremely slow and jerky even after render. I am new to PPCC and I've just moved from FCP 7 as it didn't recognise the footage at all.
View 4 Replies
View Related
Feb 26, 2014
When editing a multicamera sequence, I keep running into this weird phenomenon where I can't stop the playback. I hit the space bar, start making cuts, then when I want to stop I hit the space bar again and nothing happens. The sequence keeps playing, sometimes stopping after a couple a minute or so, sometimes not until the end of the sequence.
The nested multi-cam sequence has just 4 streams of DSLR video. The machine I'm using has plenty of CPU power and memory and an nVidia GPU, so I'd be surprised if resources are a problem. The source media is on a Raid-0 array.
I've tried switching the resolution to 1/4, but this makes no difference. I have several layers of audio but have solo'ed just one to see if that would work. No.
View 11 Replies
View Related
Nov 29, 2013
I just upgraded to Premiere Pro CC and Speedgrade CC specifically to use the Dynamic Link btween these two programs. Exporting from Premiere to Speedgrade works great, but upon returning to Premiere, none of the clips that have the Lumetri effect added will play. The timeline and the audio play, but the video remains frozen on the last effect-free shot.
I noticed that Premiere can play the preloaded Lumetri Looks, but whenever I try to apply the Lumetri effect that recalls a saved look, again it freezes.
I have a nVidia Quadro 200 GPU, and I even updated to the latest driver hoping that would solve something, but no go.
View 11 Replies
View Related
Jan 3, 2014
I use nvidia card with cuda support GeForce GTX 650 Ti. I was trying to enable Mercury Playback Engine on Premiere Pro and got this results. It's a footage applied on the top with transparency enabled. On the left side MPE is used. Software only on the right side. Why I get this lower quality with Mercury Playback Engine?
View 2 Replies
View Related
