I use nvidia card with cuda support GeForce GTX 650 Ti. I was trying to enable Mercury Playback Engine on Premiere Pro and got this results. It's a footage applied on the top with transparency enabled. On the left side MPE is used. Software only on the right side. Why I get this lower quality with Mercury Playback Engine?
View 2 RepliesI have a 27" iMac (late 2012) with NVIDIA GeForce GTX 680MX graphics card running Mac OS 10.8.5.
I'm using Adobe Premiere Pro CS6.0.3, and when I updated my OS to 10.9 Maverick, I began to experience several problems, including:
The dreaded spinning beachball and "Premiere not responding." "This project was last used with Mercury Playback Engine GPU Acceleration (CUDA) which is not available on your system. Mercury Playback Engine Software Only will be used.Video files - I think they were all .MOV - became "squished" to the top of the Program Monitor (movie only took up about 1/3 of program monitor window). After a long chat with Adobe Support, he indicated that the update to 10.9 Maverick was the problem, so I:
Updated to Premiere 6.0.5, but that did not fix any of the issues.Logged in as "Root," which worked for a while but I also received 3 "Premiere encountered problem and must shut down."Deleted preferences, repaired permissions, basic troubleshooting practices, etc, but problems persisted.
Eventually I restored my computer from a Time Machine backup to a day prior to the OS 10.9 update, and this seemed to fix all the issues. So I was back to Mac 10.8.5 and Premiere 6.0.3.
But the .MOV-compressed-in-the-program-monitor problem began to surface again (see photo below).
So I updated to Premiere to 6.0.5 (but not my OS - it's still 10.8.5), and the "Mercury Playback Engine" error is back.
And the .MOV files are still compressed in the Program Monitor. I have a project that I completed in 6.0.3, but is now messed up in 6.0.5.
Is the only solution downgrading to Premiere 6.0.3, and if so, must I do a clean install of the program from the DVD?
I am using Premiere Pro CS6 and have Nvidia Quadro K2000 graphics card.
The 'video rendering and playback' section of the project settings is grayed out, not allowing me to access the mercury playback engine at all.
How I can use mercury acceleration with this card?
My setup is a Mac Pro with GTX 680 card for mac.I bought this card, thinking it would do what Adobe advertised: "GPU Rendering - Work faster and take full advantage of your hardware with full GPU acceleration, now included in Adobe Media Encoder."
I want to transcode FullHD H264 to XDCAM HD. GPU acceleration isn't happening. The GPU is idle, while the CPU does all the work. Sure, it I want do de-interlace or downscale to an SD Format, the GPU works. But apparently not for transcoding.
Adobe should not suggest that AME can take full advantage of my hardware, because it can't.
Using Corel VideoStudio Pro X3 and either Corel DVD Moviefactory 7SE or Corel DVDFactory Pro 2010, the playback quality of the burned disks is poor. While the completed project has excellent quality both direct from the hard drive AND when using Windows Explorer and just copying directly to the DVD, anytime I attempt to create a simple menu structure, it seems that the entire video is re-rendered causing a significant loss in video quality from the original. I have tried all settings in both packages even just including the created 660MB mpeg4 (rather than the project itself) in Pro 2010 and the result is a 220MB file. Again, when I just use Windows Explorer and copy directly the DVD, the original video is preserved including the 660MB file size and the quality is the same as the project.
View 9 Replies View RelatedIn Photoshop CS6 Extended, the timeline is playing back my animation at a low resolution. How do I change it so it plays back at normal quality, like all the previous versions of Photoshop?
View 4 Replies View RelatedI've created a slide show using layers and have created a video group. This turns the layers into clips in the timeline. I've added a cross-fade transition between each clip in the timeline.
Everything plays back nicely in PS. When I export to mp4 and play it back in Quicktime, no matter what the magnification, the transitions look horrible. Even if I freeze frame on one it's horribly pixelated. I've tried different export options with the same results. Something appears to be happening during rendering the transitions, as if PS doesn't know how to create them. I export to:
Adobe Media Encoder
H.264
High Quality
1920 x 1080 (same as my file)
Frame Rate 30 fps
Field Order: Preset (Progressive)
Range = All Frames
My stats are:
PS CS6
iMac 27"
10.6.8
800 gigs free space
12 gigs ram 8 free
I have imported 5 clips into Videostudio Pro X4, all taken concurrently with the same camera/settings etc. If I play back a single clip, the quality is as I would expect it to be. If I switch to playing back project rather than clip, there is a noticeable drop in quality.
