I have been getting an error message: "Error Saving Project" when I try to save my PSE 10 slide show. I am unable to save any changes. I have closed out the project and opened it again and received the same error message.
View 1 RepliesI'm trying to save a file as a back-up so I need to save it to my PC in a file format that is editable in elements 8
View 1 Replies View RelatedI have Photoshop Elements 5.0, but not Premiere Elements. I'm creating a slide show of 415 photos, and I added a soundtrack with about 10 music tracks. All the music tracks have been copied from music CDs. It works fine in Preview mode; but when I save it as a .pdf file, it won't play back with the entire soundtrack. The sound stops after about 2 tracks, and I get an error message. The error message reads:
Warning: Java Script writer
Acrobat has encountered an error while playing this media clip.
It doesn't appear to be a file size problem. I've tried saving it as a medium size file, instead of a large file, but I still get the same error message when I open the saved file. (The large file is 170 MB; the medium file is 134 MB.) Also, there doesn't seem to be a problem, if I only include 2 music tracks.
Does Elements 5.0 support this kind of soundtrack? Will it work if I get Premiere Elements 3.0? Or do I need to get Elements 6.0 and Premiere Elements 4.0?
Basically I open a jpg file for editing in photoshop elements and then use "save as" to save my edited project as a jpg with a new filename in a local picture folder.
My new file however shows as
File Type: File
It will not open! the file wants me to associate a program to open it with and If I select photoshop to open the file I get a warning dialogue "Cannot open 2.5 3 Core TQ Rubber Flex because it is the wrong type of file"
This is the version of photoshop and my system info
Adobe Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Here is an example of one of these image files as seen on my pc.
Whilst trying to save an edited file in editor I get the following message.
Could not build a preview because of a program error. Im using imac
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
Is there any way I can save my completed photoshop project as a .jpg file. I'm using photoshop cc.
View 3 Replies View RelatedI tried to export my project. I don't know where it was exported to. I did not see where I could choose the destination. I ultimately want to save it on my google drive.
View 5 Replies View RelatedI have started editing photos using the Photo Fix Options in Instant Fix. I have then switched to Photo Editor to fine tune my edited picture. When I use save or save as, to save the edited picture both the edited and original appear in the files. If I start in in Photo Editor and save there is an option to uncheck that reads "Save in version set with Original" However I am more comfortable with beginning in Instant Fix and then switching to photo editor. For some reason when I go to save after switching from Instant fix to Photo editor the uncheck feature is no longer available. step by step instructions to save revised photo afterusing Instant Fix first then Photo Editor.
View 3 Replies View RelatedHow do I get VSX4 stop auto saving a project to its own My Projects folder and save it to My Projects folder in my media hard drive G:What are the pros and cons with these two methods?
View 2 Replies View RelatedI just spent the last couple of hours programming 28 stills with edges in CFX. I phsically clicked on save project repeatedly in those hours, especially once I hit a MAJOR milestone. I added a shadow cast node in action and my system locked up. I was forced to force quit. When I reopened my project, I found that I lost a couple of hours worth of work. In the months going on year of using this editor, I find that smoke 2013 is very well intentioned, but seriously lacking in very basic functionality. Putting out a product that is touted as a powerful editor that doesn't have a audio cross-fade node (lost in EXT version), can't add a simple outline to a clip with a button click (the reason I spent hours adding a hard shadow and changing layer priority for each of the 28 clips and finally and MOST importantly, saving EACH AND EVERY TIME the editor clicks save to completion is simply doing a diservice to a quality product. when a person clicks file-save project, the project should save fully.
View 9 Replies View RelatedI use lightroom to edit the timelapses I shoot and it works brilliantly with the sync setting. But my problem is I use presets that call for the slideshow to move at 24 fps, 26fps, 30fps etc. and some of these time lapses contain over 300 photos and whenever I try to export the timelapse as a video from the slideshow module about an 8th of the way into the progress bar it stops and a message comes up that says "unknown error occurred" So my question would be: Is there a maximum number of slides you can have in a slideshow and is that what's causing this to happen?
View 2 Replies View RelatedToday I have a lucky day by finding the reason why X4 saving project costs minutes each time I do. I bought special to be as fast as possible a Medion Pentium 5 SSD harddrive computer and installed the Videostudio software all on the SSD drive to get as much speed as possible for editing, rendering, etc....But last few month it did take minutes to save a project each time I did and could not find the reason why. I did change directories and locations on the harddrives and lots of other things to get it good to work, but now I have found the reason, it is the smartsound track what makes the problem. Without smartsound music everything works ok with saving projects in seconds.
