VideoStudio :: X5 Ultimate Transition Effects Causing A Crash
Aug 4, 2013
I didn't have any problems with transition effect, but suddenly,some effects, like flip album and the ProDad plugin are causing VS to hang and not respond: flip album is causing the hang just after the automatic preview (can't turn this off) and just clicking on the ProDad plugin is freezing VS. They are also causing the rendering process to hang (turned off smart rendering as well).I've reinstalled the software wituhout SP2 and still the problem persists.No matter what kind of media I insert before or after the transitions, the problem is the same.I assume there is some kind of incompatibilty between VS and some OS/driver update - any way to know for sure?
View 14 Replies
ADVERTISEMENT
May 5, 2013
I am running XP and X5 Ultimate.My workflow follows :
File
Insert media file to library
Insert Digital media
Select drive in import from digital media box
Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.
View 2 Replies
View Related
May 3, 2013
I've just got an iPhone 4S and shot a test video to edit. However, when I load it and try to create a file, VS10+ crashes every time within a few seconds.
All I'm doing is trying add a few simple titles with the output file being 'same as project settings' so the output should be mpg4, PAL, 720 x 576. This is the first time I've tried editing iPhone video and I've never had this problem with any stuff that I've edited in the past.
View 4 Replies
View Related
Mar 14, 2011
I had the x3 trial. Then bought the x4. And uninstalled x3 first.
X3 worked fine, but X4 crashes
( 50% of other cpu and reading
vstudio.exeFASTIO_QUERY_OPENC:Documents and SettingsUserMy DocumentsCorel VideoStudio Pro14.0SYSERSUCCESS
and
vstudio.exeFASTIO_QUERY_OPEND:Program FilesCorelCorel VideoStudio Pro X4en-USkernel32.dllSUCCESS)
It crashes every time when I click the Transition -> My Favorities (dropdown)
specs: xp sp3, 4gb ram, core 2 duo, ssd, directX 9.0C (4.09.00000.0904)
I might have installed some transition effects etc. that the app advertises in the start. how to remove them?
View 1 Replies
View Related
Dec 12, 2011
I recently upgraded from X2Pro to X4 ultimate and I'm missing some transition effects that I had in X2 but are not in X4.
I'm really disappointed that transition effects and other stuff from X2 content pack are not included in x4 ultimate, and I cant find any content pack for x4 on corel website, is there any?
Can I use transition effects from X2 in X4? I hate to have to use X2 after paying for X4 Ultimate just for transition effects
View 8 Replies
View Related
Mar 11, 2013
After creating a DVD or HD Blu-ray disc to watch on my HD TV the video skips after every transition effect while watching the DVD or HD Blu-ray disc on my tv's and computers. The videos do not skip when I upload them to the internet.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
[Code].....
View 5 Replies
View Related
Sep 22, 2012
I'm currently using Pro X4.
I would like to know how to use a Transition without it affecting all tracks above it?
For example, if you apply a crossfade transition to a title track to make it fade-in, it will also affect the video track(s) above. The videotrack will suddenly turn black and then fade in together with the title.
Actually it will affect every track above the transition effect. So if you use for example the 'Switch Off' transition on the 2nd title track, it will also switch off the 1st title track, any possible overlay tracks and the main video track.
I can't imagine this should be happening. Is it a bug on my computer or is it a software issue
View 7 Replies
View Related
Sep 23, 2011
Can I create and made transition effects in vs pro x4? Or need other software for it.
View 10 Replies
View Related
Apr 5, 2013
At the beginning of the cross fade transition effect the audio drops out completely and suddenly get's loud at the end of the effect.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
video format: mpeg-2, upper field
attributes: 24bits, 1440x1080, 16:9
frame rate: 29.970
data rate: 25000
Audio:
Audio type-mpeg audio layer 2
total samples-18, 166,967
attributes-48000hz, 16bit stereo
layer-2
bit rate-384
a. Where did they originate (camcorder, internet, TV card etc) Camcorders-SonyFX1 HDV and Canon XHA1 HDV
b. How did they get onto your hard drive (download, firewire, USB cable etc.) Firewire
Project Properties-
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 256 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
View 2 Replies
View Related
Mar 17, 2013
I thought this would be fixed with version 6 but I guess it isn't or maybe I'm still just doing it wrong. How do you apply a transition effect to just the overlay track. For instance I want to apply dissolve to an animated gif that I'm using in my overlay track but when I do it gets applied to everything and even the primary track blacks out and then dissolves back in. So frustrating. I switched over to final cut pro because of this but love the ease of use of VSP so I bought version 6 hoping this issue had been fixed.
View 1 Replies
View Related
Aug 30, 2011
i wanted to try it because of its flexible overlay capabilities. I have a main video on the background and i want a small overlay video to appear on top of it, but to come in with a transition. I couldn't make the transition to effect only on the overlay video, it effects the whole video (both main and overlays together). Is there a way to make it work only on the overlay video?
View 10 Replies
View Related
Jan 15, 2014
I've now had this happen with two completely separate projects today where I preview my edit, everything looks and sounds good, but then when I export there's a clear audio stutter wherever I used a constant power audio tansition.
NOTE: I experienced the Constant Power bug that happen last month that sounded like a super loud buzz. This is different.
View 2 Replies
View Related
Apr 26, 2013
I am doing simple extrusions in 3D. One or 2 extrusions in a document. Specifically, earrings. I have to save every few steps , because PS is going to crash at least once per hour.
My computer has 12GB RAM, and a 1GB GPU. My MAC is less than a year old. It should be able to handle the workload.
When I'm doing 3D I shut down all other programs on my computer.
I have turned up all the preferences inside PS pertaining to performance.
When I save a document the SAVE time is 3-7 seconds. Each time I hold my breath that it doesn't fail.
View 5 Replies
View Related
Sep 11, 2013
I am using X5 on a Win 7 64 bit system. I am having an issue with colors that manifests itself in 3 ways: When I try to change a color from rgb or cmyk to PMS, the program freezes and gives the error message that CorelDraw has stopped working. Files that have been created using more than one palette will not open on this system - although they will open fine on other machines running X5. Finally, if I even mouse-over the color palettes tab from the "Windows" drop-down menu the same thing happens.
I have used F8 to reset the workspace and when that did not work, I re-installed Coreldraw with the same result.
View 2 Replies
View Related
Jun 26, 2012
So A client hires a designer to create a vehicle wrap. He does it in Photoshop. If you have not done vehicle wraps before you DO NOT DESIGN IN PHOTOSHOP!!! Anyway, he sends me a link to download a psb file. Another bad sign. Means the file is huge! 1 hr to download. I open it in photoshop (at least he left it unflattened) and reduce it down enough to make a psd with layers intact. I then import it into Corel and begin placement into the vector vehicle template. Once I get all the images fiting nicely I hit save. Come back to it the next day and it won't open. Message says a bitmap is not right "Abort, Retry or Ignore" I try the backup file, same error. I try to move a copy to my hard drive instead of working over the network. No go! Try rebooting, no go! Rebuilt the file agian and saved that version to my desktop. Saved successfully, made a couple changes and then CorelDraw crashes and shuts down. Try to reopen the file and same errors occur.
View 4 Replies
View Related
Aug 11, 2012
I just set up a new rig (specs below) and everything was going great. I added a second monitor and suddenly PS CS6 starts crashing randomly. I think I discovered that PS will not support a dual monitor config if each monitor is on a different video card.
My main monitor (30" dell) is powered by an ATI Raedeon HD 4850. My secondary monitor (HP Elite L2201x) is powered by the on board Intel HD Graphics 4000 because the display only uses Display Port. Both are supported cards and PS runs fine with either one used independently with or without GPU support.
When I have BOTH connected the Graphics Processor Settings box is greyed out and when I mouse over that section the description box below says "Graphics hardware acceleration is unavailable. You will need to upgrade your video driver and possibly your video card" and the programs crashes randomly. The same behavior occurs regardless of on which monitor PS is being displayed.
I have attempted to tweak BIOS settings to establish a hardware priority so PS would only see one card but to no avail. As this issue prevents me from using my second monitor entirely (I use PS daily), I'd really like to get it resolved.
Motherboard: GIGABYTE GA-Z77X-UD3H
Processor: Intel Core i7-3770K CPU
RAM: 32GB
Boot Drive: OCZ 128GB SSD
OS: Win7 64
Video card details: Current drivers on both
Primary: ATI Radeon HD 4850
Secondary: Intel HD Graphics 4000 (HD4000)
View 6 Replies
View Related
Apr 22, 2009
I'm creating a macro to run on creation of a new assembly from a particular template. I created a macro named autonew in the template's VBA project file. It works great except for one thing: if the user presses "Cancel" on my form, I want to not only unload the form but also close the file. For this case I've used:
ThisApplication.ActiveDocument.Close True
I've created a test template assembly with only this line in autonew, and it crashes Inventor. The same line of code an a non-autonew module within the template file's VBA project closes the document without error or crashing. I assume this is a bug and not as designed.
Is this a bad way to accomplish the task of closing a newly created assembly? Even if this isn't the preferred approach, I don't think this should cause a crash.
I'm running Inventor 2009 SP1.
I'm running 64 bit on XP64
View 5 Replies
View Related
Aug 28, 2013
I want to know if it is possible to creat a script that will rotate the cam wheel show at the pivot point, while causing the rectangle to oscillate up and down in cadence with the ppoint of the whell that is contacting it.
I have a simple script that rotates the cam wheel, but every time I run it, AC crashes. I am on Windows 7 Ultimate 64bit and I have installed the latest service pack. Here is the script:
rotate
g
1
45.5447,44.7299
1
rscript
I'm not sure what other information you may need to diagnose this, so just let me know. There is no error message given, it just freezes up.
View 3 Replies
View Related
Jan 4, 2013
We have a work station with C3D 2013 that has started crashing when trying to open the pipe network vista. We have to edit the pipes using pipe properties for the individual pipes. This makes it difficult when trying to edit a large network. The drawings work fine on other computers. It has something to do with the settings on this machine. What would be causing the crash when trying to open the vista window?
View 5 Replies
View Related
Feb 16, 2014
Specifically the Boris Continuum plugins. I get this error:
Seems to happen for really no reason, even if I apply the effect and let the comp sit idle, it hapens after a minute or so.
Win 7x64, AE CS6 11.04, 16 gb of RAM GPU: GeForce GTX560ti
View 1 Replies
View Related
Dec 18, 2012
Ever since the latest update to PS CS6, when I add a simple effect to a text layer, like emboss, the working image disappears when I zoom in and out. Also, the layer effect does nothing to the type. It's almost like a dispay issue. When I turn the layer effect off, my image is visible again.
View 1 Replies
View Related
Dec 27, 2013
I installed PSP X6 Ulitimate and when I first pulled it up I saw Instant Effects Thumbnails under the Adjust Tab. I experimented with a few then had to get off. When I reopened the program all the thumbnails were gone. No matter what I do I can't get the Instant Effects to show up in any of the tabs. Sometimes I'll scroll the mouse over the area, click it, and the photo will have one of the instant effects applied, e.g. black and white. That doesn't do me any good because I can't see what is being applied before clicking if the thumbnails aren't showing. how to get the instant effects to show back up?
View 4 Replies
View Related
Aug 5, 2013
If there are any 3D plugins that will work on Pro x6 Ultimate . I've had a look at the VIDEO COPILOT | Element 3D - 3D Object based Particle Plug-in. It lists a lot of programs it will work with but not Corel.
View 1 Replies
View Related
May 3, 2012
I recently purchased the x5 ultimate pro edition, but a few years ago i had an older version but i noticed something....
the older version used to have close to 40 transitions, but the new one even with the extra download pack still only 3 transitions.. did something not get installed?
View 2 Replies
View Related
Apr 25, 2012
I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect
Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???
How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!
View 3 Replies
View Related
Mar 11, 2013
Since downloading the new version I have ran across a display issue. When editing, all of the popup display boxes are too large and extend under my taskbar. I have tried everything such as changing the monitor's screen resolution to nearing every setting. And I have searched and attempted to come up with a fix from with in the preferences, UI layout, etc.
View 1 Replies
View Related
May 25, 2013
I have prepared a folder using AVCHD for BLU RAY Disc( that is I am not trying to burn Blue Ray from timeline). When I go in share-create disc-pick blue-ray, the program aborts with message 'Program will abort Contact technical support'. No details on error
The file size is less than 6 GB
I am using WIN 8 have 16 GB of ram, Have Blue Ray burner and Quad Core CPU. I have checked and Burner's firmware is up to date Same for Videostudio 15. It has all the updates and patches installed.
View 3 Replies
View Related
Apr 1, 2011
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
View 5 Replies
View Related
Mar 13, 2013
I am running Vid Studio Pro X4 and am 3 months into a year long project. I was interested in upgrading to Vid Studio X6 Ultimate but wanted to know if X6 will be able to read and properly load the .vsp file for this project which already has many clips, transitions, effects, and audio. Or, should I just stay with X4 until December when my project is finished and then upgrade starting next year's project fresh.
View 2 Replies
View Related
Feb 13, 2012
I have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.
View 5 Replies
View Related
Mar 20, 2013
My new Pro X6 doesn't show me the Smart Sounds. You can't klick something in the smartsound window! I also have installed Pro X4, and here I have all smartsounds!
View 10 Replies
View Related
