VideoStudio :: Converting PAL To NTSC In X3

Dec 13, 2010

Family DVD - Footage has been shot in the UK (PAL camera) and edited in X3 - everything at 25 fps. I've managed to render a new mpeg2 file of the completed work n NTSC (29.97 fps). All of this in X3. I can see it's 29.97 by looking at the Properties of the new file.

But how to get this file onto a DVD at 29.97? I've tried bringing the 'NTSC' file into MovieFactory SE but I can't then get the Project Settings to show NTSC - only PAL.

I've set the Disc Template Manager to NTSC but if I then look at the Project Settings it's at 25 fps and I can't change it. If I go back to the Template Manager it's showing PAL again!!! I'm sure I didn't have any of this trouble in X2!!

So how can I burn a good quality DVD in NTSC format from my PAL project?

View 14 Replies


ADVERTISEMENT

VideoStudio :: Converting NTSC To PAL?

Apr 18, 2013

Looking at the differences of frames per second and vertical lines of NTSC and PAL I am wondering if video recorded in AVCHD NTSC can be successfully converted to PAL or will there be a noticable difference in picture height and speed?

View 14 Replies View Related

VideoStudio :: Change NTSC To PAL

Apr 30, 2010

I just bought VS X3 and when i try to save a file all the file types are NTSC. I select:-

create video file >Blu-ray>

then all options are prefixed with NTSC but being in the UK I need PAL?

View 14 Replies View Related

VideoStudio :: PAL Or NTSC Presets

May 23, 2011

I wish to only use PAL formats. Even though my original video files are always PAL the preset file formats default to NTSC. I have to use the Custom Format option every time. How can I get all the presets to default to PAL not NTSC?

View 2 Replies View Related

VideoStudio :: Convert From PAL To NTSC

Nov 9, 2013

I usually produce simple slideshows on DVD from jpg files. These have always been PAL for use here in the UK. I now need to produce a version of one to send to people in the United States.

I can always test mine on my own DVD player/TV but I won't be able to test these and don't want an embarrassment of a Christmas present that doesn't work. Is it the case that I only need to change PAL to NTSC in the Project Properties, burn the DVD and everything will work?

View 4 Replies View Related

VideoStudio :: Transfer NTSC DVD To PAL

Jan 26, 2012

I am in the UK and have been asked to transfer a NTSC video tape to a PAL DVD. I can do this easily as I have a NTSC video and converter, and have done this many times, but they also want a DVD to send to the USA in NTSC format. I was going to play the tape a second time without the converter but Is it as easy as just changing the setting in Videostudio 10 from PAL to NTSC or do I have to change anything else.

View 1 Replies View Related

Photoshop :: Converting To NTSC Canvas Or Changing Current Canvas Size?

Sep 13, 2012

I'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to  a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.

View 1 Replies View Related

VideoStudio :: 5 - Missing Settings For Other Than NTSC And PAL?

Feb 12, 2013

I have been a user of previous versions of VS...but my last version was VS12 because I didn't like version 3 or 4. Finally I am trying Pro X5 on a trial. I completed a project in Pro X5 but now I want to save it out to my computer. The problem is that when I want to save it I am missing my compression options. My standard procedure was to go --> Share --> Save File --> Custom --> Options --> Compression and I could choose from 8 different Media Types...Now, in Pro X5 I only get 2 compression types...NTSC and PAL..

Here are some screenshots...

Version 12:

Version X5:

I have them both currently installed at the moment. Obviously, only running one at a time

View 2 Replies View Related

VideoStudio :: Change From NTSC To PAL Without Reinstalling?

Feb 29, 2012

Question says it. Is it possible to change VS from NTSC to PAL or vcvs without having to completely reinstall?

View 4 Replies View Related

VideoStudio :: PAL To NTSC Contrast / Shimmering?

Feb 12, 2008

I recently bought a Sony DCR-HC96E (PAL) video camera. I also have an older Sony DCR-TRV330 (NTSC) which I have used for years.

