AutoCAD .NET :: Compilation Error During Build Project Setup

Mar 4, 2013

I am trying to deploy my DLL and during compilation , I got the below error.

------ Build started: Project: Practice, Configuration: Debug x86 ------

vbc : warning BC40010: Possible problem detected while building assembly 'Practice': Referenced assembly 'mscorlib.dll' targets a different processor

vbc : warning BC40010: Possible problem detected while building assembly 'Practice': Referenced assembly 'System.Data.dll' targets a different processor

Practice -> C:VBProjectPracticePracticeinx86DebugPractice.dll
------ Starting pre-build validation for project 'mySetup' ------
WARNING: Unable to find dependency 'ACMNUPARSER' (Signature='(null)' Version='18.1.0.0') of assembly 'AcCui.dll'
WARNING: Unable to find dependency 'MANAGEDMC3' (Signature='(null)' Version='4.11.0.0') of assembly 'AdWindows.dll'
------ Pre-build validation for project 'mySetup' completed ------

[code]....

View 4 Replies


ADVERTISEMENT

AutoCAD :: Setup METRIC Project That Uses Meters Instead Of Millimeters

Oct 11, 2013

I am trying to set up a METRIC project (that I want to make template) that uses meters instead of millimeters.

So I created a new project, without the use of any template. I copied from the default Autocad templates folder the Model and Sheet templates to the new project folder and I set the units, scale and grid to meters and changed the path in project properties to these files.

Everything seems to work fine, except creations of sections/elevations. 

I edited the SectionStyles (Metric).dwg file in default styles folder and It works fine.

But I donțt want to change that file in the default folder, but to change the path of the section styles in the project. The only way I could do that was to change it in the tool palette - right click on callout. 

So how can I make the SectionStyles to load from a specific location for a project without having to right click on every callout that I want to use and change it manually?

There are some other things to do/change for making the project template that I want? (I am referring to the units setup).

View 1 Replies View Related

AutoCAD Inventor :: Setting Up Libraries In Project Setup

Feb 21, 2012

I have a folder under libraries in my project setup where I plan to keep my library parts. Once there the parts are read only. my questions is should I not have them there. I cannot modify then if i need to and if I copy it out to change it they do not update in the library.

What is the best way about setting up libraries in my project setup?

View 1 Replies View Related

AutoCAD 2013 :: Build A Spiral Staircase And Use Spline To Build The Railings?

Oct 10, 2013

I am trying to build a spiral staircase and need to use spline to build the railings. Every time I try to end the spline by hitting enter the spline disappears. I am using 2014, and I have never had this problem before with previous versions.

View 8 Replies View Related

AutoCAD Architecture :: How To Locate Project Tab And Title Block Setup Tab

Oct 4, 2011

I am attempting to create my first Title Block with Attributes.  I came across this online demo that suggests navigating to the "Projects" Tab - then selectign the "Title Block Setup" tab.  I am using CAD 2012 and spent the last hour searching for this command.  It does not appear on my navigation or tool palletes.  URL....

View 2 Replies View Related

VideoStudio :: Setup For Blu-ray Project

Sep 3, 2012

I'm green with Videostudio as i use pinnacle before.

The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!

View 2 Replies View Related

Photoshop :: Could Not Build Preview Because Of Program Error - CS6 / Mac?

Dec 22, 2012

I have a very simple two-layer image, and am using layer style "bevel and emboss" and the preview of changes starts out working fine. A little more monkeying around and the preview stops refreshing and the OK button just flashes. Click on OK to exit the layer style window and try to save the file (so I can quit and come back in) and I get this error: "Cannot build a preview because of a program error" and the file is not saved.
 
I found a similar thread on a support forum that suggested disabling all visible layers and saving, which works for saving the file. But when I try to preview my layer changes, it's back to the way it was: the first preview may show, then it stops entirely.
 
I am using CS6 13.1 x64 extended on a Mac running 10.8.2 with 8G of RAM and no other open apps. 

