I am creating titles for a 720 PAL video (25fps) for the first time. Photoshop only has a default of NTSC 29.97 and no option for 720 PAL 25fps. How do I change this? I'm running Photoshop CS5 extended.
View 4 RepliesI have created and burnt a video and find that after burning it plays fine on a computer but not on television. Opening the video in Pro X3 and checking the Properties I find that it is in NTSC profile. Obviously not a lot of use in the UK. The television tells me that the DVD is an incorrect DVD, which I would expect if it's burnt for viewing on a computer or in NTSC format.
How can I change this to PAL DVD? When saved it is saved in Corel VS, which I would expect. When I go into the Library to obtain the video there appears nowhere where I can change it to PAL.
Why is there a 'lightroom video preset' under the preset tabs. yet when i open a video file in lightroom and go to the develop modue it says video is not supported in the develop module?
View 2 Replies View RelatedI just bought VS X3 and when i try to save a file all the file types are NTSC. I select:-
create video file >Blu-ray>
then all options are prefixed with NTSC but being in the UK I need PAL?
Question says it. Is it possible to change VS from NTSC to PAL or vcvs without having to completely reinstall?
View 4 Replies View RelatedThe Time Configuration dialogue isn't remembering when I set 'Custom' to 30. If I close and reopen the dialogue after setting 'Custom' to 30, it reverts to NTSC. If I set it to 3 or 4, for example, it sticks. Why is setting it to 30 reverting to NTSC when NTSC is NOT 30 fps?
View 2 Replies View RelatedIn Lightroom 4 we could create custom video presets for slideshows [URL] ..... But when I try to use the presets in Lightroom 5 they do not show up (even though on the dialogue box for exporting a slideshow they are still called video presets).
how to write a custom slideshow video preset for Lightroom 5?
I have a 5" x 7" (landscape style) image that I want to crop in Elements 9. I'm using the Guided mode on the Edit tab of the program. When I use the pulldown menu and I see the 5 x 7 crop box size that I want to use, I click it. But the crop window that appears, is 7 x 5 (portrait mode) rather than 5 x 7 landscape mode. I can work around this by changing my crop box size selection on the pulldown menu to No Restriction, but I'm then just guessing that I'll get precisely the 5 x 7 ratio that I want. How can I change the crop box from portrait style to landscape style so that I can crop my image 5 x 7 rather than 7 x 5?
View 5 Replies View RelatedIs there any way with a click of a button by using LISP, it will change all the selected object to be changed to a pre-set layer...
Example, after i select a certain entities in a drawing, with LISP, it will change all the object to layer "0"?
Additionally, u also need it to change all selected entities that are in "dashed" linetype to be change to "hidden" linetype..
I use Illustrator CC.I have made a custom Image Tracing Preset and want to use it on a folder containing a sequence of pictures I want all to vectorize automatically. Programming an Action isn't an option as the Action recorder doesn't record which tracing preset is used for image tracing. I found I can use the pre-installed Image Tracing Script [URL] in which I only need to specify the correct number of the Image Tracing Preset. And that became a big problem.
View 2 Replies View Relatedas a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
When I load an image either a jpeg or psd file then make a layer copy I am unable to apply a preset action to this. Either a default action or one of my own on a Mac OSX running Lion. This did not present a problem in CS5 and I am wondering if I've missed something basic?
View 10 Replies View Related1. How do i restore a deleted preset from the Image Trace drop down panel. I accidentally deleted one of them and would like to restore it.... naturally . Is there anyway short of doing a complete reinstall?
2. I notice that when I scan some art, i get a double path. Meaning there's a path on both sides of the inked line. How do I get it to make one line/path for the inked line? IOW a single path with its thickness defined by the stroke weight.
Looking at the differences of frames per second and vertical lines of NTSC and PAL I am wondering if video recorded in AVCHD NTSC can be successfully converted to PAL or will there be a noticable difference in picture height and speed?
View 14 Replies View RelatedI wish to only use PAL formats. Even though my original video files are always PAL the preset file formats default to NTSC. I have to use the Custom Format option every time. How can I get all the presets to default to PAL not NTSC?
View 2 Replies View RelatedFamily DVD - Footage has been shot in the UK (PAL camera) and edited in X3 - everything at 25 fps. I've managed to render a new mpeg2 file of the completed work n NTSC (29.97 fps). All of this in X3. I can see it's 29.97 by looking at the Properties of the new file.
But how to get this file onto a DVD at 29.97? I've tried bringing the 'NTSC' file into MovieFactory SE but I can't then get the Project Settings to show NTSC - only PAL.
