AutoCAD Civil 3D :: Associating Drawing To Project Error
Aug 28, 2013
I have created a new data shortcut project folder, i have the data shortcut set to the drive & the correct project, yet i cannot associate the drawing to the project. Even when I do attempt to set it to the correct project, it will not register. I have tried the "associate current dwg to project", as well as the "associate multiple dwgs to project", yet it will not recognize it at the top of the screen.
Windows 7 Professional
64-Bit Intel Xeon 3.30GHz 8.00GB RAM
AutoCAD Civil 3D 2014
View 4 Replies
ADVERTISEMENT
Oct 25, 2012
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
View 4 Replies
View Related
Aug 27, 2013
I have created a new data shortcut project folder, i have the data shortcut set to the drive & the correct project, yet i cannot associate the drawing to the project. Even when I do attempt to set it to the correct project, it will not register. I have tried the "associate current dwg to project", as well as the "associate multiple dwgs to projec"t, yet it will not recognize it at the top of the screen.
Windows 7 Professional
64-Bit Intel Xeon 3.30GHz 8.00GB RAM
AutoCAD Civil 3D 2014
View 1 Replies
View Related
Jul 2, 2012
Anyway to disassociate a drawing from a shortcuts project? I have a drawing that I want to use in class to show people how to create data shortcuts but since it's already associated with a project, it doesn't work quite as simple as I would like it to.
View 3 Replies
View Related
Dec 30, 2013
I am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
View 4 Replies
View Related
Nov 5, 2013
I get a fatal error message: Unhandled Access Violation Reading 0x7ffffffd Exception at 6d9cc265h when i try to do anything in a drawing.
View 4 Replies
View Related
Jan 31, 2011
I am using AutoCAD Civil 3D 2011 and everytime I export a model to AutoCAD format I get the message:
"Warning and error occurred during save. We recommend that you run RECOVER on the drawing"
Although it usually finds one fault during Audit or Recover and fixes that, the message still persists in appearing every time I use the export function. Why this happens and how I can sort it out?
View 4 Replies
View Related
Jul 20, 2010
I am operating 3D Civil with Windows 7, 64-bit system.
Most of the time when I close a drawing, particularly when I have two or more drawings open, the program closes down with the following message "Autocad Application has stopped working - Windows is collecting more information about the problem"
I then have to restart 3D Civil
View 7 Replies
View Related
Mar 6, 2013
I had a corrupted file that crashed every time it's opened. Now the drawing recovery manager has this message when i click on the folder to try and remove the temp files. how to remove the recovery folders so this doesn't keep happening?
Drawing Recovery Palette Error Message:
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
View 4 Replies
View Related
May 13, 2010
Occasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
View 9 Replies
View Related
May 23, 2013
We just installed 2014 on two work stations and saved a few Civil 3D files with it. When we try to open these Civil 3D drawings in 2013 they crash with a FATAL ERROR.
The last few lines on the command line shows: Loading Modeler DLLs.
Modeling Operation Error: Operation unsuccessful.
Modeling Operation Error: Operation unsuccessful.
This error seems to only happen with drawings that have infill grading. I tested it with a drawing with just poly lines and it worked fine. I then converted those poly lines into feature lines using 2014 and it opened fine in 2013. I then added an infill to the feature line region in 2014 and it crashes in 2013.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
View 5 Replies
View Related
Sep 30, 2011
i"m trying to use architecture 201. I'm getting booted out of the software when I try to select a file using Project Navigator. as soon as I hover over the file name it kicks me out.
INTERNAL ERROR: !dbobji.cpp@7316: eNotOpenForWrite
Using windows 7 currently but it happened with xp pro also
View 1 Replies
View Related
Jul 9, 2012
I found a weird thing with the command 'Project Cut Edges'. I'll explain what I did. I made a new part and added a derived part. This derived part consists of 2 beams (see top left picture in attachment) (these beams are NOT Content Center parts, but I drew the beams myself, so it would be the same if I drew just rectangles as beams). The beams are at a specified distance of each other (see top right picture in attachment). I added a sketch on the YZ Plane and clicked on 'Project Cut Edges' (see bottom left picture in attachment). I added a rectangle and extruded the rectangle. But if I click on the 'Project Cut Edges' item in the browser under Sketch (or I open the Sketch), not all the lines are there anymore. And if I make the distance between the beams smaller, the lines get shorter too (and vice versa).
View 5 Replies
View Related
Mar 4, 2013
I am trying to deploy my DLL and during compilation , I got the below error.
------ Build started: Project: Practice, Configuration: Debug x86 ------
vbc : warning BC40010: Possible problem detected while building assembly 'Practice': Referenced assembly 'mscorlib.dll' targets a different processor
vbc : warning BC40010: Possible problem detected while building assembly 'Practice': Referenced assembly 'System.Data.dll' targets a different processor
Practice -> C:VBProjectPracticePracticeinx86DebugPractice.dll
------ Starting pre-build validation for project 'mySetup' ------
WARNING: Unable to find dependency 'ACMNUPARSER' (Signature='(null)' Version='18.1.0.0') of assembly 'AcCui.dll'
WARNING: Unable to find dependency 'MANAGEDMC3' (Signature='(null)' Version='4.11.0.0') of assembly 'AdWindows.dll'
------ Pre-build validation for project 'mySetup' completed ------
[code]....
View 4 Replies
View Related
Oct 21, 2013
I am trying to share an assembly with some design accelerators and content center files and it seems to be not possible. I changed the directory of the application>file>content center to the same location on both PC but it is still not working.
View 2 Replies
View Related
Jun 12, 2013
Is it possible to include an existing drawing into a new project I created so it shows up in the project navigator?
I'm running ACA 2011.
View 1 Replies
View Related
May 13, 2011
Is that possible to get the current Project number and Drawing by using some vba code?
View 2 Replies
View Related
Oct 16, 2013
My problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:
"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.
The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"
View 8 Replies
View Related
Feb 16, 2013
I am trying to burn a non-HD project onto a Blu-Ray Disk and every time after the video/audio stage I get the "unspecified error" message. I have now wasted 6 Blu-ray disks trying to solve this problem. I have reloaded the software and uploaded the patch. I have checked and all my drivers are up to date.
Files are not corrupted as I have checked. I have even tried this on a 16 second video and it fails. I can burn it to DVD but the quality is poor. I have tried reducing the speed to the lowest setting at 4X. It is writing to the BD-R as mentioned but the content is not recognized. If I write it to a Blu-ray file it appears to work.
View 5 Replies
View Related
Jul 17, 2013
Recently I renamed a folder that contained a Maya project. Here's a simple file structure to show what I mean:
I renamed this:
OLDname > mayaProject > scenes > Project01.ma
…to this:
NEWname > mayaProject > scenes > Project01.ma
The mayaProject (and all it's subfolders: scenes, assets, etc.) was created in Maya, and the OLDname folder was where I kept it and the other files related to the project.
After renaming that folder, when I double clicked the Project01.ma file to launch Maya, I received this error:
// Error: Wrong number of arguments on call to pv_performAction
When I relaunched Maya by its icon and used the File > Open Scene… option, I received this error:
// Error: Wrong number of arguments on call to performFileAction does not match number of parameters in procedure definition.
In both cases, Maya opened a blank Untitled file, instead of my Project01.ma file. When I changed the name of that folder back to OLDname, the Project01.ma file opened properly.
My question is, how can I rename or move this folder and still preserve the file hierarchy that Maya needs to open the Project01.ma file?
View 1 Replies
View Related
Dec 13, 2012
I have been getting an error message: "Error Saving Project" when I try to save my PSE 10 slide show. I am unable to save any changes. I have closed out the project and opened it again and received the same error message.
View 1 Replies
View Related
Aug 8, 2013
Yesterday while I was editing a project in After Effects I used the command-E within AE to open the selected filein my AE project in Illustrator. Everything was fine, I was able to move things across all exisint layers without changing the file layer organization structure. When I went to save the file, everything seemed to go fine and the asterisk went away indicating it saved the file. When I went back into After Effects, AE told instantly gave me an error: "After Effects error: File exists but couldn't be open for reading: "/Volumes/media/CRISP/Motion/_AIs/dining room.ai"/ (3 :: 0)". But when I go into that exact volume destination, the file is missing and I can't find it anywhere. The volume is a server on the network I use here at my job. The server has never had issues with deleted files or not being able to save files onto it. It is always on and connected.
Despite AE telling me it exists still but it can't open it, I can't find the illustrator file anywhere on my Mac or media server. I've done advanced searches with hidden files being visible and I've even looked in a couple hidden folders ".ExampleHiddenFolder" and I still can't find the file with a matching name or extension. I've even tried use the command-option-shift-open within Illustrator to see if I could open any visible file. I just can't find it anywhere and I don't know why Illustrator would just go and delete my file. Yesterday the Recent Files within Illustror would indicate that I had recently opened a dining room.ai file but when I would click on it to open it to try and recover it, AI said it couldn't locate the file. Now today the file history doesn't even show up in my recent files anymore (it is still the last file I opened in AI).
View 2 Replies
View Related
Apr 24, 2012
Is there a way to add descriptions to DS project folders after the fact?
View 9 Replies
View Related
Mar 4, 2013
I need to produce a fly through for a windfarm project. I normally would do the 3d linework etc in Civil 3D and then export dxf data out to another package that I produce the 3D flythrough in and apply textures for soil, roads etc. in that package. I can then produce a decent flythrough in a few minutes.
I have tried some simple flythroughs in C3D but they seem very choppy and not very impressive (and take forever to process). I'm not particularly familiar with C3D for this type of use.
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 3 Replies
View Related
Jan 2, 2014
C3D 2012 SP4
Win 7 Pro
When creating the short cut folder you have the option of using a project template. Instead of browsing for it all the time , can a permanent path on a network be set to look for the project template everytime?
View 3 Replies
View Related
Dec 11, 2012
I’d like to get some info about estimating time needed for a project. Nothing too exact is needed.
View 7 Replies
View Related
Mar 24, 2012
Iv'e been using Land Desktop 2005 and 'am checking out a trial of 3D 2012. Needless to say I'm used to the 2005 format where there is simply a tab for Projects to create a new project or manage existing projects.
View 3 Replies
View Related
Nov 28, 2012
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies
View Related
Dec 11, 2011
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies
View Related
May 1, 2013
When I import points from an external project point database (LDD) which I do quite often to import points from 2008 to Civil 3d it works fine for me, but when a co-worker tries doing it from the same exact drawing just a different computer it does not work. Whe he tries to do it, a red "X" appears telling him there is some kind of error. VERY strange and I have no clue why????
View 7 Replies
View Related
Aug 19, 2013
I have a problem with CIVIL 3D 2013, when I create an axis from a 3D project of curvature, the axis does not correctly following my project.
View 3 Replies
View Related