View 2 Replies View Related

AutoCAD Civil 3D :: ERROR 517 / Error In Reading TR-20 Project Data

Oct 25, 2012

I'm getting the following error:
 
ERROR 517 : Error in reading TR-20 project data.

but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?

View 4 Replies View Related

Photoshop :: Bridge CS6 Could Not Build Preview Because Of Disk Error - Mac 10.8.2?

Jan 16, 2013

The crashes always occur while editing a photo  in the Camera Raw editor in Bridge (most of the time they are JPG files, yes you can edit JPGS in the Adobe Camera Raw editor) and then hit the "Open Image" button that will open the image in Photoshop. Often Bridge, Photoshop and InDesign all are "not responding" and have to be force quit.

Always when I'm editing a photo in Photoshop that is on a server I get the " Could not create a preview because of a disk error message" which I have to hit the OK button to clear. I just tested this several times and I never get the disk error message when editing an image from my hard drive. I suspect there is a network communication problem.
 
MacBook Pro 15" Early 2011
2.2 GHz Intel Core i7
8GB 1333 Mhz DDR3 RAM
AMD Radeon HD 6750M 1024 MB
OS 10.8.2 (12c60)

View 5 Replies View Related

Photoshop :: Could Not Build Crop Preview Because Of Program Error

Mar 19, 2013

This is the error message I get on my mac book air. It previously worked and now all of a sudden it does not. I have creative cloud and running latest mountain lion.
 
I have uninstalled and reinstalled. I have 58.86GB of storage space.
 
Message:

Could not build the Crop preview because of a program error.

View 2 Replies View Related

AutoDesk Smoke :: Archive Setup Recovery Into A Project

Jan 16, 2014

Using Smoke EXT1 and a previous user archived his project using the old school method; media and setups seperatly instead of just selecting the project as a whole.
 
I've draged the media into a library and restored that easy enough but can not find the details of how to recover the setups from the tar file in the archive. It does not show up in the media pannel at all, just an emply folder. How to get these setups loaded into a project?

View 2 Replies View Related

InDesign :: Build Booklet Page Size Error Message

Jul 8, 2013

I am producing a newsletter that will be 17x11 with a double fold for mailing. I will also save it as a .pdf for e-mailing. I set my document up as  8.5 x 11, 4 pages. I've put in all my text and graphics but when I go to Print Booklet, the preview looks fine, the problem is when I select print I get this error message: "The active document uses multiple pages sizes. Print Booklet works only with documents that us a consistent page size." I rechecked and all my pages are set for 8.5 x 11.

View 10 Replies View Related

Revit :: Extract Export To DWG Setup TXT File From Project Model?

Jan 17, 2014

How do you extract an Export to DWG setup .txt file from a Revit project model?

View 3 Replies View Related

Photoshop Elements :: Saving Files In Editor / Could Not Build A Preview Because Of A Program Error

Nov 2, 2013

Whilst trying to save an edited file in editor I get the following message.

Could not build a preview because of a program error. Im using imac

View 4 Replies View Related

After Effects :: Possible To Easily Cut Compilation Length?

Apr 16, 2013

I thought that Media Encoder took forever to export my stuff... then I realized it had continued way beyond the actual size of the composition (as determined by the bar in Ae), and continued for the full duration which was much longer than that bar. Since trying to tell it to use only the bar in Media Encoder is a huge chore, can I somehow easily "cut to the bar" in Ae with a couple of clicks or so?
 
In order to make the composition LONGER, you apparently *must* edit the compo settings and manually enter a value. However, I'm hoping there is an easy way to cut it down to only the length it actually turns out to be when you are done. It would solve this problem and also make it more pleasant to navigate.

View 3 Replies View Related

GIMP :: Ufraw Install On Fedora 17 - Compilation Terminated

Jan 11, 2013

after configuring ufraw i am running the make command and get this error:

CXX dcraw.o
dcraw.cc:52:18: fatal error: lcms.h: No such file or directory
compilation terminated.