Other Thing what makes problems is the 15 minutes limit for youtube in videostudio. I have more than 90 movies now at youtube, but have to upload them outside videostudio because their lengt of more than 15 minutes.Some movies are more than one houre and at youtube goes everything well without any problems.
I have made a project last night. and when I was gonna save it, it was written that video studio only save file as *VSP. I want to know how to save the project as a video format for example as *WMV or something like that.
View 2 Replies View RelatedI have an assembly that needs to added to a project. How the whole project system needs to be laid out even though I've used Inventor for several years. Guess it's time to get some formal training.
If I save it to a library that is in the project I can't make changes so how do I take an existing assembly that needs to be worked on and add it to the project.
After realizing the Mercalli runs better on single clips, is there a way of editing a clip within a project and saving (after "creating" this clip only) and then reinserting into the project?
View 4 Replies View RelatedI am trying to output a project at higher than 30fps and I am failing miserably. My camera can create 1080 mp4 files at 30fps or 720 mp4 files at 30 or 60fps. I want to creat a video using 720 at 60fps (or near to it).
If I load a 60fps clip and play the clip it runs at the original frame rate. If I play the project however, it plays at 25fps. I have tried to change the project properties, but I cannot select anything higher than 25fps in mpg (or 30fps in avi). Likewise, when I create a video file I am stuck at the lower frame rate. Although I am happy with the 1080X30fps clips and projects; it defeats the object of having a faster camera.
I'm running Revit Architecture 2012. I did a render and it looks fine in the default {3D} View. I selected to save it to the project and when I go to the renderings view to recall it, the color balance is all shifted off way way to the blue end. I tried going back over to render dialog and adjusting the white point all the way up, and it had the expected effect in the {3D} View (shifting everything to overblown orange), but nothing changed at all in the renderings View when I tried to resave it after making the adjustment.
View 3 Replies View RelatedI have Photoshop Elements 4.0, and am getting started moving around and playing with the program.
I have compiled and saved a slideshow with audio, and am pleased with the outcome, HOWEVER........when I try to record it to a DVD it won't allow it (says wrong media) and will only let me record to a CD-R. (Yes....it's a DVD recorder) Afterwards, the CD-R won't play on my DVD player.
I received a copy of Adobe Photoshop Elements 9 with a Epson Scanner. I want to make a basic DVD slide show (interactive) that can be viewed on a TV. I do not need audio or any other options.
The program said I would have to upgrade to Adobe Premier Element to do that, but when I checked the specs on Adobe Premier Elements 11, It did not give any indication that I could do that.Everything appeared to be for video and adding a multitude of options (that I do not want or need). What do I need to make a basic DVD slide show for TV?
I am trying to add an mp3 purchased from Amazon to a slide show. I'm getting a message that I don't have a compressor / decompressor? how to add music?
View 2 Replies View RelatedHave P E 5. Wish to create and display slide shows on HDTV. Have created a show, but just learned that my version cannot burn the show to DVD. Are there other options? Does the latest version 10 have this feature?
View 4 Replies View RelatedI am trying to add music to my slide show and I get this error: The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed. I went to the Adobe site and downloaded a codec program, and restarted but still got the same error.
View 5 Replies View RelatedI have PSE 11. I created a slideshow and output it to a CD for a VCD. My TV, 2 years old, wont recognise the format. How do I get a CD or DVD that will play my slide show on TV?
View 3 Replies View RelatedI am on a mac and want to add music to a slideshow from i tunes. How do I transfer this?
View 1 Replies View RelatedI tried many times to output a slideshow to DVD on PSE 8, and it crashed. A message will say that it has stopped working. Possibly could I solve the problem by re-installing PSE 8? If so, do I need to uninstall first? And any chance of getting media catalog or saved albums?
View 2 Replies View RelatedWorking with musicin a slide show in Elements how can I get it from a Cd to the slide show?
View 2 Replies View RelatedCan you have more than one song on a slide show.
View 1 Replies View Relatedpanels frozen; create doesn't show slideshow as an option.
View 2 Replies View RelatedI made my first attempt with my new photo shop Elements 11 and adobe Premier, to burn a slideshow using photos and music. I was able to burn it with no difficulty but some of my photos had been turned sideways on the finished disc. They were not this way on the slideshow. How can I correct this for a reburn?
View 3 Replies View RelatedI am using PSE 11 and am trying to add music to a slideshow and can't get anything to load other than the pre-recorded background music I am trying to transfer music from my i tunes library but it won't load.
View 1 Replies View Related