Premiere Pro :: CC Closed Captions Format On Render
Feb 8, 2014
I have added closed captions to my Premiere Pro project took bloody ages and all looks and runs great within the project. Simple white captions over the video.
Although, when I render the video out with the closed captions embedded within the video, cirtain captions seem to have slightly "dodgy" formatting when played back in quick time player.
Some sections of the captions have a black background on and some do not. As I previously mentioned the captions are all fine within the project. It just seems to happen on the render file
View 1 Replies
ADVERTISEMENT
Dec 12, 2013
I'm making a documentary with subtitled footage. A translator has used closed captions within Premiere to create the subtitles for me.
Now I need some way of formatting them. I have the full Adobe CC suite (including After Effects and Premiere) but haven't been able to find a way to convert or export Premiere Closed Captions into a way that allows me to format them (ie change font, size etc).
View 1 Replies
View Related
Apr 15, 2014
Running Premiere CC 7.2.2 on a Mac Mini 10.9.2. I noticed that exporting ProRes422 media does not include embedded closed captions when exporting via AME CC. It does however work when exporting directly from Premiere. The AME file has no captions at all, while Premiere's export does. So while this is not a show stopper, it greatly slows down production since Premiere is tied up until the export is complete. I have checked AME's preset which is identical as in Premiere and can only think that processing the closed captions is not included when the media is sent to the queue.
If no one from Adobe can shed light, I will file a bug report as it most certainly looks like it is.
View 1 Replies
View Related
Apr 5, 2014
Im recording 1080p 30fps with my Canon t3i and it lags during the video preview. Is it possible to render the file to a different format to increase its speeds? I heard this was possible, I just transfered over from Sony Vegas, and in Vegas I didnt have much lag under 1/4 preview.
View 6 Replies
View Related
Nov 4, 2012
I'm using PSE 10 with Windows 7, and I'd like to change the formatting of the captions on the photos I've got in slide shows, and those I'd like to print, i.e., change fonts, size, centered, etc. I've checked various manuals, online sources, and haven't found info on this.
View 2 Replies
View Related
Mar 3, 2014
I have a client that would like me to add closed captioning to his videos.
View 6 Replies
View Related
Mar 26, 2014
I recently upgraded to a trial of 7.2.1 (I'm a *long* time CS user) and am having an issue with closed captioning that's got me pulling my hair out. Upon importing a .scc file and inspecting it in the captions tab, I have all the captions I'm expecting at the proper timecodes (for example if I look up the start of a line in the program window the start timecode matches the "In" timecode listed in the Captions tab).
However upon playing the timeline and turning on Closed Caption display - the captions are not displaying (nor disappearing) at the in/out timecodes listed in the caption tab. They're showing up (roughly) seven seconds later at the beginning of the program, and over 11 seconds late by the end of the program.
I guess it's possible it's just a player issue and the issue will correct itself on output, but that's not really comforting. I could do what I need on this job by renewing my license for some other software, but Premiere would be a more versitile use of my limited software upgrade budget - but only if it can actually do the job properly.
View 7 Replies
View Related
Mar 29, 2014
I accidentally closed the tab that showed all the media I imported and I can't find a way to bring it up.
View 2 Replies
View Related
Jan 14, 2014
Premiere Pro CC reports generic importer error.
View 1 Replies
View Related
Aug 8, 2012
I am using Premiere CS6 (Windows 7) to create a movie with closed captioning. I use the MovieCaptioner software (http:[url]...) to create the mcc captions dada file. In Premiere I attach the mcc file to a timeline sequence and enable closed captioning display. I can see the movie with captions in the program window. In closed captioning settings I have cc area and service both set to 1. I am having difficulty finding the correct set of parameters that will make Premiere export a movie which includes and displays the captions.
View 28 Replies
View Related
Nov 29, 2011
I caption my football photos with each player's two digit jersey number, ie. 01-99. I then upload them to SmugMug with the intent of allowing viewers to use the "search" function to view photos of only their player. Unfortunately, the SmugMug search engine ignores any caption that has 2 or less characters. I would like to append all my football captions in Lightroom 3 with an additional identifier to lengthen the caption so it will become searchable, for example append the "01" to "Titans01". I don't care if identifier is at beginning or end. I just want to be able to append an entire album at one time, not just one at a time.
View 2 Replies
View Related
Feb 22, 2014
I found that render effects will utilize GPU and fans are working. Normally a few minutes will complete the work.
