VideoStudio :: Pro X5 - Videos (MPEG4) Automatically Muted?
Jun 17, 2012
I'm using the 30-day trial version of Corel Videostudio Pro X5.
The problem is that all the videos (all files are MPEG-4) I add to the library are muted, I can't hear anything from the audio when I play it. It's the same problem when I add the clip to the timeline, it shows that the clip is normal & the audio should be fine but nothing can be heard. I've tried purposely muting it & then unmuting, I've also tried splitting audio, I've tried all possible audio settings I've found in the program but everything I've tried has no effect. I've checked a million times that the audio on my computer is on, & the videofiles play normally with perfect audio on every media player I have, but I can't hear anything in the editing software.
Is there a setting that makes the files automatically mute & I haven't noticed it, or doesn't Corel Videostudio just support MPEG-4, or is this like a weird glitch in the trial version?
View 5 Replies
ADVERTISEMENT
Apr 26, 2011
I have a problem with Corel Video Studio Pro X4, I have a couple of short clips (avi format), put together in a project. Most of them I want to use muted, for the exception of 1 clip, with this one I need the audio. Only... when I play the whole bunch in project mode, all of my clips are automatically muted, also the one where I don't want it to be. It's getting quite annoying, I'm new to the program and can not find a solution for this problem. I tried to unmute the clip, but no luck. When I play the clip separately in clip mode, the audio is fine..
View 3 Replies
View Related
Mar 1, 2011
I am currently trying out Corel VideoStudio Pro X4,when i insert different clips into the timeline, as the project plays the audio doesn't start instantly, and there's almost like a 1sec delay before the audio appears.
I seen that there was audio fade in/out options, which can be set to 1-999 (but no 0)
View 4 Replies
View Related
Nov 21, 2011
I used many clips capture from a Sony HD Camorder. Everything's working fine in Video Studio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back. I tried to slip the sound from the clip, remove the transition, nothing work.
I updated all the drivers...I tried on an other computer...still the problem.
View 1 Replies
View Related
Nov 7, 2011
I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.
View 4 Replies
View Related
Jun 14, 2010
I'm editing MPEG-4 PAL HD files from a Samsung Cam. After editing, I want to create a MPEG-4 HD file with the same profile (1920x1080 at 25 fps). Choosing MPEG4-HD profile, 30 fps files are generated. Also defining a MPEG4 custom profile with H.264-MAIN type and 1920x1080 resolution, the fps is locked at 30 (at lower resolutions, like 1280x720 the frame rate can be modifies). Ist it a constraint of H.264-MAIN video type ot a bug ?
Please consider that VS X3 is installed for PAL Video System and choosing Bluray profile or AVCHD profile PAL HD files 25 fps are generated.
View 9 Replies
View Related
Jan 14, 2011
I tried to set my project as MPEG4 with resolution 1920x1080 and bitrate 30000 but I can not find how to do it.
Even I set to another format like M2TS it can set to 1920x1080 but the bitrate is only 18000.
View 4 Replies
View Related
Sep 15, 2011
My evaluation copy of VideoStudio X4 crashes whenever it tries to write an mpeg4 file. I get a message to e-mail the DMP file but thee is no e-mail address given or found on this site.
View 6 Replies
View Related
Jan 29, 2013
My first video camera was a 30 fps NTSC and I output my videos as MPEG-4 HD files. Then I bought a new PAL video camera. To be safe I uninstalled my copy of VSProX4 and reinstalled it, checking the PAL option. However, when I created my first video clip using the MPEG-4 HD option in the drop down list, it created a file at 30 fps and not surprisingly the panning was very jerky. I uninstalled the program and ticked the option to uninstall all personal data. I also deleted the VSProX4 folders from user/user/my documents/. When I reinstalled the program all my saved projects came up on the screen and it still wants to make MPEG-4 files at 30 fps.
Presumably I should have deleted the Corel folder from the progam files folder after I'd deleted the program to get rid of all personal settings. Anyway, my question is this: is it actually possible to create MPEG-4 files at 25 fps (or preferably at 50 fps as this is what I am shooting)? If so, what do I have to do to get VSProX4 to create them? Is there some way to edit the MPEG-4 HD option in the drop down list from Create a Video File? If not, is it possible to make a template for MPEG-4 HD at 25 or 50 fps? The reason I'm keen to get this right is that I can play MPEG-4 HD files from a USB stick plugged into my TV. The only other way I can watch them on TV is to create AVCHD files and write them to a DVD.
View 9 Replies
View Related
May 22, 2012
My video won't share as a MPEG-4 HD. Here are the steps I take:
1. Click the "Share" Tab
2. Click "Create Video File"
3. Click "MPEG-4"
4. Click "MPEG-4 HD
5. Select the destination folder for the output
6. Click "Save".
The progress shows 0% and the progress bar goes away after fifteen seconds. I am sharing it as an MPEG-4 HD file because it will be placed on Youtube by someone else. I've probably done four of these projects the same way and they execute just fine.