View 3 Replies View RelatedI am using PS in a traditional animation capacity--drawing each frame of animation by hand on a seperate layer. I loved doing this in 5.5 and it worked wonderfully on my machine. There are a couple of problems for me with CS6 that perhaps
My main problem is that when i play back my animation (I prefer to use the clips/layers version as opposed to the "frame" version which is more limited in my opinion), the image quality is horrible. When I say "play back" I mean hitting the spacebar and playing it, not rendering it. This feature worked like a charm in CS5.5, but the quality is very low in CS6. The same thing happens when scrubbing with the play head--the image quality gets all blocky and pixelly looking. The funny thing is, when I stop playback or stop scrubbing through frames, the images go back to thier normal state.
When I first saw this happen, it reminded me of a low quality RAM preview in After Effects (for those of you who are familiar with After Effects)--which I thought would make sense, since AE offers a way to increase or descrease the quality of immediate playbacks (RAM Previews) depending on what you are testing in the playback and how much available RAM you have. But there is no way to adjust the playback quality in PS CS6--at least not one that I can find. I absoluately need playback to be 100% quality as it was in 5.5, otherwise this feature is completely useless to me.
Also--did they remove the "onion skinning" button from the Timeline window? That was so useful... That is such a useful button for anyone attempting traditional animation in this program--which it was wonderful for in CS5.5.
BTW--my current machine specs if that matters:
Mac Mini, 2009 model
2.26 Ghz Intel Core 2 Duo 64 bit
NVIDIA GeForce 9400 256MB
OSX Lion
4 GB RAM
100+ GB free HD space
After rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies View RelatedI was watching through footage and choose a handful of clips ... my video worked fine. Then Friday I came back to start putting everything together and the clips "went blank," The audio could be heard and played back in real time, but the video displays as a black screen or a green screen. I tried rendering, but it said it would take 2+ hours to render the 1 minute of clips I had in my timeline. Even the sections that did end up rendering just showed a blank red screen. Clips are .MTS (which I've used in every project previously with no problem) shot with a Panaconic HMC-150.
I'm using Adobe Premiere Pro CS6 on Windows 8, 64-bit operating system
Processor: Intel Core i7 CPU - 920 @ 2.67 GHz
12.0 GB of RAM
The thing that gets me is that this has worked for months, even worked with these clips a few days ago, and now it seems like everything just vanished.
Mid-job (and of course now that I need to color correct), PP CC has stopped exporting video to my external monitor. I have tried trashing prefs (holding Shift+Opt at start-up) and it doesn't do the trick. In looking around, I've noticed people having this problem when using some BlackMagic cards, but my monitor is plugged directly into the Thunderbolt connector of my MacBook Pro. I've enclosed my Playback settings.
Oddly enough, when I fire up my old copy of PP CS6 it plays back to my external monitor just fine.
I've had had enough late-night edits that I may have inadvertently initiated some keystroke that changed a setting, but I can't think of what that would be or why a Preference Trash wouldn't reset it.
Using Premiere cs6.Audio keeps dropping out during playback. Audio is present in the export.The audio drops out at random and drops back in at random.
I have tried everything from converting my wav to an mp3/aiff, moving my cache and preview files (and changing my scratch locations) to my computer from my external hard drive, creating a new project, deleting the pek files, even closing all apps.
This is something that just started happening out of nowhere in the middle of a project and has gotten worse and worse with use.
No playback in timeline or viewers for most projects. Task Manager shows that PrPro CC is doing something, but no visible effect. Scrubbing works, but no audio. Happens mostly on single-track sequences 1920x1080 and larger. My system: (PC) hexacore 3.34 GHZ (12 CPUs), 32 GB Ram, RAID-0, GTX 770 Adobe certified graphics. Worked great before. A bug in the last update (02-19-2014)?
View 17 Replies View RelatedI have a friend who is just completing a film for a public screening...(about 400 people, mostly volunteers involved in production.)He will be using a regular projector hooked up to a PC to play the video.The source footage is 1080p HD shot on a HVX200. Edited on Premiere Pro CS5.
What format should he use to export so he gets great quality but it can also play without the computer stuttering and dying etc? We've debated between H.264 (mpeg 4 file format) or DVD Blu Ray.MPEG 2 (or some Quicktime format?)
Do we choose h.264 and bump up the bitrate to maximum? Stick with the preset recommendation? There also is h.'264 bluray'..have no idea what difference that makes.
We're not experts on codecs and resolutions etc.Premiere Pro presents this plethora of options.
We want to choose....File ...Export....a format and preset (and maybe adjust a setting or two) and get the best result.
I have encountered this problem on all recent Premiere projects I've worked on with a variety of audio types. My audio is cutting in and out in a seemlingly random way while the video keeps running fine. Sometimes the audio will play fine for 15 seconds then stop, sometimes it stops and starts after about 2 seconds. I have tried adjusting all of my preferences, settings, audio types, and even video types but the problem always comes back. Spoke to a friend who's new to Premiere and he's having the same problem. Considering moving back to FCP despite the weak interface.
Currently I am editing Canon 5d Mkii footage at 1080p, 29.97 fps. I am using none of the audio attached to the video clips - only editing to a separate m4a music track. My audio is at 44100 Hz. I am playing back video at 1/4 quality. I am running a fully updated Mac Powerbook with a 2.6GHz Intel Core i5 and 8gb of RAM.
When capturing HDV clip with Premier Pro CC and playing it in the timeline, the video stutters. I play the same captured clip in Windows Media Player, and it look great. I am using Adobe Premiere Pro CC.-Version 7.2.1(4)
I have the following equipment:
Camera
Canon XH-A1S (set to HDV 60i)
Processor:
Intel® Core™ i7-4930K CPU @ 3.40GHz
Memory:
32 GB
System Type:
64-bit Operating System
Rating:
7.8 Windows Experience Index
Graphics Card
GeForce GTX 760
Solid State Drive
Samsung SSD 840 EVO 750G SCSI Disk Device
Resolution
1920x1200, 59Hz
BD-RW
Pioneer BDR-208D ATA Device
Monitor
Dell U2412M
Clip properties:
Type: MPEG Movie
File Size: 1.1 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;06;04;06
Pixel Aspect Ratio: 1.3333
I have two recent model 27" iMacs running CC. On one system, playback freezes or I getting a Media Pending screen when playing AVCHD (.mts) footage. The second system can playback all the footage with no probplem.
The troubled system specs are: iMac 27-inch, Mid 2011
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 1024 MB
Software OS X 10.9.1 (13B42)
I am using a Lumix GH3 camera and recording in .mov at 50fps progressive and 50mbps. My computer is a macbook pro two years old with 2.2ghz intel core i7 and 8gb of ram (1333 MHz DDR3).
The footage plays fine in the editing suite until I add an effect then the playback is extremely slow and jerky even after render. I am new to PPCC and I've just moved from FCP 7 as it didn't recognise the footage at all.
I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
This is incredibly frustrating have to export out a video just to be able to watch it through.
When editing a multicamera sequence, I keep running into this weird phenomenon where I can't stop the playback. I hit the space bar, start making cuts, then when I want to stop I hit the space bar again and nothing happens. The sequence keeps playing, sometimes stopping after a couple a minute or so, sometimes not until the end of the sequence.
The nested multi-cam sequence has just 4 streams of DSLR video. The machine I'm using has plenty of CPU power and memory and an nVidia GPU, so I'd be surprised if resources are a problem. The source media is on a Raid-0 array.
I've tried switching the resolution to 1/4, but this makes no difference. I have several layers of audio but have solo'ed just one to see if that would work. No.
I just upgraded to Premiere Pro CC and Speedgrade CC specifically to use the Dynamic Link btween these two programs. Exporting from Premiere to Speedgrade works great, but upon returning to Premiere, none of the clips that have the Lumetri effect added will play. The timeline and the audio play, but the video remains frozen on the last effect-free shot.
I noticed that Premiere can play the preloaded Lumetri Looks, but whenever I try to apply the Lumetri effect that recalls a saved look, again it freezes.
I have a nVidia Quadro 200 GPU, and I even updated to the latest driver hoping that would solve something, but no go.
ever since I updated to the newest version of quicktime, any file using the Quicktime animation codec stutters and freezes on playback.
This has happened before, and rolling back to previous versions worked then, but isn't working now.
I've gone far enough as to format the computer and reinstall everything, but the problem still occurs. Every other codec seems to work fine. I can work around it by using other export methods, but it's a problem when I need to edit previous or co-workers projects on my machine.
Here are my specs:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_rtm.101119-1850)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z87X-UD3H
BIOS: BIOS Date: 05/16/13 21:47:33 Ver: 04.06.05
Processor: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
Memory: 32768MB RAM
Available OS Memory: 32656MB RAM
Page File: 4053MB used, 61256MB available
Windows Dir: C:Windows
[code]....
Here's an example of how the image is now being displayed:
A few months back, I spent a bucket of gold on upgrading to a new high end computer.
The specs:
Windows 8.1
i7-4770k 3.50GHz
32gb RAM
GeForce GTX 780
SSD Harddrive as main
2 extra harddrives
None of them are in RAID though.
But here's my problem. In the beginning, editing in After Effects CC and Premiere CC was smooth as butter.However, lately, especially Premiere has started giving me issues.
At the moment, I'm editing to 1080p footage, in h.264 format. There's a few effects on it, such as an overlay 720p footage, using Red Giant Looks twice (on one adjustment layer, and on the footage itself), and some other minor stuff like curves and such.
The effects don't seem to matter much though. Even if I play back the footage with no effects at all, playback is still choppy.
I have playback set to 25% size, and 1/4 resolution, and I still only get what I would guess is around 5-10 frames per second. Sometimes it drops completely, down to just 1 or 2 frames per second. Heck, at times it just doesn't update at all for a few seconds.
When I check my CPU usage, everything is fine. It hasn't reached max at all. RAM is still PLENTY (usually around 20gb left), and it seems that both harddrives (Premiere is running on the SSD and the files used are on another harddrive) aren't maxed out either in capacity.
This isn't JUST Premiere, as I said, I've seen a decline in After Effects performance as well.
I've attached 3 screenshots, of my CPU usages, and the 2 harddrives, showing a few minutes playback in Premiere.
CPU Usage:
SSD drive:
Secondary drive:
As you can see, apart from a few spikes here and there, none of them seem to be having issues with capping out. RAM is sitting at a steady 30% usage.
I'm new to Premiere Pro CS6,I thought I had a pretty powerful computer all things considered. Basically, what's happening is the moment I put any sort of basic video effects on a clip, (e.g. "brightness & contrast" or "fast color corrector") the video playback (but not the audio) becomes extremely choppy and laggy. Playback and overall performance are excellent before I put effects on. It's just the moment I put some on it slows down tremendously.
View 2 Replies View RelatedI rendered the video previews on the timeline (5 video timelines) The length of the timeline is 1 hr 20 min. The first 37 minutes playsback fine but from that point on, the edited video flickers showings video from the footage on each stacked timeline. I restarted computer hoping that would take care of the problem but did not.
View 2 Replies View Relatedi have a black magic declink studio on my hp workstation Z600 and im working on a premiere cs project and wanted to watch on a external monitor , when going to preferences playback setting black magic isn't appearing as an option but in audio hardware it is!!
View 3 Replies View RelatedWhen I import anything into Premiere, the audio quality gets noticably muffled. I have tried exporting at the highest quality settings, but I don't think that's the problem becuase it sounds muffled in the playback in Premiere itself.
View 1 Replies View RelatedAny MPEG2 i render in Premiere Pro CC exports in low quality (Grainy and flickers). Even at 1080p and a CBR of 20. I thought i'd wait for the next update for premiere pro CC which came out today with no luck.
[URL]
24GB of RAM
i7 X990 Processor
NVIDIA Quardro 4000
Windows 8.1
I have the following equipment:
Canon HDV XH-A1S
When capturing HDV clip with Premier Pro CC and playing it in the timeline, the video plays very choppy (bounces) and vertical lines flicker (drapes, edges if doors, etc...). It also seems like it is playing too fast (?). I play the exact same captured clip in Windows Media Player, and it look great.
My Canon was set at HDV 60i
clip properties:
Type: MPEG Movie
File Size: 1.1 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;06;04;06
Pixel Aspect Ratio: 1.3333
Using a Macbook Pro, 2.6 GHz i7 8MB RAM
1) Importing 1920 x 1440 GoPro footage, .mp4, 29.97 fps : What sequence settings do I need for this media? I can't find any presets that match it. So I just pick a 1440 x 1080 sequence. What should I be doing?
2) Exporting Media quality is very poor and pixelated. I am just importing a video into a sequence and exporting about 10 seconds at a time with different export settings: H.264/Match Source, Quicktime, H.264-Blu ray with different presets. And I'm checking "USe max render quality". Every time it renders very pixelated.