I am having trouble saving my brush stroke as described in the tutorial in the official guide 'creating and saving your own brush stroke' chapter 10.
I can't figure out how to save it?
I was creating a new brush stroke when I tried to save it Corel stopped working it is happening quite often.
View 12 Replies View RelatedI am trying to create an action that includes a brush stroke and for some reason the action will not remember to include the stroke.
View 3 Replies View RelatedIn pervious versions of photoshop you could make a path with the pen tool and press esc to basically deselect the path without closing it. This would also allow you to make multiple paths so that you could keep making lines and then stroke them all at once. This no longer works with photoshop CC. Pressing esc just deselects the path but when you try to start a new path it continues the first one. Is there anyway to get this feature back in CC? It is such a waste of time to stroke individual paths instead of drawing all the lines with the pen tool and stroking them all at once.
View 1 Replies View RelatedIs possible to create personal brushes in Corel X6meaning design a brush stroke for instance to give you like beads or anything else .
View 6 Replies View RelatedIs there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies View RelatedI use PS CS3 in Windows Vista Home Premium.
I am trying to stroke a Path or Selection with an custom brush that I Defined. For some reason the brush wont even leave a mark on a blank image.
I use the pen tool to set the points then right click to select stroke path, select the brush and click ok.
Nothing happens. The blue tube appears so it's processing the command but still nothing happens.
Could the brush settings be to do with this?
I'm using Photoshop CS2.
On Windows Vista
One can stroke a Path with the Brush Tool, Pencil Tool, Burn Tool, etc., which affects pixels of a targeted pixel Layer.
Shapes can have solid colour strokes, gradient strokes and pattern strokes which are part of the Shape definition.
Am I alone in thinking that it would be useful for Shapes to be able to have their stroke defined as a Brush (and possibly other tools) which doesn't change the pixels of another Layer, and instead remains an editable property of the Shape's appearance?
I created a brush and I have created a path. What I want to happen is for the brush to follow the path and keep the angle of the path. What I mean is the brush should stay perpendicular to the path. So that on angles...the brush takes that angle. Does that make sense? Let me explain exactly what I have done. I created a brush that is just a rectangle that is about 1px wide and about 7px tall. I have created a path around some text. I want the brush to follow the path around so that it looks like stitching. But what is happening is on the vertical sides..the brush is staying vertical.
View 5 Replies View RelatedI have used the pen tool, in path mode, to draw a path. When I right click and select "stroke path" and then set it to brush, I am just getting dots at my anchor points, and no solid line over the entire path I drew with the pen.
View 2 Replies View RelatedIn Photoshop CS4 the paint deposited by a brushstroke by a Wacom Intuos3 pen tool intermittently and unpredictably just stops mid-stroke after some while of a continuos stroke. This is a real problem when making simulated watercolor washes because these require a continuos application of paint using a brush with Wet Edges. When the paint just stops and the pen tool is removed from contact and then re-contacted, the paint starts again but now the new brushstroke sits on top of the old stroke and does not merge into it (as you want with a watercolor wash).
No brush controls are set to Fade and in any case the ink-stopping happens well into the continuos stroke - much later than a Fade control would affect it.
I'd be grateful for advice on how to stop this happening, please. Why is the paint flow just stopping? Is this a known problem with CS4?
CS4 is fine in other respects.
System:
Intuos 3 with Grip Pen and latest driver; Vista Ultimate 64 bit; Photshop CS4 64 bit; Q9550 cpu; 8 Gb ram; x2 WD velociraptor hdds; ATI Gigabyte 4850 graphics card with 1 Gb ram and 9.3 driver; Asus Xonar D2X sound card.
Lag occurs primarily on selections and brush strokes after using the pan tool, but these lags were only present when Vista's Aero theme was DISABLED and vista was running the basic theme (something you would otherwise think improved performance) this is however not the case for Photoshop.
Our dilemma is though that we cannot run 3dsmax in Aero mode and as such this fix is essentially useless :(.
Other sources on the web have indicated these problems as being nvidia driver related (my problems occured running a 8800gtx), this is so far unconfirmed by me although i will be testing a highend ati card shortly.
Okay so I've browsed these forums and everybody keeps saying to turn off Align new Objects to pixel grid well I've done that and it still keeps resetting. I've been using a Print document since I am trying to draw illustrations for a children's book but somehow when I choose anything below 1 pt it keeps going back to 1 pt no matter what.
Opened up transform panel too but it's not checked and grayed out so I can not turn on / off again. I am using Adobe Illustrator CS5.
I am using Illustrator CS5 to build a logo that uses brush strokes. The strokes are translucent but I want them to be opaque. The setting for the stroke is 100% opaque. I can't find a way to change this. It seems like a glitch. I've used brush strokes many times before, but have never had this problem.
View 34 Replies View RelatedI'd like to scale a brush stroke. How do I do this?
Left is original stroke Right is resized by pressing shift then pulling box to upper right.
I found on the forum to tick preferences - scale strokes & effects but still not working?
I am new to Illustrator and am taking an Illustrator class. One of the excercises we are supposed to do is just tracing over a greyed-out image that is made up of one long brush stroke. the idea is to start at one end of this long stroke and follow all the curves, not letting up on the mouse button till the end. As the title states, we are using the paintbrush for this.
the brush quits putting out any color, even though I DO NOT let up on the mouse button! have tried and tried with the same result. So picture this...if you stretched this stroke out in a strait line, it might be 20 inches long, but i can only trace 10 inches of it before the paintbrush quits.
I have googled this to no avail. I am on a pc, but it is not just on one machine, as I have tried this on one Windows 8 desktop, a Windows 8 laptop, and a Windows 7 laptop, all using different mice as well. Both laptops have I7 chips with 4gigs of ram, and the desktop has a core 2 quad chip with 8 gigs of ram, so I dont think thats a problem. Just seems weird that its happening on all three machines.
Also, its not the file that Im tracing around either, because I can get the same result if I just open a new document and just start painting a long stroke before too long it quitsThis is happening in Illustrator CC. Class doesnt meet again for a week, so just thought I would ask here.
Why I can’t add a gradient to a brush stroke. As soon as I select the drawn brush stroke and I try playing around with the gradient, the whole stroke goes black…This is driving me nuts. And the weird thing the gradient can be applied only to the basic brush type…not the one that I need unfortunately. I’m not sure why that is…I can only add colour to the brush stroke but no gradient sadly. Is there something I’m doing wrong or a setting which prevents this from happening?
View 3 Replies View RelatedAnyway, I would like to use the Basic brush at half a pixel stroke and less like 0.25
However, when I type in 0.5 and then go to use the brush it just turns back to 1px
So, should I assume I cannot make a stroke smaller than 1px?
Im using a tablet. I want to make my brush stoke very very short. Previously, I would do this by setting the fade to a very small number. I think I used to set it to airbrush but possibly it worked in brush as well. (I cant even figure out how to select an airbrush now) How do I do this in 6?
View 3 Replies View RelatedI have created a brush that is meant to mimic stitching and i would like to be able to rotate one "stitch" or stroke at a time... ( i pasteurized the shape)
I have used Ctrl + Click on the Shapes Thumbnail to make a Selection and then went to Select > Modify > Contract and then I went to the Paths palette and from the drop down/fly out menu i chose Make Work Path and then. I Right Clicked on the Work Paths Thumbnail and chose: Stroke Path > Brush (chose my custom brush)
I manipulated the Path as much as possible to create the curves as needed but. I still need to modify the stitches . If i recall correctly i think i read somewhere that i can use a Marquee tool select individual brush strokes (that are a part of the same path) to rotate and/or relocate/move in general, however, i cannot seem to get it to work for me ... so, i am thinking i've forgotten a step or that i may be totally wrong.
Can i rotate a single brush stroke? is there a way to "ungroup" like in Illustrator or some other sort of Ps creature.
Above is an example of what i'm trying to explain ... all the dashes are on one path but i would like to be able to rotate just one at a time (like in the red circle). is this at all possible? i've tried to paint em all manually but it just doesn't end up looking nice at all.
I just got an Intuos5 and I'm not very experienced with the Photoshop settings regarding tablet usage. I want to replicate the effect of drawing on paper with a marker, without lifting my pen. If you go back and forth over the same spot 15 times on a piece of paper with a marker without (lifting the marker), that spot will be much darker than if you make one stroke. I understand that in Photoshop I can lift my pen off the tablet and do the same stroke 15 times, but logistically, that just doesn't work with the way I draw.
Basically, I'm wondering if there's a way to make it so opacity is purely dependent on how many times a certain spot is covered WITHOUT LIFTING MY PEN.I know there are controls to switch brush opacity to coincide with pen pressure, but I don't want to destroy my new tablet by carving into it to have a pure black stroke.
To demonstrate what I mean by this, here's an extremely crude example in which the left represents how photoshop works for me now, versus how I'd like it to work. Notice how going over the same spot within the same stroke, those intersections are darkened.
got a problem that I can't figure out...
In cs5 i could stroke the path based on the brush size/shape when i choose "brush" and simulate pressure to get those nice faded out lines.
In cs6 I do the same thing but the stroke size never changes to the brush size even when i make sure "brush" is selected.
Second question... I want to add some lights with Knoll Light Factory; is there a way to preview the lens flare on top of all the current layers to see what it will look like? Sometimes i'm trying to position it on top of a very specific area. I know I can change the background layer to the specific place, but getting a full preview would be great.
PS CC Brush flickering to arrow after each stroke. My problem is on Windows 7 Ultimate SP1.
As a computer tech, I have tried the tricks I know, and thought I would get on here and see if/what I am missing.
Im running Photoshop CC 64bit on Windows 7 Ultimate 64bit, updated using 3 monitors between the nvida and on-board intel graphics. I have also Checked that PS is updated as well.Im on a Intel I3 Sandy with an nvida GTX 550 Ti 9.18.13.2049 (6-21-2013) with 8gigs of ram
I am also using a bamboo Capture (It's all I can afford right now) with the latest drivers (5.3.2.1).I have unplugged the capture and was able to reproduce the problem just using the mouse.
I testing and reproduced the problem on PSD's large and small and jpg's as well.I have also disabled and enabled several options in the tablet and windows tablet settings.
I have reproduced the problem using all 3 monitors in full screen and windowed mode.I have been able to reproduce the problem in most of the settings with in PS CC.
A more detail of the problem is:99% of the time, at the end of a stroke (Pen or mouse) make the windows arrow pointer appear instead of the brush. So, Lets say I make several one direction strokes. If the mouse (Pen) keeps moving after the stroke, the windows arrow cursor will blink on screen. If you to the same thing and end the pen/mouse motion with the stroke the arrow cursor icon will appear and stay there until you move the cursor again.
Is there a way so that, when I finish painting a Brush stroke, it automatically becomes selected? Or something else having the same effect?
View 1 Replies View RelatedPS CS2, Win XP
I created a brush representing a period of a tyre tread. I want to stroke path a path with it to make it look like a tire mark: >>>>>>>>>>>>>. My problem is the single brush marks are distributed far too close together.
Where in brush palette or wherever can I make the parameters fit?
Click on the brushes palette up the top right hand side of the menu bar. Click on color dynamics then change the hue, saturation and brightness.
View 1 Replies View RelatedI traced with pen tool a line and now I need it to make it same as this:
I tried to double click to stroke lines to bring stroke options and there are few strokes in library but not exact of this. I tried to play with size and spacing but I cannot reach the same result, how to do it?
I'm using a basic custom brush which reacts to pressure, and whenever I make a brush stroke with my stylus, the line doesn't appear until I lift my pen off the tablet. It's a seemingly random occurence, although it occurs in both my work (CS6 / Win7 / Intuos3) and home (CS6 / Win8 / Intuos4) setups.
View 8 Replies View Related