I recently took some video of a field partially covered with snow. When that clip was convered from the original downloaded PAL Widescreen AVI format to MPEG format for inclusion on an NTSC DVD I noticed lots of "shimmering" or wavering in the high contrast diference boundries between snow patches and ground. Further examination shows that effect is also along other contrast boundries during a subsequent snow mobiling trip.

By contrast when I converted to MPEG for use in a PAL DVD I do NOT see this effect. And, I do not recall seeing this when I used to convert from NTSC AVI downloads to PAL for DVD's.

View 13 Replies View Related

VideoStudio :: Change Edited Video From NTSC To PAL

Apr 7, 2011

I have created and burnt a video and find that after burning it plays fine on a computer but not on television. Opening the video in Pro X3 and checking the Properties I find that it is in NTSC profile. Obviously not a lot of use in the UK. The television tells me that the DVD is an incorrect DVD, which I would expect if it's burnt for viewing on a computer or in NTSC format.

How can I change this to PAL DVD? When saved it is saved in Corel VS, which I would expect. When I go into the Library to obtain the video there appears nowhere where I can change it to PAL.

View 2 Replies View Related

VideoStudio :: X5 Installs In NTSC When PAL Is Selected In Installer

Jan 29, 2013

I am trying to install a (boxed) version of VideoStudio X5 Ultimate as a fresh install. However, although I select either United Kingdom or PAL/SECAM as the TV standard, it installs with the NTSC settings as default.

I have used the VSX5_cleaner to ensure everything is removed, rebooted and re-run the installer but it seems to install the same every time.

We have two laptops (identical configuration) and it works perfectly on the first one.

I am installing logged in as the local administrator.

I can't just use the current settings as it is trying to download video from a Sony HVR-HD1000E camera at 30fps that has been recorded at 25fps...

View 1 Replies View Related

VideoStudio :: Preference Tab Edit Color Filter (PAL And NTSC)

Dec 17, 2010

I have Corel Video Studio Pro X3

I live in Europe so that's PAL. But I also want to make DVD's for my family in the USA, and that is NTSC. I know I can choose to burn a DVD in PAL or NTSC at the DVD factory.

What I do NOT understand is: When I want to edit my video files I can choose for PAL or NTSC at Settings>Preferences>edit color filter. What does this setting do?

Also when I check Project Properties it always says PAL, even when I choose NTSC at Settings>Preferences>edit color filter. How I can edit video files and then burn DVD's in Pal & NTSC format without having to make separate editing for both formats.

View 8 Replies View Related

3ds Max :: Reverting To NTSC When NTSC Is NOT 30 Fps

Mar 17, 2013

The Time Configuration dialogue isn't remembering when I set 'Custom' to 30. If I close and reopen the dialogue after setting 'Custom' to 30, it reverts to NTSC. If I set it to 3 or 4, for example, it sticks. Why is setting it to 30 reverting to NTSC when NTSC is NOT 30 fps?

View 2 Replies View Related

VideoStudio :: Converting 2D To 3D In X4?

Mar 17, 2011

I have been using VS since version VS5 and lately VS X2. Now I have upgraded to VS X4 Pro, the box version.

The installation went well and am just performing some tests. I was curious in the new facility with converting 2D to 3D.

I followed the manual and tried with one clip and went to the Share step where I selected Create videofile, selected 3D and DVD as well as AVCHD. My clip was in full HD. I went to the Options menu where I ticked 3D Simulator and Anaglyph.

The result after rendering however was only a white screen but with the sound from the clip. When rendering the same clip to DVD or AVCHD in the "normal way" everything was OK.

View 14 Replies View Related

VideoStudio :: X5 - Converting DVD To MP4

Dec 6, 2012

As Microsoft started to eliminate DVD support in his flagship OS I'm thinking about converting DVDs content to a more modern standard (e.g. mp4 (H.264)).

In X5 SP1 I'm facing an unexpected problem. There is no matching resolution. DVDs use 720x480 (NTSC) or 720x576 (PAL) but in the convertor I cannot find matching resolution in mp4's container for H.264 MAIN nor BASELINE
nor HIGH profile encoders.

Is this a X5 implementation error or a 'feature' dictated by a standard.

