VideoStudio :: Pro X5 - Submenu Thumbnails Not Saving
Dec 8, 2012
I just spent 20-minutes going through 17-chapter thumbnails settings for a DVD menu of this project only to find none of the changes are saving. I tried repeatedly and the chapter thumbnails always revert to the original values for ALL sub-menus. Does seem to save the main menu thumbnail.
All I do is right-click, select to set the thumbnail, find the place and it works. Just doesn't save when I click to CLOSE the DVD process and come back in, eventhough it says "Saving project"
15.1.0.34 so I think I have all outstanding patches. When I go through the internal process to "check for updates, it says I am up-to-date.
View 13 Replies
ADVERTISEMENT
Nov 4, 2011
I use VS Pro X4 Ultimate with SP1 on a new installed Windows 7 Pro 64bit system. I try to create a BD menu with submenu, but I can't save my changes in the submenu. I understand from a other topic, that I must use a template and save these changes under my Favourites Gallery. I do the steps like in the topic below, but I never get button “Add to menu template” to save it. Where is this button?
"By Customize you are changing the template, after which the “Add to menu template” will become available, now you can save the template, which will show in the Favourites gallery.
1 / First page, choose a template
2 / The screen shows the Main Menu (the Title Menu) as “Currently Displayed Menu”
3 / Double click the text on screen to change to your own.
4 / If you have created “Chapters” choose the drop-down box Main Menu and change to Untitled
5 / You are now viewing the Chapter Menu
6 / again double click the text to modify / change
7 / Selecting the Edit Tab will allow you to add background music and video/images.
Then customise the font types, size and colour etc.You can customise the Motion Menu and also select other Buttons.Again once "customised" you can save the template to the Favourites Gallery"
View 14 Replies
View Related
Jan 1, 2013
Recently, when I save PhotoShop 5 photo files, they no longer create image thumbnails, just pixelated squares. Is there an adjustment to correct this? I am running CS5 on an iMac with OS 10.75.
I am creating photo files from scanned b&w negatives layered with colored scans of aged papers and saving them as tif files for printing.
View 4 Replies
View Related
May 21, 2008
When selecting a tab in the tabpalette for "repeating" ("repeat tab" in submenu on the right of the palette) Illustrator (CS3) simply puts tabs all over the place (not repeating the original tab you selected - unlike INDESIGN which does it right!).
View 3 Replies
View Related
Feb 3, 2011
Why submenu links are treated as popups by Google (Toolbar) when configured to open as a blank page (_blank). This only happens in Internet Explorer (8and 9) but not in FireFox. Disable Popup blocker in Tools and the links open as a blank page. Disable the whole toolbar and it works. Google Chrome does not treat it as popups. Here is a sample site: (The submenus are under "Real Estate Displays") [URL]...Most surfer don't know what's happening with the blocked pupups, especially if the have popup blocker disabled already in IE. The problem can be circumvented by choosing Same Window (_top) but that's not what I would like. Here is the code section in the index.htm file:
xr_startSubmenu('xr_links_b1','xr_links_menu1',146 );
xr_submenuItem("Private Display","private/index.htm","_blank","xr_links_plain1");
xr_submenuItem("Commercial Display","commercial/index.htm","_blank","xr_links_plain1");
xr_endSubmenu('xr_links_b1');
//]]></script>
<noscript><div style="position:absolute;">
<a href="private/index.htm" target="_blank">Private Display</a> <a href="commercial/index.htm" target="_blank">Commercial Display</a>
</div></noscript>
I know it has not much to do with Xara.
View 1 Replies
View Related
Jun 11, 2012
I can't put video thumbnails into the library. I had deleted previous projects from the library and now the library won't accept anything - even new captures. I can add titles-just not anything into "samples".
View 2 Replies
View Related
Apr 24, 2011
Does the AVCHD standard allow for thumbnails, so that when a disc is authored and then inserted into, say a PS3, it will show a thumbnail like a BluRay does?
View 1 Replies
View Related
Jan 28, 2011
How to delete thumbnails from the libraries.When I right click on the thumbnail, DELETE is greyed out, when I select the thumbnail and hit DELETE on the key board, also does not work. Just recently upgraded to X3.
View 5 Replies
View Related
Mar 24, 2013
I've been looking for a solution casually for about a year to this, maybe I'm just stupid! When I import all my videos from my camera and put them into appropriate folders they make thumbnails for the files. Unfortunetely when I close down my computer and come back, they have disppeared. This is a pain because, it makes a large amount of files easy to work with as you have some idea what's contained from a thumbnail! Now initially I just thought it was my computers age (not that old) but I have a Dell XPS i7 Laptop also and it's the same story!
I shoot high quality 1080i .mts files so I'm sure they are a resource suck! Is it because the computer doesn't have the power in the RAM to remember all these files? I would of thought, once a thumbnail is made it's just like a JPEG and not changing ever in real time? Is there something I've turned off on my computer, telling it not to remember thumbnails?
View 14 Replies
View Related
Mar 27, 2013
I'm going back to a project that has been dormant for almost a year. My project files are fine, but when I load them there are no thumbnails any more, just the default thumbnail library.
Are there library files associated with my project files I can search for and what kind of file is that?
View 7 Replies
View Related
Nov 23, 2010
How to recover a Title Thumbnail that I mistakenly deleted the thumbnail for?
View 4 Replies
View Related
Jul 23, 2013
I just know I've posted about this before, in years gone by, but I've forgotten something simple. I have VideoStudio ultimatex6, but have an older computer with x5pro. When I load up my avi files, the thumbnails in the library and the edit window show only as black, though the clip name shows beneath the clip. And the clip plays clearly in the preview window that pops up when you ask it to.
I have the program on another computer and this is not a problem. All is fine. What I have assumed is there is a setting somewhere that does this - yet, comparing one to the other, I can't see any difference in the way the units are set under preferences. No doubt, there is some silly little thing causing me to think bad thoughts. So, I want to take the computer - which does have the specs for the program - to the cottage and leave the behemouth home.
View 4 Replies
View Related
May 29, 2013
Why would psd thumbnails all of a sudden start not showing up as thumbnails, just as psd icons?
View 11 Replies
View Related
Aug 29, 2012
New Vs pro x4 user here.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
View 6 Replies
View Related
May 2, 2012
I have VS11+ and I want to save a frame of my project as a still image. The project and footage is
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have clicked on Save as Still Image and the frame appears in the Image folder, although it is square looking with a black border all round. If I put it in the timeline I can make it into 16:9 like the rest of the footage. But where is the image actually saved so that I can use it in other media? How can I decide whether to save it as JPEG or whatever? And why is it in a black box and quite square if it was shot in, and the project is, 16:9? Can I save it as a 16:9 image?
View 3 Replies
View Related
Mar 20, 2011
My Canon HF S21 is set to record at PF25 (i.e 25 fps PROGRESSIVE), and also I choose the highest recording quality : MXP (1920 X 1080, 24 Mbps). When I choose to save the .MTS file here`s what happens :
1. Choosing H.264-MAIN in the Compression tab, the video data rate is limited to 20000 KBps.
2. To have 25 fps (that is, PAL) AND progressive playback, my only choice is to output a file at 1280 X 720. If I choose 1920 X 1080 , AND Frame-based, the Frame Rate drop-down menu becomes greyed out at 30 fps ! Of course, at the Corel VideoStudio tab, I have unticked the "Perform non-sqare pixel rendering", because the source video is made of raster (i.e square) pixels, unlike the HDV 1440 X 1080 recordings.
3. Choosing MPEG-4 HD, the Properties of the video file to be rendered appear as follows :
24bits, 1920 X 1080, 30fps
Frame Based
H.264 Main Profile video, 15000 Kbps
32000 Hz, 16bit, stereo
MPEG AAC Audio, 128Kbps
4. No luck either if I choose Blu ray > PAL H.264 (1920 X1080). The "improvement" appears to be the VBRof 22700 Kbps, but VideoStudio insists on rendering interlaced (Upper Field first) out of my progressive video. The same rendering settings appear if I choose AVCHD > PAL HD-1920. I shall try the Template Manager and see if I can convince VS NOT to alter in any way the quality of the source clip. Meanwhile, I am very interested to read about your experiences with 1080p.
View 6 Replies
View Related
Jun 15, 2013
Quite often I have footage from two cams to create a movie. The cams show pretty different video response characteristics. By adjusting WB, Gamma, Contrast...I can correct and match both footages. Because VS has a not so handy parameter setting UI, it would be fine if I could kind of "smart package" the attributes for a particular camcorder, so I don't have to fill in the attributes for each project with a particalar camcorder footage. Is there a way to get there?
View 2 Replies
View Related
Dec 31, 2011
My Flight Sim Fraps video is in 1920X1200 aspect but saving it in WMV I see it's in 14.9. How do I save in 16.9?
View 5 Replies
View Related
Mar 14, 2011
I was saving a 20GB video that was 3 hours long. It was taking a day to finish and during the night, my computer crashed. I opened VideoStudio and it let me recover the project but I don't know how to resume saving the video. I look in the hard drive and found the video and it said it was 0 minutes long what is says when it was saving it. This means that there should be a way to resume saving it. Is there a way to that?
View 12 Replies
View Related
Mar 28, 2012
How do I get VSX4 stop auto saving a project to its own My Projects folder and save it to My Projects folder in my media hard drive G:What are the pros and cons with these two methods?
View 2 Replies
View Related
Jul 4, 2012
Is there not a way to save the progress of your timeline? So far my workflow has me editing every clip in library mode, then transferring it all down to the timeline so I can insert music, titles, transitions, etc.....and due to the size of my project, I wasn't able to finish before leaving tonight. So I saved everything (or so I thought), but when I opened my project later in VS again, there was nothing in the timeline! (it saved all of my edited files above in the library, but all of my work on titles, overlays and music was lost). Did I do something wrong, or does this program force you make all of those detailed edits and additions in one fell swoop without any chance of saving or taking a break?
View 4 Replies
View Related
Apr 27, 2011
My question: I prefer to shoot my videos in 720p, to optimally match my TV. I see that in VideoStudio, the only 720p option is by using HDV. Is there any other way to get 1280x720 output? I see that AVCHD and Blu-Ray only offers 1980 and 1440 options, both which resize my videos (which I do not want). I'd like to save back as 1280x720 MP4, but VS's MP4 option doesn't provide this.
(Now that I think about it, why does VideoStudio offer 1440 rather than 1280? I thought 1920x1080 and 1280x720 were the common HD formats.)
View 2 Replies
View Related
Aug 26, 2011
I am new to Corel VS having previously used Power Producer/Director and TMPGEncAuthoring software. Have spent the last week customising various DVD menus for use in music DVD compilations. However, I cannot for the life of me work out how to save a customised menu for use in the next and following projects. Have seen the posting "VS PRO X4 fails to save DVD Menu Changes" but it seems to stop short on re-use. Have also ordered the publication "Picture Yourself Creative Corel VideoStudio Pro X4" which arrive next week.
View 5 Replies
View Related
Jan 18, 2013
I am making a slideshow using Video Studio X4 and want to change and save the color in the transition from one picture to the next. I can change the color but have not figured out how to save it and possibly make the new color the default.
View 3 Replies
View Related
Oct 19, 2011
My problem is when I use Corel video studio pro x4 and load a high definition video, in a few minutes it will turn off "power saving mode". What is the problem of my computer?
View 8 Replies
View Related
Sep 7, 2011
i saved a bunch of videos with this setting at the normal 29.97fps. now they are saving at 20fps per the properties in the create video file dialogue box.
View 8 Replies
View Related
Jul 12, 2011
With Pro X4 I am unable to view a display on my film during saving to the file.
View 12 Replies
View Related
Sep 29, 2011
I have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
View 3 Replies
View Related
Aug 14, 2011
A way to save modified DVD menu layouts in X4 ? In X3 we could save a DVD menu template after it was modified, but I can't seem to find the same option in X4.
View 1 Replies
View Related
Apr 7, 2013
After trimming a clip I can save it by File - Save trimmed clip. But if I use filter(s) with trimming before, after or no trimming, the File - Save trimmed clip greys out and I could not find any instruction how to save (render) the clip.
View 4 Replies
View Related
Mar 6, 2012
My video is only for keepsakes of family and friends. I use VS X2 to create short movies. Once I create the movie I want to save it in a file of the highest quality given the camera it came out of. Would I get the best quality file by selecting Share-Create Video File- Same as First Video Clip? Once the movie is saved I wanted to delete the original video clips and the then useless .VSP file used to make the movie.
My thinking is that I do not want to keep all the video clips forever. Many of them are just no good. I use the best of what I shoot and put that into a movie. If I take this approach, will I be able to use movies saved as above to create a new production in the future? For example, create a compilation movie of my son in 2nd grade from the many shorter movies I took throughout the year. Would this compilation movie have the same quality as that created from the original video clips from the camera?
This is just a hobby for me and I don’t want to become buried under a mountain of video files that I will never use and eat up storage space on the PC.
View 3 Replies
View Related