I've set the Disc Template Manager to NTSC but if I then look at the Project Settings it's at 25 fps and I can't change it. If I go back to the Template Manager it's showing PAL again!!! I'm sure I didn't have any of this trouble in X2!!
So how can I burn a good quality DVD in NTSC format from my PAL project?
I usually produce simple slideshows on DVD from jpg files. These have always been PAL for use here in the UK. I now need to produce a version of one to send to people in the United States.
I can always test mine on my own DVD player/TV but I won't be able to test these and don't want an embarrassment of a Christmas present that doesn't work. Is it the case that I only need to change PAL to NTSC in the Project Properties, burn the DVD and everything will work?
I am in the UK and have been asked to transfer a NTSC video tape to a PAL DVD. I can do this easily as I have a NTSC video and converter, and have done this many times, but they also want a DVD to send to the USA in NTSC format. I was going to play the tape a second time without the converter but Is it as easy as just changing the setting in Videostudio 10 from PAL to NTSC or do I have to change anything else.
View 1 Replies View RelatedI am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
But the issue is when you select the crop tool and enter a custom constraint and crop
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
I have been a user of previous versions of VS...but my last version was VS12 because I didn't like version 3 or 4. Finally I am trying Pro X5 on a trial. I completed a project in Pro X5 but now I want to save it out to my computer. The problem is that when I want to save it I am missing my compression options. My standard procedure was to go --> Share --> Save File --> Custom --> Options --> Compression and I could choose from 8 different Media Types...Now, in Pro X5 I only get 2 compression types...NTSC and PAL..
Here are some screenshots...
Version 12:
Version X5:
I have them both currently installed at the moment. Obviously, only running one at a time
I recently bought a Sony DCR-HC96E (PAL) video camera. I also have an older Sony DCR-TRV330 (NTSC) which I have used for years.
I recently took some video of a field partially covered with snow. When that clip was convered from the original downloaded PAL Widescreen AVI format to MPEG format for inclusion on an NTSC DVD I noticed lots of "shimmering" or wavering in the high contrast diference boundries between snow patches and ground. Further examination shows that effect is also along other contrast boundries during a subsequent snow mobiling trip.
By contrast when I converted to MPEG for use in a PAL DVD I do NOT see this effect. And, I do not recall seeing this when I used to convert from NTSC AVI downloads to PAL for DVD's.
I am trying to install a (boxed) version of VideoStudio X5 Ultimate as a fresh install. However, although I select either United Kingdom or PAL/SECAM as the TV standard, it installs with the NTSC settings as default.
I have used the VSX5_cleaner to ensure everything is removed, rebooted and re-run the installer but it seems to install the same every time.
We have two laptops (identical configuration) and it works perfectly on the first one.
I am installing logged in as the local administrator.
I can't just use the current settings as it is trying to download video from a Sony HVR-HD1000E camera at 30fps that has been recorded at 25fps...
I have Corel Video Studio Pro X3
I live in Europe so that's PAL. But I also want to make DVD's for my family in the USA, and that is NTSC. I know I can choose to burn a DVD in PAL or NTSC at the DVD factory.
What I do NOT understand is: When I want to edit my video files I can choose for PAL or NTSC at Settings>Preferences>edit color filter. What does this setting do?
Also when I check Project Properties it always says PAL, even when I choose NTSC at Settings>Preferences>edit color filter. How I can edit video files and then burn DVD's in Pal & NTSC format without having to make separate editing for both formats.
i'm looking for a possibility to change the thumbnail for the videos that i have rendered with photoshop cs6. How i can select or change the thumbnail for a videos that isn't shown for example in bridge.
View 3 Replies View RelatedI added a filter to my video but it only lasts for a few frames. There are little marks shown where I added it in the Altered Video section of the timeline. How do I apply a filter or effect to the entire clip?
Also when I ad a filter such as Lens Correction, it only lasts for a few frames..How do I get it to remain?
Where, if anywhere, in Photoshop 7 can I turn on NTSC Broadcast safe guides. Or do I have to get fancy and measure it out ruler style.
View 3 Replies View RelatedI'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies View RelatedI have a video clip in 4:3 format that I want to insert in a video project in 16:9 (project properties set at 16:9). How could I do that?
I know that there will be black bands above and below the converted project. However, when I inserted the 4:3 video clip in the 16:9 project, it stays in 4:3.
How to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedI thought someone might be interested in a web page I just finished. I wanted to embed a video within a picture so this is what I did: The background was sliced using image ready and a small video was inserted in the appropriate cell. The tricky part was to encode the video to be the same size as the sliced cell.
View 6 Replies View Related