Lightroom :: V5 Mac Crash With Video?
Jan 21, 2014
Lightroom 5 on OSX 10.9.1 will crash after a few seconds of displaying/selecting items if a video fie is present in that library folder. In Console, I get these messages every second until I force quit Lightroom:
([0x0-0x978978].com.adobe.dynamiclinkmanager.application[3472]) Job appears to have crashed: Abort trap: 6 Saved crash report for dynamiclinkmanager[3472] version 7.0.0 (7.0.0.0) to /Users/[Username]/Library/Logs/DiagnosticReports/dynamiclinkmanager_2 014-01-21-102549_[Computername].crash
Unfortunately I'm not sure if the issue was already present before the 10.9.1 OSX update or with previous versions of Lr.
View 1 Replies
ADVERTISEMENT
Jan 4, 2013
Playing a video will cause Lightroom 4 to crash in Windows 7. It seems to be correlated with several videos open in the grid.
View 4 Replies
View Related
May 3, 2013
I've just got an iPhone 4S and shot a test video to edit. However, when I load it and try to create a file, VS10+ crashes every time within a few seconds.
All I'm doing is trying add a few simple titles with the output file being 'same as project settings' so the output should be mpg4, PAL, 720 x 576. This is the first time I've tried editing iPhone video and I've never had this problem with any stuff that I've edited in the past.
View 4 Replies
View Related
Jul 8, 2013
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
View 3 Replies
View Related
Feb 6, 2012
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies
View Related
Jan 12, 2012
1. I did read somewhere else (I can't find it now-by Ron P, I think) that for video editing, the computer must be of quite a high spec.
For the first time, the capture managed to do 70% of the DV tape. But now it wont do it. Is it my PC? (spec provided from Belarc report)
View 7 Replies
View Related
Nov 15, 2008
I have three monitors connected to two separate graphics cards, an 8800GT and an FX5200 (PCI). Now, this setup works fine in regular XP Pro, with driver 175.19; Photoshop CS4's OpenGL works without a problem save for the brush cursor bug. However, I installed Vista x64 as a dual boot for the RAM boost, and ran into a bit of a wall.
Photoshop now refuses to work at all with the OpenGL enhancements on. It loads (an improvement in itself, used to get stuck at "Reading preferences"), but it'll freeze when I try to open a file or go to the performance settings. I'm currently using driver 171.16; I know it's outdated, but it's the most recent one that works with both cards in Vista x64. I'm also quite sure it's not the problem; Photoshop works perfectly with OpenGL on if I disable the FX5200.
I've tried the registry key AllowOldGPUs_ON to no effect. I've also tried both the 64-bit and 32-bit versions, with no difference. Is it possible to get Photoshop working with both cards, short of replacing the FX5200?
Specs:
Intel Core 2 Quad Q9300 2.50GHz
4GB RAM
Over 300GB HDD space available for scratch disk use
EVGA 8800GT
PNY Verto FX5200
View 22 Replies
View Related
Mar 23, 2011
I'm relatively new when it comes to 3D applications.Basically, I have created a scene of the Earth from space, and have managed to create a relatively good looking still image.
However, for my project I need a full 3D environment map, and so far I have been unable to produce this with the environment map option in the rendering tab. Basically when moving the camera, the background stays exactly the same, but I want the background image to pan aswell - having a fixed image makes no sense when panning around a 3D scene if I'm being clear :/
I tried to use video post, but every time I try to execute the render Max hangs on "Transforming Vertices". It does this on full scenes and totally blank scenes, but so far has only done it when rendering a camera view, not perspective. The only way out of Max is to close it from the task manager when this happens. I searched all day yesterday for a solution to this, but the only thing I could find was to alter the bitmap pager, which 2011 doesn't allow customization of.
So after I gave up on Video Post ever working, I rendered the inside of a tube with a star map. I have problems with the texture looking right when I do this however, it looks stretched, blurred, and the joins between faces are very apparent.how to make an environment map fully wrap around the scene, and pan with the camera.
View 8 Replies
View Related
Aug 11, 2012
I just set up a new rig (specs below) and everything was going great. I added a second monitor and suddenly PS CS6 starts crashing randomly. I think I discovered that PS will not support a dual monitor config if each monitor is on a different video card.
My main monitor (30" dell) is powered by an ATI Raedeon HD 4850. My secondary monitor (HP Elite L2201x) is powered by the on board Intel HD Graphics 4000 because the display only uses Display Port. Both are supported cards and PS runs fine with either one used independently with or without GPU support.
When I have BOTH connected the Graphics Processor Settings box is greyed out and when I mouse over that section the description box below says "Graphics hardware acceleration is unavailable. You will need to upgrade your video driver and possibly your video card" and the programs crashes randomly. The same behavior occurs regardless of on which monitor PS is being displayed.
I have attempted to tweak BIOS settings to establish a hardware priority so PS would only see one card but to no avail. As this issue prevents me from using my second monitor entirely (I use PS daily), I'd really like to get it resolved.
Motherboard: GIGABYTE GA-Z77X-UD3H
Processor: Intel Core i7-3770K CPU
RAM: 32GB
Boot Drive: OCZ 128GB SSD
OS: Win7 64
Video card details: Current drivers on both
Primary: ATI Radeon HD 4850
Secondary: Intel HD Graphics 4000 (HD4000)
View 6 Replies
View Related
Jun 8, 2012
I want to render a video that consists of two parts: A small intro (8 sec) and a video (~2min). I want to render it on iPhone 4/iPad HD (720p). Now, after rendering the intro (~9%) the program crashes with the message "Corel VideoStudio Pro X4 doesn't respond..." System Specs in profile.
View 2 Replies
View Related
Dec 9, 2011
I upgraded to VS X4 SP1 having successfully used its predecessors for many years. However, I now cannot burn a DVD as it fails in the Converting Video of the title (001/001] step.
My clips are captured by firewire from a Sony camcorder in DVI format. In this project I am using transitions, moving menus, 12 chapters and titles extensively.
My workflow is as follows: Share, Create Disc, DVD, Use first clip as introductory video is unchecked (patched dll file for Unknown Error installed), use Smart Scene Menu, Burn. Timeline is 1:26:54:22 so I select Yes to fit to DVD. PC crashes anywhere between 6 and 18 minutes later. Do not convert compliant MPEG files is checked.
I have tried various other things and can successfully burn a video under 30 min on the timeline without and transitions, chapters or menus.
My project properties are Microsoft AVI, PAL 25fps, 24 bits, 720x576, 4:3, Lower Field First, DV Video Encoder - type1
Clip properties are the same with 32000kHz, 12 bit Stereo audio as per attached file.
The converting video of the title step takes up to 30 min to complete for a 20 - 30 minute project, so seems like a proportionally high time of total job.
View 1 Replies
View Related
May 3, 2011
For some reason I can upload an mp4 video files into the Video Studio, but as soon as I want to work with it the program crashes down, announcing an unknown mistake. Is there any way to prevent this?
View 3 Replies
View Related
Sep 29, 2011
I've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies
View Related
Mar 31, 2013
I have a Canon SX30IS. When I use PSE9 to download from memory card, if there are any videos present on the card, the Photo Downloader crashes.
I believe that it is something to do with Apple Quicktime. When I uninstall Quicktime , PSE downloader does not crash while importing media form this camera, but cannot play video clips. On reinstalling Quicktime , the PSE downloader crashes while searching the memory card for media.
I have not upgraded PSE twice now because of this crash. What makes it worse is that Apple Quicktime is a very poor media player, managing about 2FPS on the video clips from this camera when both the Canon and the VLC video codecs can manage 30FPS.
I would much prefer if I could choose to use a video renderer, like using any available Windows codecs rather than insisting on using annoying Apple software.
View 1 Replies
View Related
Aug 20, 2013
I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons. If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Photoshop.exe
Faulting module path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.
View 6 Replies
View Related
Feb 26, 2014
3 days ago, after few miutes of lr usage it crashed. And later, on same day, it crashed often after few minutes of usage. It crashed also with different catalog. Also other applications crashed. Reboot solved for all the apps, but not for lr. Since this first crash, now it crahes very often. From console log, the only error is about segmentation fault: 11.
I have a macbook pro (late 2008) with osx 10.8.4 and lightroom 5.3. No update or new installation from sunday.
View 4 Replies
View Related
Jan 30, 2013
When I click on 'Import' in Lightroom 4.3, the programe stops responding. I have tried restoring the last catalogue backup (15th Jan) but no difference.
View 2 Replies
View Related
Feb 22, 2013
LR 4.3 was working perfectly till today when I attempted to import some images. I successfully imported images yesterday but today when I click the Import button the screen goes gray and lightroom shows 'not responding'. I have rebooted, checked for updates, created a new empty catalog, checked that there are no video files in the source drive, placed all the image files to be imported into temporary folder on the hard drive to avoid problems with card readers, and still have the same issue.
Occasionally the import page does appear but the source column is empty. When I click the Source + the screen goes gray again and no activity appears other than the popup that asks if I want to close the program or wait. The computer is running Win8, 12gbRAM, corei7/6 cores, plenty of drive space (4tb)
View 4 Replies
View Related
Apr 6, 2012
My lightroom 4 instantly crash whenever I opened the import tab. I tried using a new catalog but it also crash.