Here's some more informtion:
Brand: Dell Laptop
HDD: 464GB; Used Space 153GB; Free Space 311GB
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
The video is a WMV2, 24 bits 1024 x768, 29.982 frames/second; Audio is windows media audio version 4, aspect ratio is 1.33 x 1.00. It is editable.
Here's how my timeline looks:
BLACK GRAPHIC = 2 SECONDS; TRANSITION (FADE TO BLACK) = 2 SECONDS; 10 SECOND CLIP; 3 SECOND CLIP; 00:42:33 CLIP.
View 13 Replies
View Related
Dec 8, 2012
I'm outputting DV-AVI files filmed on a Sony A1 in DV CAM as MPEG-4 videos for upload to Vimeo.The projects and source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I have been outputting to create movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
I'm using VideoStudio Pro X5 trial version.
Should I in fact select / have selected Lower Field First or is Frame Based OK? Is it safer / more reliable to select Lower Field First if that's the format of the source files? The videos seem to look OK on my laptop - don't know about Vimeo.
View 14 Replies
View Related
Nov 13, 2012
I have VS Pro X5. My footage is shot at 1920 x 1080p with 25 fps and I would like to produce mpeg4 video file with same parameters. I select custom settings, mpeg-4, H.264 high, frame size 1920 x 1080, but then fps is set to 30 and it is greyed out. Is this the limitation of VS? Is there any way to produce high quality HD with 25 fps?
View 6 Replies
View Related
Jan 10, 2012
I've rendered my project to MPEG4 and the audio has a light popping intermittently through it. I thought it might be caused by having multiple video overlays but only one track had audio enabled. I've now split out the audio and put it into it's own track but I'm still getting the poor quality sound.
View 12 Replies
View Related
May 30, 2012
I am using Corel VS X5. I have created MPEG4 files using Adobe Captivate and imported them into Corel. When I preview them, if I select Clip, the video looks fine. But if I preview the Project, the video is blurred. I first thought it might be caused by Smart Proxy but after disabling that feature, the problem persisted. I tried publishing the project to see if the final version would be ok. Still no luck. I tried the online chat and they suggested updating my viewers. I did as instructed and restarted my PC. Still no luck. My imported MPEG4 file is 1024x767 HD.
View 5 Replies
View Related
Dec 21, 2010
I recently tried to convert a 76 minute movie in mpeg 4 to mpeg 2 using the batch convert function. I first went into options and set the bit rate to 6100 kbps and the audio to Dolby 2 ch. stereo, with the bit rate set to constant. After the conversion had taken place, I found the results were excellent, except that only 38 minutes were converted. I tried it again, but still only 38 minutes and then it it finishes. Why won't it convert the full 76 minutes? The destination folder is on my "D" drive which is 1 TB, so there is lots of room.
View 3 Replies
View Related
Dec 5, 2012
Some of the movies I've been creating play OK in Windows Media Player but when you try and skip to a later part of the movie by holding and moving the toggle bar there is a 'Windows Media Player has a problem playing the movie' error. All the videos are the correct length and file size. Is there a problem with the files and would it affect how they play on Vimeo? Do I need to do them again? What can I do differently?
I have been creating movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
The source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I'm using Video Studio Pro X5 trial version.
View 3 Replies
View Related
Jul 16, 2011
I have recently 'downsized' to a sanyo xacti vpc-cg100ex camera to lighten my load on holiday! this produces mpeg-4 video files which I copy straight to a folder on my laptop from the SD card.
I can put these into the vs library and tranfer them onto the timeline and add trnsitions, titles etc. however VS is closing down with increasing frequency.(same files on my old xp machine seem to work ok albeit depressingly slowly!)
I have been searching the forum and wonder if I should be converting the files to some other format before doing any editing....does that involve using the share option straight after loading the files, and if so, how?
the properties of the original file are
Type mp4 video,
1920 * 1080,
59 frames/sec, bitrate 252,
audio sample rate 48kh
the properties given for the file on the timeline are
Format Mpeg-4 file,
Vid Type H.264 Main profile video, Upper Field first,
Attributes 24bits 1920*1080 16.9
Frame rate 29.970 frames per s
Audio type MPEG AAC 48000 hz 16 bit stereo
I have not been doing any video at all for quite some time so am definately somewhat rusty.
View 4 Replies
View Related
Jun 5, 2011
I downloaded the trial version of VideoStudio 4 Pro to try it out and I like the interface and the ease of use. My problem is that when I capture MPEG 4 files in the timeline and go to replay them, the sound and video are very choppy and the replay skips the whole way through.
I converted the MPEG 4 files to wmv, and the video was smooth but I lost some of the image clarity in the converting process. I don't think it's my computer because the MPEG 4 files play nicely on MediaPlayer - just not on VideoStudio.
View 8 Replies
View Related
Jun 13, 2012
I've created a dvd slideshow and also added two music tracks to it. I then used the original file and put two different music tracks on it. I hoped it would then play the slideshow twice and I would hear 4 music tracks (i also want it to repeat continuously).
