Recently, when I save PhotoShop 5 photo files, they no longer create image thumbnails, just pixelated squares. Is there an adjustment to correct this? I am running CS5 on an iMac with OS 10.75.
I am creating photo files from scanned b&w negatives layered with colored scans of aged papers and saving them as tif files for printing.
I just spent 20-minutes going through 17-chapter thumbnails settings for a DVD menu of this project only to find none of the changes are saving. I tried repeatedly and the chapter thumbnails always revert to the original values for ALL sub-menus. Does seem to save the main menu thumbnail.
All I do is right-click, select to set the thumbnail, find the place and it works. Just doesn't save when I click to CLOSE the DVD process and come back in, eventhough it says "Saving project"
15.1.0.34 so I think I have all outstanding patches. When I go through the internal process to "check for updates, it says I am up-to-date.
I make regular use of a Flash image gallery that requires me to provide small square 50 x 50px thumbnails whatever the shape of the original images. The only solution I have found so far is to first manually sort my original images into landscape and portrait folders and then run a different action on each folder to create the thumbnails.
Is there any way to design an action that would work equally well on both landscape and portrait images?
Why would psd thumbnails all of a sudden start not showing up as thumbnails, just as psd icons?
View 11 Replies View RelatedI have a bunch of patterns I created in "another program" I no longer use, but would like to have the patterns for use in photoshop. Can I open a jpeg of these patterns in PS and save it as a PS pattern?
View 1 Replies View RelatedI have created a design mainly using dingbat fonts in Photoshop CS2 and want to save it (I think as a TIFF) for use in InDesign CS5. I have tried but when I 'place' to TIFF image in InDesign the quality looks terrible . The document has been created as 600dpi, A5 so 21cm x 14.8cm and I have the color set for CMYK.
When I'm saving the file I'm offered TIFF options, including image compression, for which I have chosen JPG and Maximum quality 12, I've attached a screenshot of the TIFF options.
I am having trouble saving my brush stroke as described in the tutorial in the official guide 'creating and saving your own brush stroke' chapter 10.
I can't figure out how to save it?
I am trying to output a project at higher than 30fps and I am failing miserably. My camera can create 1080 mp4 files at 30fps or 720 mp4 files at 30 or 60fps. I want to creat a video using 720 at 60fps (or near to it).
If I load a 60fps clip and play the clip it runs at the original frame rate. If I play the project however, it plays at 25fps. I have tried to change the project properties, but I cannot select anything higher than 25fps in mpg (or 30fps in avi). Likewise, when I create a video file I am stuck at the lower frame rate. Although I am happy with the 1080X30fps clips and projects; it defeats the object of having a faster camera.
When I am working on several drawngs at the same time, I use the Publish command to plot them as a group. However to save the settings as a DSD file for future use, every open file needs to be saved. Why is this? Is there a way to disable that requirement?
There is no reason I can think of besides "by design" for this. The DSD file is only a list of drawings and their plot settings and is not dpendent in any way I can think of, to whether or not one its drawings is open and not saved.
This may sound like a stupid question but I have been doing a bunch of work on different photos over the last few days and every thing has been working fine.
Today I had the program open and was working on a project with the eraser tool and I had to leave to answer the phone. When I left the tool was working fine while I was away from the computer it kicked into sleep mode. When I came back and went to start where I left off the eraser tool would do nothing.
I have since garbaged that whole project, restarted my computer reset all the tools you name it and I can not get that or the paint brush to work.
The eraser tool will make a very fine scratch no matter how I set it.
What happened while I was away from my desk????
I do not have any kids or anyone else that would have messed something up.
Does anyone have any ideas, is it something simple or should I try reloading the program?
I'm getting constant and repeated crashes in OSX Lion 10.7.3 on an i7 iMac w/ PS CS5 v12.1 - Crashes are 100% repeatable.
I don't have to do anything at all other than open the program, and quit. Then = CRASH! (I've searched and read similar reports of this from years ago but this is all current 2012 hardware/software) Crash log here -
[URL]...
Photoshop quit suddenly and now won't open, how can I fix this?
View 1 Replies View RelatedI am currently using the trial version of PS CS3 on a vista machine. (my true copy is on the way) Droplets worked yesterday but suddenly don't work today.
View 1 Replies View RelatedI'm running Photoshop CS3 on Mac version 10.7.5. Every time I open PS I get the error message "adobe updater quit unexpectedly". Once I click out all I see is a white box for "Adobe Web Suite Premium CS3" that is blank. It can only be minimized - not closed. Everything else in PS is greyed out and unusable.
View 2 Replies View RelatedCS6 using Mac OSX 10.8 (And earlier versions) won't allow me to move placed items unless I quit and re-start!
View 1 Replies View Relatedthis function seems to have simply stopped working. I tried it on two images and the wheel spins while it "works," but absolutely nothing happens.
View 4 Replies View RelatedAdobe Service Manager CS5.5 seems to hang after I use Photoshop. Fine with Indesign etc. (even after closing photoshop).
This prevents my iMac from shutting down. How do I switch it off / disable it or repair it in OSX7?
If I try to use the hints, it takes me to the sign in box. When I try to sign in, the program hangs up. I can not cancel or quit the program. I have to use a Force Quit. It appears that I am locked out of some of the features unless I am signed in. Regardless, I would like to use the hints as this program is new to me. I have also tried to sign in by clicking Sign In in the upper tool bar. Same problem.
View 1 Replies View RelatedMy main plug-in will not work with Photoshop CS5 in 64-bit mode. It was working fine for awhile, but now it won't. I took my computer to the Apple store for them to look at it. They said that even though we are telling it to open in 32, the program is ignoring that command and opening in 64 bit, thereby causing my plug-in not to work.
View 1 Replies View RelatedThe Type Tool has suddenly quit functioning. When I try to type with it, it gives me one HUGE vertical line on the screen, and will not adjust the font type size.
how to fix without me going through a total re-install?
Last night, I downloaded an update for Photoshop CS6, Windows 8, 64 bit. The update failed, and I can't get PS to run at all.How can I restore my program?
View 7 Replies View RelatedI've not had a problem during the past 9 months of constant operation.Part of the report indicates the following:
"Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00000000924da000"
which may give a clue. Of course the error report contains a volume of other info too.how to solve and get back to using the application?I'm on a MacBookPro8,2 using OS X 10.7.5.
Updated Windows. Disabled antivirus. Quit all other applications. Error 1935 - an error occured during the installation of assembly component. When the installation process rolls back it deletes the DVD drive as well!!! Seems it is impossible to install this program? No matter whatI do, error 1935 every time.
View 1 Replies View RelatedI having trouble with closing documents and even quitting Photoshop CC. I tried the menu, shortcuts and the close button on the document frame.
Photoshop reacts to the shortcut by marking "file"/"Photoshop" in the menu when i push command+w or commmand+q but nothing happens.
I have to force quit photoshop each time. All other buttons work exept when i try to delete history states in the history panel. Nothing happens when pushing the "delete current state" button.
On my current system and on my previous system smart sharpen runs PAINFULLY slow. It happened in CS3, CS5, and now with CC it often causes the Photoshop to stop responding and I have to force quit.
I currently have:
MacBook Pro Dual 2.5 GHz i7
8 GB 1333 DDR3 Ram
dual SSDs running Raid 0
OS 10.8.4
The rest of Photoshop seems to run OK, it's just Smart Sharpen that bogs down I'm usually working on 16 bit files that have gotten to be around 800MB-1.2GB by the time I get to sharpening.
I installed cs5 and used it without problems. I downloaded a trial version of cs6, and when it expired, I get a message that say cs5 has quit unexpoectedliy everytime I try to open it. I've uninstalled and reinstalled but it still will not open.
View 1 Replies View RelatedIllustrator CS5 15.0.1 keeps crashing on "Quit". It runs fine when using the program and saving my files but when I go to "quit" it, it crashes.CS5 is all up-to-date with the latest updates and the same goes for the MacPro Quad 2.66 Nehalem with 8gigs RAM (Mac OS X 10.6.4).
View 5 Replies View RelatedI have noticed in the last few days that my Lightroom 5 (CC) is failing to quit. I run it on a mac with the latest OS. I have to force quit the program.
View 5 Replies View RelatedI installed Infrastructure Design Suite 2013 on my pc to try, when using 2012.
F1 doesn't work and neither does any of the buttons on the Help ribbon. I haven't uninstalled the 2013 version yet. Was hoping to not have to.
I want to load my DLL, launch the function with a command. After i quit and lauch the same command. (The DLL is already in memory).
(using sessionflags.)
It is possible to keep the variable i have used in the the first launch for use in the second launch ?
The main function is for adding block in a collection (the user select block). The programm quit, so the user can open a another dwg and run the main function for adding another block. (i memorize name, handle, name of file etc..)
Another question : it is possible to create a form in autocad but if the only active document is closed, the form is not closed and visible. ?
All there question is for create a best solution for manage my collection of block.
I just tried to do an xref and the command stops everything. I get no reaction from autocad. What is wrong?
here is an update: The Xref Palette is docked to my left side and when I hover to get it to flip out I click the DWG button in the left hand upper corner. Well nothing happens from there. Now, when I type -xref the command works at the command line. How do I get the palette to work again?