View 4 Replies View Related

Photoshop :: Error :: Critical Errors Were Found In Setup

Feb 21, 2008

When Running Setup.exe it manages to get through it then it opens up a web page called Adobe Setup and then an error message occurs saying "Critical Errors were found in Setup.

If you know how to fix this I Would much appreciate it as I have been wanting to do some designing for a long time.

View 2 Replies View Related

AutoCAD Architecture :: Error Using Project Navigator

Sep 30, 2011

i"m trying to use architecture 201.  I'm getting booted out of the software when I try to select a file using Project Navigator. as soon as I hover over the file name it kicks me out.

INTERNAL ERROR: !dbobji.cpp@7316: eNotOpenForWrite

Using windows 7 currently but it happened with xp pro also

View 1 Replies View Related

AutoCAD Inventor :: Project Cut Edges Error

Jul 9, 2012

I found a weird thing with the command 'Project Cut Edges'. I'll explain what I did. I made a new part and added a derived part. This derived part consists of 2 beams (see top left picture in attachment) (these beams are NOT Content Center parts, but I drew the beams myself, so it would be the same if I drew just rectangles as beams). The beams are at a specified distance of each other (see top right picture in attachment). I added a sketch on the YZ Plane and clicked on 'Project Cut Edges' (see bottom left picture in attachment). I added a rectangle and extruded the rectangle. But if I click on the 'Project Cut Edges' item in the browser under Sketch (or I open the Sketch), not all the lines are there anymore. And if I make the distance between the beams smaller, the lines get shorter too (and vice versa).

View 5 Replies View Related

AutoCAD Inventor :: Revert Back To Standard Setup Or BOM Setup From Scratch?

Jun 7, 2013

In our drawing office we use Inventor in a mining materials handling environment.  Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing.  Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.

How do I either revert back to the standard setup or do a BOM setup from scratch?

We use IV 2013 Professional on Windows 7 64 bit.

View 1 Replies View Related

AutoCAD 2013 :: Associating Drawing To Project Error

Aug 27, 2013

I have created a new data shortcut project folder, i have the data shortcut set to the drive & the correct project, yet i cannot associate the drawing to the project.  Even when I do attempt to set it to the correct project, it will not register.  I have tried the "associate current dwg to project", as well as the "associate multiple dwgs to projec"t, yet it will not recognize it at the top of the screen. 

Windows 7 Professional
64-Bit Intel Xeon 3.30GHz 8.00GB RAM
AutoCAD Civil 3D 2014

View 1 Replies View Related

AutoCAD Civil 3D :: Associating​ Drawing To Project Error

Aug 28, 2013

I have created a new data shortcut project folder, i have the data shortcut set to the drive & the correct project, yet i cannot associate the drawing to the project.  Even when I do attempt to set it to the correct project, it will not register.  I have tried the "associate current dwg to project", as well as the "associate multiple dwgs to project", yet it will not recognize it at the top of the screen. 

Windows 7 Professional
64-Bit Intel Xeon 3.30GHz 8.00GB RAM
AutoCAD Civil 3D 2014

View 4 Replies View Related

Photoshop :: CS3 - Download Disk On Newer Laptop - Getting Setup Has Encountered An Error?

May 24, 2012

I have PS CS3 on a older laptop.  I have been trying to download the disk on a newer laptop.  I keep getting Setup has encountered an error and cannot continue.  Internal error 2739.  how to get the program downloaded?

View 6 Replies View Related

AutoCAD Inventor :: Sharing A Project With Content Center Files / Error

Oct 21, 2013

I am trying to share an assembly with some design accelerators and content center files and it seems to be not possible. I changed the directory of the application>file>content center to the same location on both PC but it is still not working.

View 2 Replies View Related

VideoStudio :: Dump Error When Open Saved Project

Oct 16, 2013

My problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:

"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.