When I used Share- Create Disc the disc played as I wanted it to on my computer, but when I play it in the dvd player at work it just plays the first video with the first two songs on and keeps repeating this.
Is there a tick box I've missed somewhere for it to play both the videos on a loop not just the first one?
View 4 Replies
View Related
Mar 20, 2013
I have been trying to add an MP4 video to edit in VSP. Every time I select the file, it would tell me that "The file had no video data" when it does.
I tried to install the Service Patch which is said to include imports of MP4 files, but it won't install. It tells me " The installed version of the application could not be determined"
View 14 Replies
View Related
Jan 17, 2011
How do you have 2 videos side by side in PD9. Look´s like this video from youtube:
View 3 Replies
View Related
Jul 6, 2012
I am trying to publish several videos to one DVD. I used the menu template and everything works fine after burning the DVD. The DVD auto plays and shows the main menu.
The previews are fine. When I click a video to start, it looks good.However, I cannot find a way to easily return to the main menu so I can start the next video. I tried adding navigation buttons but when I previewed the DVD, they did not work.
View 2 Replies
View Related
Sep 6, 2013
I am making some videos.. And i really liked the flashback transition. but there's only one transition. i saw some tech videos online where they used somewhat same transitions.. where can we get more transitions?
View 2 Replies
View Related
May 12, 2013
Have Sony HDR-TD20V 3D camera and transferred 3D videos to PC. Starting X6 program files are recognized as 3D (little box bottom left) putting videos in timeline. Went to "Create Video File" and selected 3D per manual.
Now here is what I need to know my options as presented. I want to use a Bluray disc to burn with burner (BD) and play in my Sony S570 3D player to 3D Tv. Do I use the Bluray setting and what format (1920x1080)?
I know there is AVCHD, MVC and so on as choices. In other words (in case others have similar camcorder and X6 software) what are the steps I need to follow. I was wondering if I had to leave file as is or have it side by side, etc.
My 3D Tv is able to play any formats (side, Up/DN, etc) I used the Sony Play Memories and burned a bluray successfully but played only in 2D. I've read about players needed to be AVCHD 2.0 to play Play Memories 3D made disc.
I want to be able to use X6 to create discs, burn them and play in BD 3D player.
View 6 Replies
View Related
Sep 21, 2011
I have a Sony HXR-MC50U HD camera. I have been recording videos and then transferring them to my computer using the USB cord. They are in the AVCHD format. I use VS X4 to edit my movies. The video plays great when on the camcorder, however when I transfer it to the computer something happens. In scenes where I "Pan" I sometimes get what can be described as a "squiggle" that runs in the middle of the screen. Sometimes there is more than one of them. The squiggle looks sort of like when cinemax late night is squiggled out.. It is a blurry line that runs across the middle of the screen. This "squiggle" will then transfer to any output file that I select. Whether I choose HD AVI or HD WMV, it still does it..
View 14 Replies
View Related
Mar 26, 2011
I had a topic disapproved yesterday, "Can't create 3D videos", as I had not filled in some details on my profile.I've now updated my profile - hopefully to the required standard.Is it possible you can approve the topic now, or do I need to create it from scratch?
View 3 Replies
View Related
Jul 26, 2012
How to stream HD videos to Apple TV 3?
View 2 Replies
View Related
Feb 17, 2011
I have dual role video which i am trying to merge as one. But when i placed one video in the video track and other in the over lay track, i am able to see both clippings in preview. But when i tried to make both videos equally to be shared in the screen, the clips shrinks and the picture quality becomes thin rather i want to reduce or cut the half portion of each clip so that when both half porting of the clip will fit the screen size to show as a single clip to have the dual role scenes perfectly.
View 2 Replies
View Related
Apr 6, 2012
I using the Trial version of VisualStudio X5. I am wondering if there's a "best" way of synchronizing two different videos of the same event. Example: Say I have one camera that is of someone shooting a rifle. The other camera is of the target impact. Now say I want the video to show this person shooting the rifle, with the target impact shown in a smaller window superimposed on the main video. What is the best way to make sure the two videos are in sync with each other?
View 4 Replies
View Related
Oct 10, 2013
I want to create videos for Instagram, but I'm having trouble making a template that outputs a video that I can upload from my Samsung S3 smartphone to Instagram. I'm currently using VideoStudio X5 and would like to get started with these videos as soon as possible.
View 11 Replies
View Related
Mar 23, 2012
I've tried to compile videos in Quick time format at 800 x 600, 65% quality, using MPEG4 compression and each time it compiles at a much lower resolution than it should be, I used the Indeo compression for AVI and THAT compiles to my liking at 800 x 600, 65% quality, DivX is only free for 15 days, Xvid and Windows Encoder makes no difference (that can be noticed), Quicktime, DirectX and Windows Media Player is up to date.
I'll try compiling it using a compressor other than MPEG-4, but I'm not too hopeful of improvement, why it can compile AVI, but not Quicktime, I tried batch converting AVI to Quicktime, it still doesn't work.
View 1 Replies
View Related