However, when I render in and out, it takes one to two hours and fans don't work as fast as when render effects, which means that render in and out is not using GPU I suppose.
View 4 Replies
View Related
Oct 14, 2011
i bought VSP4x about a month ago to try to get back into video editing (was originally using Media Studio on my XP machine but it isn't supported on Win7) and was working fine with video acquired through the method capture -> edit - > share. but once i started bringing in videos from other sources it started going bonkers. one source i get my video from is a screen capturing program called Bandicam. it creates standard Mpeg encoded VBR AVIs. i would editing my footage cut, and snip where needed. add some text and then render. as soon as it hits 1% of rendering it will come back with a unspecified error and give me a dump files to send to tech support. i then proceed to find tech support but was unable to find any sorts on the website that wasnt going to cost me $20 just to send an email. i searched everywhere i can after that for a solution. couldnt find one.
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): Program: Bandicam Files:.AVI(Mpeg encoded VRB) size:200-300MBs
What devices are involved and their mode of connection?:There are no devices.
Project Properties (important):
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Output format (file, DVD, VCD, SVCD):Share-> upload to web-> youtube-> MP4HD 16:9
Output Properties (cogwheel in lower left of burn screen): Standard for youtube MP4 HD 16:9
PAL or NTSC: NTSC
Error Codes (if any): unspecified error code
View 6 Replies
View Related
Jan 28, 2014
Edited my footage in a sequence in normal size.
I wanted to make it widescreen, so I made a new sequence in 1920x810.
I then copy pasted my edit into the new sequence and started rendering.
The render window kept adding frames to render, and the percentage jumps and very slowly adds 0.1% into the progress.
I tried choosing a smaller amount to render, same problem still persists.
Why does it now want to render normally? Why does it add frames to render all the time?
View 3 Replies
View Related
Feb 6, 2014
If I have a render in progress and I alt tab or to premiere or open premiere/media encoder, the render in after effects wit hthe "happy ring of success" noise. but the file is incoplete and the render has stopped part way done.
OSX maveriks.
current creative cloud versions (7/2/2014)
View 2 Replies
View Related
Mar 7, 2014
I am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
View 4 Replies
View Related
Dec 12, 2013
Any MPEG2 i render in Premiere Pro CC exports in low quality (Grainy and flickers). Even at 1080p and a CBR of 20. I thought i'd wait for the next update for premiere pro CC which came out today with no luck.
[URL]
24GB of RAM
i7 X990 Processor
NVIDIA Quardro 4000
Windows 8.1
View 1 Replies
View Related
Oct 5, 2010
I've been experimenting with syncing audio and video in a precise way (something like URL....), and have found that in every output format except "MPEG Optimizer...", the sync is a little off... or at least different than the preview.
Through experimentation, I have found that you can be off by one frame and not really notice, but two frames and things look "amateurly" synced. Given that there is one frame leeway, I figured that rounding due to frame rate differences are accounted for, but this is not the case.
In some cases, I have also noticed transition and F/X changes, depending on the output format. For example, I have an image of a statue with "AutoSketch" applied. In the preview, everything looks wonderful. In HD MP4 output, the statue is drawn top to bottom, then the base of the statue disappears and is re-drawn. In DV and WMV format, the drawing is noticeably different, even though the resolution is the same.
What gives? If we can't count on the output to be like the preview, then all that time spent making a killer sync is just wasted
View 2 Replies
View Related
Jul 30, 2012
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
View 1 Replies
View Related
Aug 31, 2011
Sometime with some scenes, I have this trouble :
-when I render my beauty pass in TIF 16bits with render elements and when I leave MAX set my render-elements output files automatically, MAX use the initial name of the output beauty pass. So technically, It is suppose to make a couple of file with the same format and the same name.
-ok, I presse render to Backburner and I wait.
-Now my render is done, I go check my output files. And, sometimes, without constancy, my beauty pass is a TIF 16bits but my passes are in gray-scale or in 8bits or 16bits in random.
If I restart the job on Backburner, maybe it fix this problem, maybe not.
The unique thing I find to fix that is to set all my passes manually. but it's a pretty heavy process.
View 2 Replies
View Related
Apr 13, 2006
I have to create several large format banners (3' x 7') in a 1:1 printing ratio.
When I type in text (at approx. 145 pt type), half or more of it disappears when it is rendered. I have tried reducing the text amount by line, but that hasn't helped. I don't want to to every single word as a separate layer either.