View 5 Replies
View Related
Nov 16, 2011
I've just reinstalled Win 7 and Lightroom after a crash. Happily I've the photos and LR backups on an external HD. I've copied the photos back to my pictures but am unclear how to reinstate the latest catalogue from the LR backup file.
View 7 Replies
View Related
Oct 6, 2012
I recently updated Lighroom 4.1 to 4.2 successfuly, but now any time I go into the Develop module, Lightroom pauses, then crashes and forces me to quite the program. Is this a bug than needs to be ironed out, or is there something else going on?
View 1 Replies
View Related
Jun 8, 2012
The hard drive on which I kept my LR library recently crashed. I need to import my files to LR from my backup HD. Is there a way to do this without creating duplicates and preserving the LR edits?
View 1 Replies
View Related
Oct 26, 2012
I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding.
View 7 Replies
View Related
Dec 23, 2012
I have installed lightroom 4.3 on my Dell inspiron 1525 running Windows Vista Home Premium with SP2. The moment I try to get to Develop module, Lightroom displays message in a window as "Adobe Photoshop Lightroom has stopped working" and displays the options to check online for a solution or close the program. Is it the operating system or the buggy lightroom ? I did try 4.2 as well with no successful results.
View 11 Replies
View Related
Jun 19, 2012
I'm on the release version LR 4.1
It's typically very stable, but when I enable the Secondary Display, it starts crashing every 10 - 15 mintues.
Win7x64
12GB RAM
ATI Catalyst 12.4 (was the same under 12.1)
Internal 256GB SSD w/ OS and catalogs
External 5.5TB eSata w/ RAW files
Canon 5d2 & 5d3 files
2x Dell U3011 displays
I've googled and searched the forums. Lots comes up about older versions, but I'm not finding anything about the current release version. Windows offers to check for a solution online and close the application.
Crash Info
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.1.0.11
Application Timestamp: 4fb2266f
[Code] .......
View 31 Replies
View Related
Oct 14, 2012
I had a hard drive crash. I had everything backed up on Carbonite. So I've reinstalled Lightroom 4.2 and am a little confused on how to restore everything back to Lightroom with all my metadata and changes etc
I am using Windows 7 and have already restored my files back onto the computer. I've done some research but it makes my head hurt and have seen several different ways to do it . I just want to make sure I don't mess it up.
View 11 Replies
View Related
Apr 10, 2012
After a computer crash, Lightroom 3.6 is showing all my pictures, all cameras (7D, T1i, G12) with an oversaturated orange colours (to fix this I have to reduce red saturation by -15 and increase red hue by +68 ) . I do not see this in CS5 not in Canon's DPP. I could create a new rpofile to revert this issue, I am afraid this will cause issues when I upgrade to newer versions.What can I do to restore my old settings without messing my updates?
View 4 Replies
View Related
Nov 19, 2012
I'm using Win 7, 64-bit on a new PC with 16-GB of RAM and plenty of power. I've been editing 40 and 50 MB DNG files for several months with no difficulty. I recently scanned over 1500 old negatives (on a Plustek 7600i) and then imported these tiffs into LR. Again, there were no problems encountered.
I was editing one of these tiff files (27.68 MB) and eventually started to remove all the dust spots and scratches. At first, all went well. However, when I got up to a few hundred of these spot removals, LR4 slowed to a crawl and eventually crashed. The slowdown and crash only occurred whenever I attempted to open this particular tiff and activate the spot removal tool. All other photos opened and edited without problems.
I then tired the same spot removal on a different tiff from my scanned bunch, and encountered the same kind of slowdown and eventual crash of LR.
View 7 Replies
View Related
Mar 12, 2012
I use window 7 64 bit so Lightroom installer install the 64 bit version for me. Everytime I click on the import button lightroom 4 would crash. I have try to create another catalogue, same problem.
View 17 Replies
View Related
Sep 5, 2012
I restored my catalog after my hard drive crashed but now LR will not open the images in PS for me to edit.
View 2 Replies
View Related
Nov 6, 2011
After ugrading to LR 3.5 I have not be able to print an image. Each time I move to the Print Module the systems crashes with the error message "Adobe Light Room has stopped working". My viedeo card is an ATI Radeon HD 5570 and I have no problems printing from any other program including Qimage. Windows 7 64bit updater shows all updated to the OS have been made. All the other functions in LR are working normally. Only the print functions seems to be failing.
View 1 Replies
View Related
