i"m trying to use architecture 201. I'm getting booted out of the software when I try to select a file using Project Navigator. as soon as I hover over the file name it kicks me out.
INTERNAL ERROR: !dbobji.cpp@7316: eNotOpenForWrite
Using windows 7 currently but it happened with xp pro also
Does it make sense to use PN for a residential project. This house is in a location that requieres the living space to be 36" above the garage level. In addition the LR ceiling is 18' higher than the other rooms. How shouuld I set up the levels in the construct tab of PN. I am thinking that the garage is level 0, and the other rooms other than LR would be level 1 and the LR to be level2. Or is it that the whole house is one level with 3 divisions?
View 2 Replies View RelatedHad file "weirdness" when users place "odd" characters in filenames?For example, I have several users that use the ampersand sign in the file name as in: FF&E HT.dwg.
I'm wondering if this causes an issue with the corresponding XML file since the ampersand is kind of a special character.
These users were able to open different versions of the "same" file at various points in its generation. One was the current version, another was several days old and the third version was a month or so old. Each time the file was opened (on the same day and time), the users did not get a warning stating the file was already opened and they both opened the file from Project Navigator.
We are currently running AutoCAD Architecture 2011.
Is it possible to include an existing drawing into a new project I created so it shows up in the project navigator?
I'm running ACA 2011.
I am new to the project navigator, I have several projects I would like to move to another computer and I am not sure how to do this. I have searched but must not have used the right words in the search. What is the correct way to move or export these project and import them into the other PC?
View 2 Replies View RelatedIn my office of about 30 computers and over the course of about 10-12 months we have been experiencing a problem with project navigator. When opening ACAD or changing projects about 60% of the time it gets hung up and the load bar perpetually loads over and over again. If just left to run it takes 5-10 mins to load the project then ACAD will crash after a couple of commands. If opening the task manager and ending the program it will often freeze the computer for about 5-10 mins as well.
We have been actively using the project navigator for years and not until the last yr have we been having this problem. We bought pretty much the whole office new computers a few months ago and the problem still exists. We are running AutoCAD Architecture 2012 and our machines are window 7, intel core i7 3.5 GHz, 8 GB ram, 64 bit operating systems, with a Nvidia Quadro 2000 graphics card. So our machines are solid.
Co-Worker was in the process of moving his mouse, accidentally clicked, catching PN and began draggin it. Upon unclicking, PN moved to what I can only describe as the background.
Currently have MdiTab18.arx loaded in my applications to provide drawing tabs. PN appears BEHIND THAT. Toolbars and pull down menus are in front of it. unloading app, moving toolbars,....nothing allows me access to it to drag it back.
Tried restarting, but PN stays put. Tried different work space, but PN doesn't move.
Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View RelatedI have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
is it possible to copy everything that is set up in the Project Navigator (Sheets, Views etc) and use it for a complete new Project?
View 1 Replies View RelatedI have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View RelatedI'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
I'm using ACA 2013. I am using sheet sets and I am working on my Sheet Template.Typcially we use a 3 line project title in our standard title block and I would like to continue doing so . The problem is that the Project Data only has one line for the "Project Name".
How can I get the project name to be 3 lines that separate when I want them to, I.E.
NEW MEDCIAL OFFICE BUILDING
FOR
MY LOCAL HOSPITAL SYSTEM
Is this a change in the "Project Name" field in the sheet template?
I would like to copy a sheet from one project to another. Nothing changes from one to the other. Much like copying a view, I would like to copy a sheet. Is this possible and how?
View 3 Replies View RelatedWhat is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies View Relatedhow to transfer text (cover sheet) from one project to another. I opened legend and then put it on a sheet then went to transfer it to the next project and it wont except it.I will need the cover sheet for every project.
View 6 Replies View RelatedThere is a way to detect is a project is loaded using PSD VB code?
View 9 Replies View RelatedFor some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
I am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View RelatedWhat is the best method to re-path x-refs in a project whose folder has been moved. We are talking about 60-100 x-refs here.The originals were created in ACA 2009 and were not pathed relatively; nor was Project Navigator used. We are currently using ACA 2014.
View 1 Replies View RelatedAutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
I am using 2011 and have created a project for a 2 story structure. I have constructs for each floor, each floor slab and roof slab.
In which construct do I apply the roofline command? I am unsuccessful so far. Does the roof slab need to be in the same construct as the walls?
I am running ACA 2011 x64. Recently I have been unable to save a view drawing in the project manager. When I press the save button it a window pops up telling me it cannot save the drawing in my project folder and saves it as a .tmp file.
View 5 Replies View RelatedI am attempting to create my first Title Block with Attributes. I came across this online demo that suggests navigating to the "Projects" Tab - then selectign the "Title Block Setup" tab. I am using CAD 2012 and spent the last hour searching for this command. It does not appear on my navigation or tool palletes. URL....
View 2 Replies View RelatedIn ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
Is there a way to have check boxes in the Project Properties to be able to turn on and off txt / stamps / etc. for all sheets in a project? I am looking for something that is similarly down in Revit Title Blocks?
View 6 Replies View RelatedAfter having a problem projecting my walls to my roof slab (flat roof), which worked fine in previous sessions; and then trying the standard solutions of making sure my walls clean up properly, etc., I determined the problem was actually in that the walls do not like to project to a roof with components. In my last work session, I added a component to my roof. I switched back to a "standard" roof slab, projected the walls, and then switched back again to my roof with components.
View 1 Replies View RelatedAutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
Is it possible to insert a project detail field in a sheet column?
View 2 Replies View RelatedWe are copying our original files to a sub folder to make revisions that have only happened after bidding. We want to keep our original bid documents intact. I have created a sub folder called 'Conformed Documents' and added Constructs, Sheets, Elements, ect.
I copied the files over and used the Reference Manager to repath the files. However, all of my schedules and room tags now use the 'NA' prefix because it is not reading the project information. How can i reconnect this folder to the project folder?