The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"

View 8 Replies View Related

VideoStudio :: Burn Non-HD Project Onto Blu-ray Disk - Unspecified Error

Feb 16, 2013

I am trying to burn a non-HD project onto a Blu-Ray Disk and every time after the video/audio stage I get the "unspecified error" message. I have now wasted 6 Blu-ray disks trying to solve this problem. I have reloaded the software and uploaded the patch. I have checked and all my drivers are up to date.

Files are not corrupted as I have checked. I have even tried this on a 16 second video and it fails. I can burn it to DVD but the quality is poor. I have tried reducing the speed to the lowest setting at 4X. It is writing to the BD-R as mentioned but the content is not recognized. If I write it to a Blu-ray file it appears to work.

View 5 Replies View Related

Maya :: Error When Trying To Move Or Rename Entire Project

Jul 17, 2013

Recently I renamed a folder that contained a Maya project. Here's a simple file structure to show what I mean:
 
I renamed this:
OLDname > mayaProject > scenes > Project01.ma
 
…to this:
NEWname > mayaProject > scenes > Project01.ma
 
The mayaProject (and all it's subfolders: scenes, assets, etc.) was created in Maya, and the OLDname folder was where I kept it and the other files related to the project.
 
After renaming that folder, when I double clicked the Project01.ma file to launch Maya, I received this error:
// Error: Wrong number of arguments on call to pv_performAction
 
When I relaunched Maya by its icon and used the File > Open Scene… option, I received this error:
// Error: Wrong number of arguments on call to performFileAction does not match number of parameters in procedure definition.
 
In both cases, Maya opened a blank Untitled file, instead of my Project01.ma file. When I changed the name of that folder back to OLDname, the Project01.ma file opened properly.
 
My question is, how can I rename or move this folder and still preserve the file hierarchy that Maya needs to open the Project01.ma file?

View 1 Replies View Related

Photoshop Elements :: 10 Slideshow - Error Saving Project

Dec 13, 2012

I have been getting an error message: "Error Saving Project"  when I try to save my PSE 10 slide show.  I am unable to save any changes.  I have closed out the project and opened it again and received the same error message. 

View 1 Replies View Related

Illustrator :: Got Error When Editing Project - The File Disappeared?

Aug 8, 2013

Yesterday while I was editing a project in After Effects I used the command-E within AE to open the selected filein my AE project in Illustrator. Everything was fine, I was able to move things across all exisint layers without changing the file layer organization structure. When I went to save the file, everything seemed to go fine and the asterisk went away indicating it saved the file. When I went back into After Effects, AE told instantly gave me an error: "After Effects error: File exists but couldn't be open for reading: "/Volumes/media/CRISP/Motion/_AIs/dining room.ai"/ (3 :: 0)". But when I go into that exact volume destination, the file is missing and I can't find it anywhere. The volume is a server on the network I use here at my job. The server has never had issues with deleted files or not being able to save files onto it. It is always on and connected.
 
Despite AE telling me it exists still but it can't open it, I can't find the illustrator file anywhere on my Mac or media server. I've done advanced searches with hidden files being visible and I've even looked in a couple hidden folders ".ExampleHiddenFolder" and I still can't find the file with a matching name or extension. I've even tried use the command-option-shift-open within Illustrator to see if I could open any visible file. I just can't find it anywhere and I don't know why Illustrator would just go and delete my file. Yesterday the Recent Files within Illustror would indicate that I had recently opened a dining room.ai file but when I would click on it to open it to try and recover it, AI said it couldn't locate the file. Now today the file history doesn't even show up in my recent files anymore (it is still the last file I opened in AI).

View 2 Replies View Related

VideoStudio :: Render 23 Minute Project To WMV HD 720p It Gets To 6% And Says File Reading Error?

Dec 11, 2011

When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.

View 11 Replies View Related

AutoCAD Architecture :: Tool Palettes Aren't Same In New Project As In Project Template?

Dec 6, 2011

I have a Project Template that is used when creating a new project.  I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same.  How do I get the new Projects to pull the same Tool Palettes from the Project Template?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved