VideoStudio :: Audio Jumping Out Loud At End Of Transition Effects
Apr 5, 2013
At the beginning of the cross fade transition effect the audio drops out completely and suddenly get's loud at the end of the effect.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
video format: mpeg-2, upper field
attributes: 24bits, 1440x1080, 16:9
frame rate: 29.970
data rate: 25000
Audio:
Audio type-mpeg audio layer 2
total samples-18, 166,967
attributes-48000hz, 16bit stereo
layer-2
bit rate-384
a. Where did they originate (camcorder, internet, TV card etc) Camcorders-SonyFX1 HDV and Canon XHA1 HDV
b. How did they get onto your hard drive (download, firewire, USB cable etc.) Firewire
Project Properties-
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 256 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
View 2 Replies
ADVERTISEMENT
Jan 11, 2011
I have been using VS since version 9 and I seem to get the same thing on each version. After I have completed the project and burn to DVD the audio track seems too loud. I don't seem to notice it playing back the file (computer speakers aren't much chop) but once in the DVD player you always have to quickly turn down the volume once it starts playing. There is no static or distortion its just too loud. I now go into every song I input on the audo track and lower the levels. And it only appears to be the music. Audio in the video clips comes out at normal levels and does not need adjusting. If anything I have to boost the video clip audio because it's too low. The songs I import are directly from CD's or MP3's from my music folder.
Its not a real problem as I can fix by constantly lowering each song but is there a way to set the preference to lower the output on the audio tracks? That is to see the level automatically set below the 0 line when music is added. Or is it something in the burn proceedure in MF7?
View 2 Replies
View Related
Dec 12, 2011
I recently upgraded from X2Pro to X4 ultimate and I'm missing some transition effects that I had in X2 but are not in X4.
I'm really disappointed that transition effects and other stuff from X2 content pack are not included in x4 ultimate, and I cant find any content pack for x4 on corel website, is there any?
Can I use transition effects from X2 in X4? I hate to have to use X2 after paying for X4 Ultimate just for transition effects
View 8 Replies
View Related
Mar 11, 2013
After creating a DVD or HD Blu-ray disc to watch on my HD TV the video skips after every transition effect while watching the DVD or HD Blu-ray disc on my tv's and computers. The videos do not skip when I upload them to the internet.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
[Code].....
View 5 Replies
View Related
Sep 22, 2012
I'm currently using Pro X4.
I would like to know how to use a Transition without it affecting all tracks above it?
For example, if you apply a crossfade transition to a title track to make it fade-in, it will also affect the video track(s) above. The videotrack will suddenly turn black and then fade in together with the title.
Actually it will affect every track above the transition effect. So if you use for example the 'Switch Off' transition on the 2nd title track, it will also switch off the 1st title track, any possible overlay tracks and the main video track.
I can't imagine this should be happening. Is it a bug on my computer or is it a software issue
View 7 Replies
View Related
Sep 23, 2011
Can I create and made transition effects in vs pro x4? Or need other software for it.
View 10 Replies
View Related
Mar 17, 2013
I thought this would be fixed with version 6 but I guess it isn't or maybe I'm still just doing it wrong. How do you apply a transition effect to just the overlay track. For instance I want to apply dissolve to an animated gif that I'm using in my overlay track but when I do it gets applied to everything and even the primary track blacks out and then dissolves back in. So frustrating. I switched over to final cut pro because of this but love the ease of use of VSP so I bought version 6 hoping this issue had been fixed.
View 1 Replies
View Related
Aug 30, 2011
i wanted to try it because of its flexible overlay capabilities. I have a main video on the background and i want a small overlay video to appear on top of it, but to come in with a transition. I couldn't make the transition to effect only on the overlay video, it effects the whole video (both main and overlays together). Is there a way to make it work only on the overlay video?
View 10 Replies
View Related
Aug 4, 2013
I didn't have any problems with transition effect, but suddenly,some effects, like flip album and the ProDad plugin are causing VS to hang and not respond: flip album is causing the hang just after the automatic preview (can't turn this off) and just clicking on the ProDad plugin is freezing VS. They are also causing the rendering process to hang (turned off smart rendering as well).I've reinstalled the software wituhout SP2 and still the problem persists.No matter what kind of media I insert before or after the transitions, the problem is the same.I assume there is some kind of incompatibilty between VS and some OS/driver update - any way to know for sure?
View 14 Replies
View Related
Jun 23, 2012
I've assembled 25 titles on DVD and noticed all of them are way too loud compared to my normal tv volume. My computer volume is way down, too, so I'm wondering how to turn down the volume on the whole DVD.
View 3 Replies
View Related
Aug 23, 2013
As I am testing more functionalities (and finishing up a video, obviously), I am trying to add a background music. For now, I used one that came with VS. I am reducing the Clip volume to 3 (I think that is 3%) and it is still too loud. If I move it down to 2, it is inaudible. Is there another adjustment somewhere? I really cannot have a background music compete with the narration!
View 14 Replies
View Related
Dec 24, 2013
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies
View Related
Jan 15, 2014
I've now had this happen with two completely separate projects today where I preview my edit, everything looks and sounds good, but then when I export there's a clear audio stutter wherever I used a constant power audio tansition.
NOTE: I experienced the Constant Power bug that happen last month that sounded like a super loud buzz. This is different.
View 2 Replies
View Related
Oct 17, 2013
I have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
View 4 Replies
View Related
Mar 17, 2012
I'm a relative noob on Corel (I have Pro X4) and video editing in general. My primary concern is the video (avi file) is jumping when I drag portions of it into the timeline. It plays fine in the library, but when I drag it into the timeline the clip will jump/skip/jerk. Is there a way to correct this? Do I have to alter some settings? I have a decent (not amazing) Toshiba L650 4GB RAM laptop that is relatively new. Surely seeing as I'm only just adding the first clips in (there is already a 10 minute sound track in place) it shouldn't be jumping already should it?
My only other question for now is is the overlay track virtually the same as the video track? I prefer using the overlay track as I can drop videos anywhere on the video as opposed to it defaulting to the start. All I do is drag the corners out to make it the same size as what it would have been in the video track.
View 14 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
May 4, 2011
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
View 2 Replies
View Related
Apr 24, 2011
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
View 14 Replies
View Related
Jan 29, 2012
i just update my old VSX2 to the new just bought VSX4, and i was surprise to discover that the number of album transition is decreased from 7 in X2 to 1 in X4.
so, is there any possibilities to keep the album transition from X2 in the new X4.
what's happen whe i will try to open my old VSP Project using these trainsition in the X4 product ?
View 2 Replies
View Related
Sep 17, 2011
I just added 3 new blue fx transition packages to VS Pro X4 and have others to add ( boris, canopus, adorage).... I noticed that the first 2 new blue packages ( 3d explosions and 3d transformations) were successfully added to their own category in the drop down list of transition effects, so now the list includes the new blue sampler that Corel provided, and both these additional packages. When I added the third package New Blue Paint Blends, it did not appear in its own category but the effects are present when you click on "all".... ( which is a nuisance to search through). I'm wondering if the problem that existed in VS2 where by there were a limited number of transition categories you could have is still a problem in VS pro X4 or whether this is an issue just for Paint Blends. I'd like to know before I add on the other packages... I hate for all the effects ( 100s of them) to end up in my "all" list.
Also is there any way to manipulate this list... and force a location?? I can only see that all the effects are listed individually in the Vfx_plug folder.
View 9 Replies
View Related
Sep 4, 2012
I saw this application that have thousands of effect, will that use in x5?
[URL]
View 3 Replies
View Related
Jan 4, 2013
I'm trying out a trial version of VS X5 before deciding whether to buy it or not.
Before buying I want to make the simplest of projects in 1080p@50fps. But right from the start it seems like this is not going to be easy.
I don't know if this is related to the "transition end blips" bug, but somewhere in the transition (probably at the end?)
View 14 Replies
View Related
Apr 23, 2012
Settings >Preferences > Edit >Default Transition Effect
The transition I select here, no matter what I choose, reverts back to "Random" once "ok'd"
The workaround this is to disable this option altogether and select manually.
View 4 Replies
View Related
Aug 9, 2013
long slide show to change via pref. to have the transitions auto added.But it has not worked?
View 4 Replies
View Related
Apr 7, 2009
solving the problem of brief "blips" or "jerks" following transitions in video generated by VS X2 from AVCHD clips.
Last November, I reported to Corel the problem of brief "jerks" or "blips" in AVCHD video files or hybrid discs generated by VS Pro X2 from clips created by my Sony SR11. There was a long thread here in which several Canon users stated that they had the same problem. [URL]
In addition to transitions, I also get the same blips in the video at the end of titles placed over the top of video. I am not sure whether Canon users have that problem.
Since the problem still has not been fixed, I followed up last week with Corel asking for the status of the fix for this problem. In their reply, they asked for more sample clips and asked that I post their ftp site URL where you can upload clips that will demonstrate the problem. They want clips from the various AVCHD camcorder models which are having this problem. They didn't say whether they want raw clips or VS-generated clips that contain the blip, but I suspect they want raw clips so they can try to re-create the problem on their systems.
When selecting a clip to upload, what appears to cause the problem is that at the end of a transition or title, the video jumps back one frame and then proceeds forward again. Thus two frames are repeated, which causes the "blip". You can see this by viewing the generated file frame-by-frame.
So the blip is most apparent when there is obvious, but smooth, movement in the original clip. The raw clip I sent them when I reported the problem in November was of a truck driving down a highway, moving across the screen from left to right, and was shot on a tripod to eliminate any camcorder movement. In the VS-generated video, at the end of the transition, the truck jumped backwards slightly then went forward again.
A clip containing little or no movement, or a clip that is already jerky and unsteady, will not illustrate the problem well. So please select your clip accordingly. A single object moving across the screen against a non-moving background would be ideal.
Following is the ftp site where you can upload clips.
[URL]
View 14 Replies
View Related
Aug 11, 2012
I'm using corel video studio pro x5 on win 7 home p. 32 bit, 4gb ram and i have an annoying problem with the transitions. when i add a transition between two videos, after transition, the sound of second video becomes interrupted for a sec in the beginning, briefly something like plays-stops-plays.
View 14 Replies
View Related
Feb 15, 2012
I'm making great progress with my movie making skills! But.... I'm trying to add some transitions to a series of images and I keep getting "there is no gap to apply a transition effect". Trouble is I can't see how I can make a gap.
View 2 Replies
View Related
Jan 18, 2013
I am making a slideshow using Video Studio X4 and want to change and save the color in the transition from one picture to the next. I can change the color but have not figured out how to save it and possibly make the new color the default.
View 3 Replies
View Related
Nov 9, 2013
I have Video Studio Ultimate X6. For some reason, when I click on a transition to drag it to the time line, the entire program locks up. Some times, I can drag 1 or 2 transitions without a problem - and on the third, it locks up. I have restarted the computer numerous times, and that doesn't solve the problem.
Running Windows 7, 64 bit, 8 gigs of ram, Intel Core i7.
The program seems to work perfectly other than this one issue.
View 6 Replies
View Related
Oct 28, 2013
I'm working in a new project and i want to know how can i create a custom transition?
View 7 Replies
View Related
May 4, 2012
I'm using the Fade to Black transition in X5. The problem is that the fade out cuts off the end of the clip before it fades into the next one.
I want the fade effect but don't want to lose anything of the clips even if it means there will be a longer black screen during the fade. Is this possible and if so how?
View 5 Replies
View Related
