VideoStudio :: PC Crash Writing DVD In Converting Video Of The Title
Dec 9, 2011
I upgraded to VS X4 SP1 having successfully used its predecessors for many years. However, I now cannot burn a DVD as it fails in the Converting Video of the title (001/001] step.
My clips are captured by firewire from a Sony camcorder in DVI format. In this project I am using transitions, moving menus, 12 chapters and titles extensively.
My workflow is as follows: Share, Create Disc, DVD, Use first clip as introductory video is unchecked (patched dll file for Unknown Error installed), use Smart Scene Menu, Burn. Timeline is 1:26:54:22 so I select Yes to fit to DVD. PC crashes anywhere between 6 and 18 minutes later. Do not convert compliant MPEG files is checked.
I have tried various other things and can successfully burn a video under 30 min on the timeline without and transitions, chapters or menus.
My project properties are Microsoft AVI, PAL 25fps, 24 bits, 720x576, 4:3, Lower Field First, DV Video Encoder - type1
Clip properties are the same with 32000kHz, 12 bit Stereo audio as per attached file.
The converting video of the title step takes up to 30 min to complete for a 20 - 30 minute project, so seems like a proportionally high time of total job.
View 1 Replies
ADVERTISEMENT
May 3, 2013
I've just got an iPhone 4S and shot a test video to edit. However, when I load it and try to create a file, VS10+ crashes every time within a few seconds.
All I'm doing is trying add a few simple titles with the output file being 'same as project settings' so the output should be mpg4, PAL, 720 x 576. This is the first time I've tried editing iPhone video and I've never had this problem with any stuff that I've edited in the past.
View 4 Replies
View Related
Jul 8, 2013
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
View 3 Replies
View Related
Feb 6, 2012
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies
View Related
Jan 12, 2012
1. I did read somewhere else (I can't find it now-by Ron P, I think) that for video editing, the computer must be of quite a high spec.
For the first time, the capture managed to do 70% of the DV tape. But now it wont do it. Is it my PC? (spec provided from Belarc report)
View 7 Replies
View Related
Dec 25, 2010
I am using Ulead VideoStudio and I am trying to add a title before the video start without any success I always get the title over the first few seconds of the video.
View 1 Replies
View Related
Sep 15, 2013
I ended the video on a portrait of him and added a title to appear. However, as the clip proceeds the title disappears at the end of it's bar/clip. How does one get the video to end on the photo with the title in place, or, freeze on the photo and title after the tile appears. The more I extend the title bar, it just takes longer to appear and still disappears at the end.
View 10 Replies
View Related
Jun 8, 2012
I want to render a video that consists of two parts: A small intro (8 sec) and a video (~2min). I want to render it on iPhone 4/iPad HD (720p). Now, after rendering the intro (~9%) the program crashes with the message "Corel VideoStudio Pro X4 doesn't respond..." System Specs in profile.
View 2 Replies
View Related
May 3, 2011
For some reason I can upload an mp4 video files into the Video Studio, but as soon as I want to work with it the program crashes down, announcing an unknown mistake. Is there any way to prevent this?
View 3 Replies
View Related
Dec 18, 2010
I'm trying to add a title to the beginning of my video but when I drag my video clip down to the timeline I can't get it to start after the beginning title. How do I add deadspace to the video timeline so my title text shows at the beginning? I can't figure this out. It seems so simple. I just want text at the beginning and then after 10 seconds I want my home video to start.
View 2 Replies
View Related
Jun 7, 2012
I have been trying to create a short video that will show some video through a title. I have found a Corel Tutorial on how to do this but it seems to be for an earlier version of VS since I do not see some of the screens in X5 that are shown in the tutorial. I am still basically a beginner with some of the VS features so may have easily overlooked the process.
View 3 Replies
View Related
Jun 28, 2011
I am converting some video from VHS tapes starting by copying my VHS tapes to my DVD player/recorder's harddisk. I then intend to copy from the hard disk to DVDs and don't mind copying at the maximum resolution. I will then import those DVD's into VS and edit. What I want to know is what is the maximum bit rate I should use so that I don't loose any resolution (my VHS is bad enough as it is) but also fit as much as possible to a single sided DVD. As the resolution of VHS is nowhere as good as DVD I would have thought that it would be a waste of space to output at say 7500kbs.
View 14 Replies
View Related
Sep 29, 2011
I've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies
View Related
Jul 20, 2012
I've been unable to resolve a problem encountered when I insert a "title" to overlay on the first 30 seconds of a corresponding video clip.
When played back, the subsequent portion of the remaining video clip past 30 seconds goes missing. However, on this "missing portion" the audio portion of the video clip is present while the video portion becomes solid black to the end of the clip. The same result happens when I burn it.
In the "PROJECT" playback mode both the title and the video play fine, as do both the video and title in the "CLIP" mode.
View 4 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Jan 12, 2013
Can I import XMF files into Video Pro X5 without first converting them? I cannot find the answer to this on the sales information. Also is there any way to import those XMF files into my current version (Video Pro X2).
View 9 Replies
View Related
Feb 18, 2013
Is it possible to import a digital video sequence into photoshop and convert it into individual frames, so that each frame can be manipulated individually (drawn into, coloured etc) and then reform the individual frames into a video file for export toAfter Effects, Premier Pro or Avid?
View 3 Replies
View Related
Apr 26, 2012
I removed my nVidia Display drivers in safe mode and reinstalled, the problem persist. I reset my PS settings... same problem.It works only in Photoshop 32bits.
View 4 Replies
View Related
Sep 15, 2011
My evaluation copy of VideoStudio X4 crashes whenever it tries to write an mpeg4 file. I get a message to e-mail the DMP file but thee is no e-mail address given or found on this site.