View 6 Replies View Related

VideoStudio :: Converting DVD Files In Pro X4

Nov 20, 2013

I copied some videos to a DVD using a Panasonic DVD recorder and was trying to put them on my computer for storage and playback. It was three TV shows in VOB format with IFO files in the folder as well. Initially, the only way I could get anything to play was with the video TS file with windows media player, as my computer does not recognize VOB. This doesn't really work as they need to be stored separately given that they are different shows. Further complicating it is that instead of 3 VOB files, there are 5, so the episodes are spilt in the middle of some of them.

I came across this old thread viewtopic.php?f=1&t=19926&view=previous . I can't import from DVD because it reports it's not a valid format. I was able to rename them to mpg files, but have some issues. When played individually with windows media player, file 01 only plays 5 minutes of the video (About 20-25 minutes are just missing despite being over 1 gig) and the actual video is missing, just the audio plays (the video for that 5 minutes does play in vs x4, it is complete and works fine when playing from the video_ts file in windows media player). The others work fine. Each episode is about 42 minutes. Also noted that 01 is listed as being half of the resolution of the others.

When I try combining files and saving as various mpg options or flv, I either lose audio altogether at certain parts, or it is badly delayed/mismatched and the part that is not showing when I play file 01 alone is missing from the combined video as well. I also tried it in windows moviemaker, but it can't play the files at all.

View 9 Replies View Related

VideoStudio :: Converting From MP4 To MPEG2

Dec 17, 2013

I have a mp4 video with frame size 1280*720 and data bitrate 4442 kbps and I want to convert it to mpeg2. if I convert it using the simple way in vs pro x6 through dvd then mpeg2 it will convert it with higher size and higher bitrate. What data rate should I put using custom then mpg files to keep same quality and size.

View 4 Replies View Related

VideoStudio :: Converting 4.3 To 16.9 Output

Jan 8, 2012

Is there a way that you can convert a 4.3 import to a 16.9 output? I have imported a musical from a disc which is recorded in 4.3. I would like to output this as a widescreen video. I have tried putting in on the overlay track which gives a better output result but still has the borders each side.

View 5 Replies View Related

VideoStudio :: Converting 1920x1080 To 1920x 800?

Apr 11, 2013

I've shot HD video on a Sony SR11 in .m2ts formatTS(AVC) and 1920x1080 resolution.

I'm looking to edit these short videos in a project with a format of 2.35:1 or 1920x800 as a finished project.

I'm using video studio pro4x right now but willing to upgrade if I need to to get this resolution.

View 5 Replies View Related

VideoStudio :: Burning / C​converting MOV / MP4 Files To DVD

Apr 3, 2011

I'm trying to burn +/- 1gb .mov/mp4 files to dvd to watch on a dvd player hooked up to a tv. I tried burning the mov/mp4 files directly to dvd but my dvd player isn't able to read them. VideoStudio 12 was included on my computer, will it convert mov/mp4 files to a format that can be burned to a dvd that I can watch on my tv?

I don't need to edit the files, just burn them to dvd in the highest quality possible to watch on my tv. If it will, are there any tutorials on how to do this?

View 6 Replies View Related

VideoStudio :: Best Video Bit Rate When Converting VHS?

Jun 28, 2011

I am converting some video from VHS tapes starting by copying my VHS tapes to my DVD player/recorder's harddisk. I then intend to copy from the hard disk to DVDs and don't mind copying at the maximum resolution. I will then import those DVD's into VS and edit. What I want to know is what is the maximum bit rate I should use so that I don't loose any resolution (my VHS is bad enough as it is) but also fit as much as possible to a single sided DVD. As the resolution of VHS is nowhere as good as DVD I would have thought that it would be a waste of space to output at say 7500kbs.

View 14 Replies View Related

VideoStudio :: Converting MTS To WMV HD 1080 30p (16x9)?

Jan 19, 2013

I am having issues converting AVCHD Video (.MTS) videos to WMV HD 1080 30p. (16x9) When I try to use this default option the final result never comes out 16x9 widescreen. The original is 16x9 widescreen. (In the settings tab it is checked to be 16x9).Now if I use the WMV HD 720p, it will be 16x9 widescreen (using same original video).