What am I doing wrong?
I am using PS6 in a Windows XP OS and I have 2 GB of RAM.
The printer we are using specifically asks for a "Photoshop file saved as a JPEG".
I am desparate on this as I am under the gun on this project - short notice.
View 2 Replies
View Related
Jun 14, 2012
It seems that you can only decide on your intermediary at the point of first setting up the project? Is this true? Wouldn't it be a good (very good?) idea to be able to change this once you have embarked upon the project? It seems to me that you might want to use the ProRes codec when you are cutting and messing about with your project and then switch to DPX when you want to be careful about the quality of the render files?
Thus you may want to be creative in the render-room saving ProRes format when you can build up lots of decisions, but then switch finally over to the DPX format when you are closing in upon the final project. The current system (unless I have missed something) means that one you have chosen your intermediary render format, you are stuck in that project in that format?
TO mention Liquid for the second time today, you used to be able to right click in the timeline and switch the timeline render format (everything from dv to uncompressed). It could take any codec, frame rate and frame size but then you could decide and change your mind on the render format that you wished to use.
Smoke 2012/2013 on MacBookPro 2.6ghz i7 (mid 2012) with Nvidia650M, 16gb RAM, 768GB internal SSD, Thunderbolt Promise R6, AvidArtist MC-Color & MC-Transport, Intuos4 medium, 24in Apple Mon. Ageing 2009 Mac Pro with ATI5870, but want a 2013 one ;(
View 3 Replies
View Related
Jan 30, 2014
It randomly popped up on my program window and I cannot get rid of it.
View 1 Replies
View Related
Dec 11, 2013
I've been having trouble lately using Warp Stabilizer in Premiere CC 7.1. I had used the effect many times successfully, then it suddenly stopped working. It analyzes the clips without problem, however it seems to get stuck on the "Stabilizing" phase. It just sits there. As I try to playback the clip in the timeline, it simply shows up as black video in the viewer. The space above the clip on the time line is yellow. I've done a full uninstall and no luck. I don't have any other problems in Premiere Pro CC 7.1 right now.
View 3 Replies
View Related
Nov 2, 2013
Last week, I was editing a multicam sequence (in Premiere 7.0.1) and I found it always very usefull to see the waveform. After upgrading and choosing Sequence -> Render Audio, the CTI jumps to the beginning of the timeline and starts playing and nothing more. No rendering at all.
View 14 Replies
View Related
Mar 17, 2014
How can I export a video from Premiere Pro CC in .mov format suitable for posting on the Amazon bookselling site?
View 2 Replies
View Related
Feb 1, 2014
I can't find the location of the videos I export/render on my computer. How to change the location of where to save them. I used premiere elements before I used premiere pro. The interface changed on pro and I'm falling way behind on projects.
View 14 Replies
View Related
Mar 4, 2014
I am trying to render and export files after using the fast color corrector. After using this effect, some, but not all of my clips don't render and the following message pops up: ERROR COMPILING MOVIE.
I saw online that this happened to ther people too and it seems like it is a bug in CS6 itself. I need to do the color correction.
View 3 Replies
View Related
Mar 2, 2014
it included some bad language, but that can be censored. It's nice to know Adobe only cares about their image rather than solving their users' issues with the software that they bought. No wonder people are switching sides to Avid or Apple. But that's hardly suprising in this marketing world.
Ok so basically I've been working on a project similar to all the other projects in the last months. Nothing fancy: a simple green screen keying, some added titles and a bit of Colour Correcting and audio EQ.
Everything looks fine in the project: both reference and monitor ouputs looks pefectly fine. Until the actual render is reviewed and then the **** hits the fan! I've added screenshots below. Using latest version of Premiere on OSX, only using native plugins and exporting as H.264 MP4 optimised for Vimeo streaming.
View 10 Replies
View Related
Dec 15, 2013
I have a few hours of a documentary project originally recorded in S-VHS that I wish to edit it in Premiere Pro.
What would be the best video format to have it transferred to?
View 5 Replies
View Related
Feb 4, 2014
I am thinking of buying a new Sony camera (finally moving from mini-dv tape!). The HXR-NX3 records video using the AVCHD 2.0 format. Will I be able to import directly into CS 6 without doing any conversions? And will that give me HD video suitable for recording to blu-ray?
View 1 Replies
View Related