View 6 Replies
View Related
Jan 21, 2014
Lightroom 5 on OSX 10.9.1 will crash after a few seconds of displaying/selecting items if a video fie is present in that library folder. In Console, I get these messages every second until I force quit Lightroom:
([0x0-0x978978].com.adobe.dynamiclinkmanager.application[3472]) Job appears to have crashed: Abort trap: 6 Saved crash report for dynamiclinkmanager[3472] version 7.0.0 (7.0.0.0) to /Users/[Username]/Library/Logs/DiagnosticReports/dynamiclinkmanager_2 014-01-21-102549_[Computername].crash
Unfortunately I'm not sure if the issue was already present before the 10.9.1 OSX update or with previous versions of Lr.
View 1 Replies
View Related
Nov 15, 2008
I have three monitors connected to two separate graphics cards, an 8800GT and an FX5200 (PCI). Now, this setup works fine in regular XP Pro, with driver 175.19; Photoshop CS4's OpenGL works without a problem save for the brush cursor bug. However, I installed Vista x64 as a dual boot for the RAM boost, and ran into a bit of a wall.
Photoshop now refuses to work at all with the OpenGL enhancements on. It loads (an improvement in itself, used to get stuck at "Reading preferences"), but it'll freeze when I try to open a file or go to the performance settings. I'm currently using driver 171.16; I know it's outdated, but it's the most recent one that works with both cards in Vista x64. I'm also quite sure it's not the problem; Photoshop works perfectly with OpenGL on if I disable the FX5200.
I've tried the registry key AllowOldGPUs_ON to no effect. I've also tried both the 64-bit and 32-bit versions, with no difference. Is it possible to get Photoshop working with both cards, short of replacing the FX5200?
Specs:
Intel Core 2 Quad Q9300 2.50GHz
4GB RAM
Over 300GB HDD space available for scratch disk use
EVGA 8800GT
PNY Verto FX5200
View 22 Replies
View Related
Mar 23, 2011
I'm relatively new when it comes to 3D applications.Basically, I have created a scene of the Earth from space, and have managed to create a relatively good looking still image.
However, for my project I need a full 3D environment map, and so far I have been unable to produce this with the environment map option in the rendering tab. Basically when moving the camera, the background stays exactly the same, but I want the background image to pan aswell - having a fixed image makes no sense when panning around a 3D scene if I'm being clear :/
I tried to use video post, but every time I try to execute the render Max hangs on "Transforming Vertices". It does this on full scenes and totally blank scenes, but so far has only done it when rendering a camera view, not perspective. The only way out of Max is to close it from the task manager when this happens. I searched all day yesterday for a solution to this, but the only thing I could find was to alter the bitmap pager, which 2011 doesn't allow customization of.
So after I gave up on Video Post ever working, I rendered the inside of a tube with a star map. I have problems with the texture looking right when I do this however, it looks stretched, blurred, and the joins between faces are very apparent.how to make an environment map fully wrap around the scene, and pan with the camera.
View 8 Replies
View Related
Aug 11, 2012
I just set up a new rig (specs below) and everything was going great. I added a second monitor and suddenly PS CS6 starts crashing randomly. I think I discovered that PS will not support a dual monitor config if each monitor is on a different video card.
My main monitor (30" dell) is powered by an ATI Raedeon HD 4850. My secondary monitor (HP Elite L2201x) is powered by the on board Intel HD Graphics 4000 because the display only uses Display Port. Both are supported cards and PS runs fine with either one used independently with or without GPU support.
When I have BOTH connected the Graphics Processor Settings box is greyed out and when I mouse over that section the description box below says "Graphics hardware acceleration is unavailable. You will need to upgrade your video driver and possibly your video card" and the programs crashes randomly. The same behavior occurs regardless of on which monitor PS is being displayed.
I have attempted to tweak BIOS settings to establish a hardware priority so PS would only see one card but to no avail. As this issue prevents me from using my second monitor entirely (I use PS daily), I'd really like to get it resolved.
Motherboard: GIGABYTE GA-Z77X-UD3H
Processor: Intel Core i7-3770K CPU
RAM: 32GB
Boot Drive: OCZ 128GB SSD
OS: Win7 64
Video card details: Current drivers on both
Primary: ATI Radeon HD 4850
Secondary: Intel HD Graphics 4000 (HD4000)
View 6 Replies
View Related
Jan 4, 2013
Playing a video will cause Lightroom 4 to crash in Windows 7. It seems to be correlated with several videos open in the grid.
View 4 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Mar 31, 2013
I have a Canon SX30IS. When I use PSE9 to download from memory card, if there are any videos present on the card, the Photo Downloader crashes.
I believe that it is something to do with Apple Quicktime. When I uninstall Quicktime , PSE downloader does not crash while importing media form this camera, but cannot play video clips. On reinstalling Quicktime , the PSE downloader crashes while searching the memory card for media.
I have not upgraded PSE twice now because of this crash. What makes it worse is that Apple Quicktime is a very poor media player, managing about 2FPS on the video clips from this camera when both the Canon and the VLC video codecs can manage 30FPS.
I would much prefer if I could choose to use a video renderer, like using any available Windows codecs rather than insisting on using annoying Apple software.
View 1 Replies
View Related
Feb 22, 2014
I have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies
View Related
Jul 16, 2012
I used this video tutorial to convert a video file to a animated .GIF. As you can see from the gif I made, when the picture resets it lags.
[URL] .....
How do I stop the reset lag?
View 2 Replies
View Related
Aug 20, 2013
I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons. If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Photoshop.exe
Faulting module path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.
View 6 Replies
View Related
Dec 26, 2011
I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
View 2 Replies
View Related