I am pretty sure this did work fine when I first installed this software, but something has changed...and I know I have not touched any settings at all.

View 5 Replies View Related

VideoStudio :: Pro X3 - Lose Audio When Converting SWF To AVI?

Aug 13, 2011

I am attempting to pull .SWF files from a CD and edit in Pro X3. It is a training video that works with Explorer. Whenever I convert the files to AVI, Mpeg, etc., I lose the audio.

View 9 Replies View Related

VideoStudio :: Import XMF Files Into Video Pro X5 Without First Converting Them?

Jan 12, 2013

Can I import XMF files into Video Pro X5 without first converting them? I cannot find the answer to this on the sales information. Also is there any way to import those XMF files into my current version (Video Pro X2).

View 9 Replies View Related

VideoStudio :: PC Crash Writing DVD In Converting Video Of The Title

Dec 9, 2011

I upgraded to VS X4 SP1 having successfully used its predecessors for many years. However, I now cannot burn a DVD as it fails in the Converting Video of the title (001/001] step.

My clips are captured by firewire from a Sony camcorder in DVI format. In this project I am using transitions, moving menus, 12 chapters and titles extensively.

My workflow is as follows: Share, Create Disc, DVD, Use first clip as introductory video is unchecked (patched dll file for Unknown Error installed), use Smart Scene Menu, Burn. Timeline is 1:26:54:22 so I select Yes to fit to DVD. PC crashes anywhere between 6 and 18 minutes later. Do not convert compliant MPEG files is checked.

I have tried various other things and can successfully burn a video under 30 min on the timeline without and transitions, chapters or menus.

My project properties are Microsoft AVI, PAL 25fps, 24 bits, 720x576, 4:3, Lower Field First, DV Video Encoder - type1

Clip properties are the same with 32000kHz, 12 bit Stereo audio as per attached file.

The converting video of the title step takes up to 30 min to complete for a 20 - 30 minute project, so seems like a proportionally high time of total job.

View 1 Replies View Related

Photoshop :: New Image Video Preset Only NTSC But Need PAL / How To Change

May 4, 2012

I am creating titles for a 720 PAL video (25fps) for the first time.  Photoshop only has a default of NTSC 29.97 and no option for 720 PAL 25fps.  How do I change this?  I'm running Photoshop CS5 extended.

View 4 Replies View Related

VideoStudio :: Converting MOV Files Into DV Or MPEG Files To Edit

Jul 21, 2011

How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.

View 9 Replies View Related

Photoshop :: NTSC Safe Guide In Photoshop 7?

Mar 13, 2006

Where, if anywhere, in Photoshop 7 can I turn on NTSC Broadcast safe guides. Or do I have to get fancy and measure it out ruler style.

View 3 Replies View Related

Photoshop :: Converting For The Web

Oct 23, 2012

Whenever I want an image that I have edited in Photoshop to look good in a browser, I have to convert the image to my monitor's profile for it to look the way it did in Photoshop.  So, the workflow is 1) finish editing 2) convert to profile for my monitor's profile 3) Save for web... 
 
Color mgmt makes my head swim but I sort of see why this is.  But my question is, most places on the web, I see people are just converting to SRGB for the web and I will say that that does not work for me at all.  Does that mean they are talking about converting the color space and not the profile?
 
I admit that my monitor in its uncorrected stated is way off.  That is to say, after I run the Spyder software my monitor colors look a LOT different.  I shouldn't think this would matter but I'm just throwing it out there.  I am a Windows user.
 
The reason I am asking this is because when I try converting images on export in LIGHTROOM to my monitor profile it does no good.  The image looks terrible in the browser.
 
Am I missing something?  Do I have a setting set wrong somewhere or does everybody have to convert to the monitor profile to get stuff to look right in a browser.

View 5 Replies View Related

Photoshop :: Converting To PDF?

Mar 5, 2012

I have a milti picture file on photoshop that is too big to copy to a single cd.  Is there a way that I can convert this to a pdf slideshow that will fit?

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved