VideoStudio :: Can't Save BD Submenu From Template
Nov 4, 2011
I use VS Pro X4 Ultimate with SP1 on a new installed Windows 7 Pro 64bit system. I try to create a BD menu with submenu, but I can't save my changes in the submenu. I understand from a other topic, that I must use a template and save these changes under my Favourites Gallery. I do the steps like in the topic below, but I never get button “Add to menu template” to save it. Where is this button?
"By Customize you are changing the template, after which the “Add to menu template” will become available, now you can save the template, which will show in the Favourites gallery.
1 / First page, choose a template
2 / The screen shows the Main Menu (the Title Menu) as “Currently Displayed Menu”
3 / Double click the text on screen to change to your own.
4 / If you have created “Chapters” choose the drop-down box Main Menu and change to Untitled
5 / You are now viewing the Chapter Menu
6 / again double click the text to modify / change
7 / Selecting the Edit Tab will allow you to add background music and video/images.
Then customise the font types, size and colour etc.You can customise the Motion Menu and also select other Buttons.Again once "customised" you can save the template to the Favourites Gallery"
View 14 Replies
ADVERTISEMENT
Dec 8, 2012
I just spent 20-minutes going through 17-chapter thumbnails settings for a DVD menu of this project only to find none of the changes are saving. I tried repeatedly and the chapter thumbnails always revert to the original values for ALL sub-menus. Does seem to save the main menu thumbnail.
All I do is right-click, select to set the thumbnail, find the place and it works. Just doesn't save when I click to CLOSE the DVD process and come back in, eventhough it says "Saving project"
15.1.0.34 so I think I have all outstanding patches. When I go through the internal process to "check for updates, it says I am up-to-date.
View 13 Replies
View Related
May 21, 2008
When selecting a tab in the tabpalette for "repeating" ("repeat tab" in submenu on the right of the palette) Illustrator (CS3) simply puts tabs all over the place (not repeating the original tab you selected - unlike INDESIGN which does it right!).
View 3 Replies
View Related
Feb 3, 2011
Why submenu links are treated as popups by Google (Toolbar) when configured to open as a blank page (_blank). This only happens in Internet Explorer (8and 9) but not in FireFox. Disable Popup blocker in Tools and the links open as a blank page. Disable the whole toolbar and it works. Google Chrome does not treat it as popups. Here is a sample site: (The submenus are under "Real Estate Displays") [URL]...Most surfer don't know what's happening with the blocked pupups, especially if the have popup blocker disabled already in IE. The problem can be circumvented by choosing Same Window (_top) but that's not what I would like. Here is the code section in the index.htm file:
xr_startSubmenu('xr_links_b1','xr_links_menu1',146 );
xr_submenuItem("Private Display","private/index.htm","_blank","xr_links_plain1");
xr_submenuItem("Commercial Display","commercial/index.htm","_blank","xr_links_plain1");
xr_endSubmenu('xr_links_b1');
//]]></script>
<noscript><div style="position:absolute;">
<a href="private/index.htm" target="_blank">Private Display</a> <a href="commercial/index.htm" target="_blank">Commercial Display</a>
</div></noscript>
I know it has not much to do with Xara.
View 1 Replies
View Related
Nov 15, 2013
Just updated to CC and now when I try to save over old templates it gives me an error message saying it cannot save because this template may be in use in another program...but the only program its in use in is illustrator at that moment because im making changes to it.
View 1 Replies
View Related
Jul 2, 2013
Why can't I save an icc profile to a template?
View 1 Replies
View Related
Mar 22, 2011
I have a working document, part of which should become a template for similar docs.
However the part that should become a template is not all that is in the document.
I guess I can turn off the eyeball of all layers or objects not meant to be part of the template but then the template will have all the extra junk in it (turned off).
Is there a better way than saving a copy of the doc, opening it and deleting all that is not meant to be template, then resave as template?
View 1 Replies
View Related
Jul 14, 2011
Current development env: AutoCAD 2012, VS 2010, ObjectARX.Net (2012)
My target: in AutoCAD pops a dialog, select filename (related to our internal projects) string, then it will create a DWG file from a template DWT file. Then some operation like insert elements into the DWG file and then SAVE (with the filename assigned).
Here is the code I currently implemented:
class DWGWritter
{
const string TemplateFile = @"C: empMyTemplate.dwt";
[Code]....
Well it doesn't work on either of #1-4
#1 give out "eFileInternalErr" exception, which I found the answer - you can't call save() if it's open from exist file
#2 works ... but it just save the contents we write to the database but won't save template file contents, ie. we have put in layers inside the template file but they doesn't save to the new file
#3 give out "drawing is busy" error, no clue why it's "busy" ...
#4 give out same error as #3
View 3 Replies
View Related
Mar 22, 2011
I'm plodding along with my template at work when time allows! I have just saved an initial copy as a dwt file. When I open it none of the layers I made are saved except the ones used. How do you save a layer to a dwt template file, as I need the same colors / line weights each time.
Also when I open my dwt file I have the tabs -
model, layout 1, layout 2, A2
I just want the model and A2 tab, so why do the others open as I have not made them. I have attached a dwg of the initial template for your reference.
Drawing1.dwg
View 5 Replies
View Related
Apr 20, 2012
Whenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
View 9 Replies
View Related
Jul 26, 2013
I have adjusted my North Elevation (using View Graphics) exactly the way I’d like it to look in elevation, and would now like to apply those same visibility adjustments to my other elevations. Is there a way I can save that view as a template and apply to other elevations, or do I instead need to create a view template, make all the adjustments to that template, then apply the template to the elevations?
View 3 Replies
View Related
Feb 14, 2013
I'm trying to automate the drawing-creation in our company. Steps I've taken:
- create new drawingdocument with template
- Save new drawingdocument
Problem: Creation of new document works, but the next step, saving it to a specific location, fails. Error handler is initiated and displays error: Invalid procedure call or argument.
Used
Dim DXF_DWG as DrawingDocument'Create new drawing based on templateSet DXF_DWG = ThisApplication.Documents.Add(DocumentTypeEnum.kDrawingDocumentObject, ThisApplication.FileOptions.TemplatesPath & "Folded and Flatpattern DXF.dwg", True)
'Save new drawing to specific locationCall DXF_DWG.SaveAs("C:TempTest.dwg", False)
As told, the VB-code raises an error on the last command. What am I doing wrong? What are the correct steps in VBA to create a new drawing document based on a template and save the newly created drawing to a desired location?
View 4 Replies
View Related
Jun 17, 2013
I need a 854x480 or a 856x480 template. I make a long videos and I don't like to upload a long HD video unless it's a gaming video. I use .mp4 format to render my videos.
View 1 Replies
View Related
Oct 26, 2012
I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
View 4 Replies
View Related
Mar 6, 2013
I want to change some values in the default drawing template.
But doesnt succed to save it to an existing template
Like this picture shows about the precision
I have tried to use "Save Copy As Template" but the values goes back to the default settings
how to save dimension style settings to an template?
View 2 Replies
View Related
Jun 14, 2011
I made a new template for creating a 30Mb/s "one keyframe/frame" MOV output content which worked well when set via custom settings. When I wanted to use my template in the "create video file" prompt, my VSX3 "needed to stop" ...and I was asked to send the .DMP file to Corel tech support. VS restarted OK, but once I selected "create video file", same story: stop.
Trying to delete form the movie template manager, same story: stop. Changing the settings to lower performance MOV in the temlate manager worked, but still same result when trying"create video file". Couldn't wait for the Corel support. Full reinstall solved the problem.
View 3 Replies
View Related
Oct 10, 2013
In one the former VS (from Ulead times) there was a rustical opening book template. The book with brown or red cover opens and the pages could be edited ( i have it on my earlier videos ) . I am unable to find this template on my computers and there is nothing similar in the VS X6.
View 6 Replies
View Related
Jun 20, 2012
I'm using the HQ 4:3 template in VS11+ but noticed it's defaulting to frame based. My clips are mpeg's BFF. Shouldn't this template be switched to bottom field first?
View 2 Replies
View Related
Nov 9, 2010
I am struggling to make a custom movie template for sharing to a video file. I use the menu Setting, Make Movie Template Manager.What I want to make is:
- Compression: H.264
- Resolution: 800 x 480
- Audio: AAC Stereo
- Video bitrate: 1500
- Container: MPEG-4
But it seems I cannot use this X3 software for that. Especially the resolution, why the "custom" resolution is greyed out (disabled)?The reason for the above movie template is for playing on Android mobile phone.
View 8 Replies
View Related
Jul 7, 2013
I'm creating a Blu Ray disc on VSP Ultimate x6 and deleted the four Blu Ray Templates under Disc Template Manager.
Not a problem you may say, as they can be made again, renamed and saved. However, the Video Data Rate is greyed out and is always CONSTANT.
Meanwhile, as I render my project to a Blu Ray clip in preparation, the Video Data Rate is always VARIABLE. Now, I can set the amount to say, 20,000 kbps in both but
1/ How can I change the Variable/Constant part?
2/ If I can't, will it re-render these clips just because first render is variable and the Blu Ray disc creation instructs constant?
View 1 Replies
View Related
Feb 14, 2014
How do I write a javascript code to open InDesign template, import XML, save and export to pdf?
writing the javascript code to open the InDesign file, import some xml that will be randomly coming in and then saving the document.
View 1 Replies
View Related
Nov 5, 2013
I have download the offical template 075 -080 HD-project template and like it so much. But I am having problem changing some of the picture to portrait so as to fit my pictures. I have try two ways of changing it
1. Directly replacing the picture with my portrait picture but black strips on are both sides.
2. Adding new portrait pictures to the project and copying the attribute (less the size ) over to my picture but the attributes does not fix properly to the pictures. The picture change to a tiny small picture.
Why when I add picture to the timeline on the track it always go to the end of the timeline and I have to move them back to the specific timeline. How to to quickly change the pictures from landscape to portrait and how to add pics to timeline without pics moving to the end of the line.
View 8 Replies
View Related
Sep 6, 2012
On a particular project, when I go to 'SHARE' CREATE DISC' DVD' NEXT' I am unable to change the Menu template. An error message box tells me 'Failed to change menu template'
Program then hangs, if I try to close, I get another error message 'The program has encountered an unspecified error, Contact Corel technical support and send the dump file for analysis' The message goes on to specify an address for the dump file which I can not find.
Other projects work normally, I am able to change menu templates and create DVD discs.
Even with the offending project, I am able to create a Video file without problem.
View 11 Replies
View Related
May 30, 2013
I am trying to do 2-pass encoding on 640 x 480 Mjpeg.avi 30 fps clips using the free x264vfw codec. The first pass works ok. But when I change the codec config to Multi-pass, I get an error message when I click ok to save it.
View 1 Replies
View Related
Mar 4, 2013
I have been using the nine chapter thumbnail DVD menu template. I saw that the start position for each thumbnail could be manually adjusted. So, taking some time, I adjusted each of the nine thumbnails to a suitable frame of the corresponding clip. It worked fine as long as I burned the DVD immediately afterwards. However, if I closed the menu dialogue, all clips reverted to frame 1.
Surely the positions should be saved as are all of the other edits one does to a menu. Not only was this frustrating, it means that one cannot go back and easily burn another DVD from the same project.
View 4 Replies
View Related
Jul 26, 2012
user of Corel Videostudio pro x5 and gradually getting to grips with the functionality, however I have come to a dead end on one issue. I have edited a video ready for sharing and have gone to create a disc with a menu. I did not want any of the existing menu template so managed to create my own using a photograph as background and adding text I have managed to edit the text to change font etc but when it comes to the navigation buttons I cannot seem to be able to edit the properties. When using customise I can choose the different styles of button but cannot change the colour of the buttons to suit my template colour scheme. For some reason whenever I run a preview the play button always turns out to be pale blue colour. Currently on the create disc function I am selecting DVD for testing purposes instead of burning expensive Blue Ray discs however when finished I will want to burn blue ray discs.
View 5 Replies
View Related
Aug 22, 2012
VSX5 .I click on the text, the size handles show, I right click the text to raise the font attributes box, I change the colour in the box + click OK. What exactly do I have to do next because the text colour has not changed and I cant find out how to do this…
View 3 Replies
View Related
Oct 28, 2013
I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
View 9 Replies
View Related
Jul 2, 2012
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
View 2 Replies
View Related
Jan 23, 2012
Converting a default part template to a custom template?
View 1 Replies
View Related
Jun 9, 2011
Can you import layers from a template to a drawing with a different template
View 3 Replies
View Related
