I recently upgraded from X2Pro to X4 ultimate and I'm missing some transition effects that I had in X2 but are not in X4.
I'm really disappointed that transition effects and other stuff from X2 content pack are not included in x4 ultimate, and I cant find any content pack for x4 on corel website, is there any?
Can I use transition effects from X2 in X4? I hate to have to use X2 after paying for X4 Ultimate just for transition effects
After creating a DVD or HD Blu-ray disc to watch on my HD TV the video skips after every transition effect while watching the DVD or HD Blu-ray disc on my tv's and computers. The videos do not skip when I upload them to the internet.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
[Code].....
I'm currently using Pro X4.
I would like to know how to use a Transition without it affecting all tracks above it?
For example, if you apply a crossfade transition to a title track to make it fade-in, it will also affect the video track(s) above. The videotrack will suddenly turn black and then fade in together with the title.
Actually it will affect every track above the transition effect. So if you use for example the 'Switch Off' transition on the 2nd title track, it will also switch off the 1st title track, any possible overlay tracks and the main video track.
I can't imagine this should be happening. Is it a bug on my computer or is it a software issue
Can I create and made transition effects in vs pro x4? Or need other software for it.
View 10 Replies View RelatedAt the beginning of the cross fade transition effect the audio drops out completely and suddenly get's loud at the end of the effect.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
video format: mpeg-2, upper field
attributes: 24bits, 1440x1080, 16:9
frame rate: 29.970
data rate: 25000
Audio:
Audio type-mpeg audio layer 2
total samples-18, 166,967
attributes-48000hz, 16bit stereo
layer-2
bit rate-384
a. Where did they originate (camcorder, internet, TV card etc) Camcorders-SonyFX1 HDV and Canon XHA1 HDV
b. How did they get onto your hard drive (download, firewire, USB cable etc.) Firewire
Project Properties-
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 256 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
I thought this would be fixed with version 6 but I guess it isn't or maybe I'm still just doing it wrong. How do you apply a transition effect to just the overlay track. For instance I want to apply dissolve to an animated gif that I'm using in my overlay track but when I do it gets applied to everything and even the primary track blacks out and then dissolves back in. So frustrating. I switched over to final cut pro because of this but love the ease of use of VSP so I bought version 6 hoping this issue had been fixed.
View 1 Replies View Relatedi wanted to try it because of its flexible overlay capabilities. I have a main video on the background and i want a small overlay video to appear on top of it, but to come in with a transition. I couldn't make the transition to effect only on the overlay video, it effects the whole video (both main and overlays together). Is there a way to make it work only on the overlay video?
View 10 Replies View RelatedI didn't have any problems with transition effect, but suddenly,some effects, like flip album and the ProDad plugin are causing VS to hang and not respond: flip album is causing the hang just after the automatic preview (can't turn this off) and just clicking on the ProDad plugin is freezing VS. They are also causing the rendering process to hang (turned off smart rendering as well).I've reinstalled the software wituhout SP2 and still the problem persists.No matter what kind of media I insert before or after the transitions, the problem is the same.I assume there is some kind of incompatibilty between VS and some OS/driver update - any way to know for sure?
View 14 Replies View RelatedMy place of work recently changed from Autocad 2007 to Autocad 2013 (big jump.. i know), when we try to plot old drawings the .ctb files that were used in 2007 now says missing beside it. We also only have a few options in regards to .ctb files, whereas in older versions we had hundreds to choose from. Any function to get our old .ctb files back or where to download them?
View 1 Replies View Relatedi just update my old VSX2 to the new just bought VSX4, and i was surprise to discover that the number of album transition is decreased from 7 in X2 to 1 in X4.
so, is there any possibilities to keep the album transition from X2 in the new X4.
what's happen whe i will try to open my old VSP Project using these trainsition in the X4 product ?
I just added 3 new blue fx transition packages to VS Pro X4 and have others to add ( boris, canopus, adorage).... I noticed that the first 2 new blue packages ( 3d explosions and 3d transformations) were successfully added to their own category in the drop down list of transition effects, so now the list includes the new blue sampler that Corel provided, and both these additional packages. When I added the third package New Blue Paint Blends, it did not appear in its own category but the effects are present when you click on "all".... ( which is a nuisance to search through). I'm wondering if the problem that existed in VS2 where by there were a limited number of transition categories you could have is still a problem in VS pro X4 or whether this is an issue just for Paint Blends. I'd like to know before I add on the other packages... I hate for all the effects ( 100s of them) to end up in my "all" list.
Also is there any way to manipulate this list... and force a location?? I can only see that all the effects are listed individually in the Vfx_plug folder.
I saw this application that have thousands of effect, will that use in x5?
[URL]
I'm trying out a trial version of VS X5 before deciding whether to buy it or not.
Before buying I want to make the simplest of projects in 1080p@50fps. But right from the start it seems like this is not going to be easy.
I don't know if this is related to the "transition end blips" bug, but somewhere in the transition (probably at the end?)
Settings >Preferences > Edit >Default Transition Effect
The transition I select here, no matter what I choose, reverts back to "Random" once "ok'd"
The workaround this is to disable this option altogether and select manually.
long slide show to change via pref. to have the transitions auto added.But it has not worked?
View 4 Replies View Relatedsolving the problem of brief "blips" or "jerks" following transitions in video generated by VS X2 from AVCHD clips.
Last November, I reported to Corel the problem of brief "jerks" or "blips" in AVCHD video files or hybrid discs generated by VS Pro X2 from clips created by my Sony SR11. There was a long thread here in which several Canon users stated that they had the same problem. [URL]
In addition to transitions, I also get the same blips in the video at the end of titles placed over the top of video. I am not sure whether Canon users have that problem.
Since the problem still has not been fixed, I followed up last week with Corel asking for the status of the fix for this problem. In their reply, they asked for more sample clips and asked that I post their ftp site URL where you can upload clips that will demonstrate the problem. They want clips from the various AVCHD camcorder models which are having this problem. They didn't say whether they want raw clips or VS-generated clips that contain the blip, but I suspect they want raw clips so they can try to re-create the problem on their systems.
When selecting a clip to upload, what appears to cause the problem is that at the end of a transition or title, the video jumps back one frame and then proceeds forward again. Thus two frames are repeated, which causes the "blip". You can see this by viewing the generated file frame-by-frame.
So the blip is most apparent when there is obvious, but smooth, movement in the original clip. The raw clip I sent them when I reported the problem in November was of a truck driving down a highway, moving across the screen from left to right, and was shot on a tripod to eliminate any camcorder movement. In the VS-generated video, at the end of the transition, the truck jumped backwards slightly then went forward again.
A clip containing little or no movement, or a clip that is already jerky and unsteady, will not illustrate the problem well. So please select your clip accordingly. A single object moving across the screen against a non-moving background would be ideal.
Following is the ftp site where you can upload clips.
[URL]
I'm using corel video studio pro x5 on win 7 home p. 32 bit, 4gb ram and i have an annoying problem with the transitions. when i add a transition between two videos, after transition, the sound of second video becomes interrupted for a sec in the beginning, briefly something like plays-stops-plays.
View 14 Replies View RelatedI'm making great progress with my movie making skills! But.... I'm trying to add some transitions to a series of images and I keep getting "there is no gap to apply a transition effect". Trouble is I can't see how I can make a gap.
View 2 Replies View RelatedI am making a slideshow using Video Studio X4 and want to change and save the color in the transition from one picture to the next. I can change the color but have not figured out how to save it and possibly make the new color the default.
View 3 Replies View RelatedI have Video Studio Ultimate X6. For some reason, when I click on a transition to drag it to the time line, the entire program locks up. Some times, I can drag 1 or 2 transitions without a problem - and on the third, it locks up. I have restarted the computer numerous times, and that doesn't solve the problem.
Running Windows 7, 64 bit, 8 gigs of ram, Intel Core i7.
The program seems to work perfectly other than this one issue.
I'm working in a new project and i want to know how can i create a custom transition?
View 7 Replies View RelatedI'm using the Fade to Black transition in X5. The problem is that the fade out cuts off the end of the clip before it fades into the next one.
I want the fade effect but don't want to lose anything of the clips even if it means there will be a longer black screen during the fade. Is this possible and if so how?
I am using VSX4 Pro.
If I go to Settings>Preferences>Edit Tab>Transition Effect and choose 'crossfade' for the default transition I seem to be be able to set the duration to 1 second, but not less. I would like to set it to .10 (1 tenth) of a second, but it will not let me choose that. Now in the Video track I can edit each transition to less than a second, but I have about 150+ photos want to insert and don't want to have to edit manually each transition between each picture. I would rather just insert them all in one drag and have the transition be set to 1 tenth of a second in the project preferences.
I'm a fairly new user to Video Studio - started with X2 version 12, which had 30+ mask type transitions. I used these mask transitions the most for my editing. I recently upgraded to Pro X3 and now only have 6 mask transitions.
I have searched the corel site, this site, and the Get More feature in X3 - but can't find any transition downloads anywhere. The only options available in Get More are titles and templates (styles). I still have files from X2 on my computer - which folder transitions are kept in or what file type they are? I might be able to track the specific files down and move them over to my X3 files.I've only been using X3 for a few days and I'm ready to go back to X2!
I am generating a video with lots of still images in it. I want the default transition time for the crossfade to be 0.5 seconds, but I can't find any way to specify anything other than integer values with a 1 second minimum. Is it possible to do this or do I have to modify each transition property?
View 6 Replies View RelatedI've made several dvds over the past 12 months or so and this has not occured but on my latest venture I am getting a nano-second of the video picture narrowing from wide screen during each transition. It then almost immediately goes back to wide screen, causing something like a sideways blink. I am mainly using crossfades with the occasional circle wipes, clocks and spins. This does not occur, however, when using crossfade on the still images, which I pan and zoom, and include at the end of the video.
I am using a JVC Everio Camcorder with a Medion Akoya E600 D (MD8328) PC with Windows Vista 32bit.
I have tried several methods of creating the video file: Same as Project Settings, Same as first Video Clip, MPeg Optimiser and even custom, all with Upper Field First and all with the same result.
I had the x3 trial. Then bought the x4. And uninstalled x3 first.
X3 worked fine, but X4 crashes
( 50% of other cpu and reading
vstudio.exeFASTIO_QUERY_OPENC:Documents and SettingsUserMy DocumentsCorel VideoStudio Pro14.0SYSERSUCCESS
and
vstudio.exeFASTIO_QUERY_OPEND:Program FilesCorelCorel VideoStudio Pro X4en-USkernel32.dllSUCCESS)
It crashes every time when I click the Transition -> My Favorities (dropdown)
specs: xp sp3, 4gb ram, core 2 duo, ssd, directX 9.0C (4.09.00000.0904)
I might have installed some transition effects etc. that the app advertises in the start. how to remove them?
I'm going to buy the videostudio X5, but it seems not many effect and menu I can choice from the application, will that be different since I'm using the trial version. I have the hollywood fx for pinnacle, is possible to use them? if not, where I can get some Videostudio sources?
View 2 Replies View RelatedI've got a lot of crossfade transitions in a project and want them to be 2 seconds. Altering the default 1 second for every one is a lengthy pain - is it possible to change the default and if so how>?
View 2 Replies View RelatedTrying to edit an 8 to 10 second fade from black to a clip.
The closest I can get is this: Black color, Crossfade Transition, Video Clip This would work, but transitions are limited to 3 seconds.
Also, is there a way to freeze a video for a defined amount of time? I know inserting a capture of the last frame as a still image would work, but seems like a bit of extra work.
Video Studio Pro X4.
I have Pro X4 ultimate. Sommes filters transition 3 D like cube floating don't work. I have reinstall many time but the result is the same. The others filters are OK.
Before I had Pro X3 et Pro X4 and it was OK.
