AutoCAD 2010 :: Copy Everything That Is Set Up In Project Navigator?
May 8, 2012is it possible to copy everything that is set up in the Project Navigator (Sheets, Views etc) and use it for a complete new Project?
View 1 Replies
ADVERTISEMENT
AutoCAD 2013 :: Project Navigator - Change Project Number
Jul 17, 2013I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
AutoCAD Architecture :: Use Project Navigator
Dec 11, 2011Does it make sense to use PN for a residential project. This house is in a location that requieres the living space to be 36" above the garage level. In addition the LR ceiling is 18' higher than the other rooms. How shouuld I set up the levels in the construct tab of PN. I am thinking that the garage is level 0, and the other rooms other than LR would be level 1 and the LR to be level2. Or is it that the whole house is one level with 3 divisions?
View 2 Replies View RelatedAutoCAD Architecture :: Error Using Project Navigator
Sep 30, 2011i"m trying to use architecture 201. I'm getting booted out of the software when I try to select a file using Project Navigator. as soon as I hover over the file name it kicks me out.
INTERNAL ERROR: !dbobji.cpp@7316: eNotOpenForWrite
Using windows 7 currently but it happened with xp pro also
AutoCAD Architecture :: Project Navigator - File Name
Aug 12, 2013Had file "weirdness" when users place "odd" characters in filenames?For example, I have several users that use the ampersand sign in the file name as in: FF&E HT.dwg.
I'm wondering if this causes an issue with the corresponding XML file since the ampersand is kind of a special character.
These users were able to open different versions of the "same" file at various points in its generation. One was the current version, another was several days old and the third version was a month or so old. Each time the file was opened (on the same day and time), the users did not get a warning stating the file was already opened and they both opened the file from Project Navigator.
We are currently running AutoCAD Architecture 2011.
AutoCAD Architecture :: Insert Drawing In Project Navigator?
Jun 12, 2013Is it possible to include an existing drawing into a new project I created so it shows up in the project navigator?
I'm running ACA 2011.
AutoCAD Architecture :: Moving Project Navigator Projects To Another PC
Dec 27, 2012I am new to the project navigator, I have several projects I would like to move to another computer and I am not sure how to do this. I have searched but must not have used the right words in the search. What is the correct way to move or export these project and import them into the other PC?
View 2 Replies View RelatedAutoCAD Architecture :: Project Navigator Continuously Loading?
Nov 15, 2012In my office of about 30 computers and over the course of about 10-12 months we have been experiencing a problem with project navigator. When opening ACAD or changing projects about 60% of the time it gets hung up and the load bar perpetually loads over and over again. If just left to run it takes 5-10 mins to load the project then ACAD will crash after a couple of commands. If opening the task manager and ending the program it will often freeze the computer for about 5-10 mins as well.
We have been actively using the project navigator for years and not until the last yr have we been having this problem. We bought pretty much the whole office new computers a few months ago and the problem still exists. We are running AutoCAD Architecture 2012 and our machines are window 7, intel core i7 3.5 GHz, 8 GB ram, 64 bit operating systems, with a Nvidia Quadro 2000 graphics card. So our machines are solid.
AutoCAD Architecture :: Project Navigator - Inaccessible - Jumped Behind Background?
Sep 21, 2011Co-Worker was in the process of moving his mouse, accidentally clicked, catching PN and began draggin it. Upon unclicking, PN moved to what I can only describe as the background.
Currently have MdiTab18.arx loaded in my applications to provide drawing tabs. PN appears BEHIND THAT. Toolbars and pull down menus are in front of it. unloading app, moving toolbars,....nothing allows me access to it to drag it back.
Tried restarting, but PN stays put. Tried different work space, but PN doesn't move.
AutoCAD 2010 :: Project Browser - Create New With Project Number Prompt?
May 14, 2012How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
AutoCAD Architecture :: Sheet List Insertion From Project Navigator To Architecture Sheet
Jun 15, 2011Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View RelatedAutoCAD 2010 :: Copy Elements Of Files In Drawing - Copy To Clipboard Failed
Jan 11, 2013i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
AutoCAD Architecture :: Copy A Sheet From One Project To Another?
Jan 25, 2012I would like to copy a sheet from one project to another. Nothing changes from one to the other. Much like copying a view, I would like to copy a sheet. Is this possible and how?
View 3 Replies View RelatedAutoCAD Inventor :: Proper Way To Copy A Project To New Folder?
May 14, 2013What is the proper way to copy a project to a new folder and the projects not be linked in any way to each other. In other words I want to have a completely independent project that I can make minor changes to without it affecting the original project in any way because no matter what copy method or pack-n-go I have tried, the link is still there from the new project to the original. How do i break that link.
AutoCAD 2013
Inventor 2013
Windows Pro 7 x64
Asus Sabertooth X58
Intel Core i7 960 @ 3.2 GHz
24 GB ram
VideoStudio :: Copy / Paste From Old To New Project
Mar 7, 2013I have finished a family project (mainly images with titles) for my granddaughter and burned it to DVD. I included quite a few photos of her ancestors and titled them all. I am extremely happy with the result.How I need to do the same for my grandson. This one will include all the photos I have from his birth to his latest 14th Birthday. I would like to copy the section on Ancestors from my granddaughter's DVD to this new one without having to add all the old photos again and add titles to each.
Would it be possible to load the original VSP file and delete all the other content and then add new content around it? Is there an easier and more "professional" way to do this?
VideoStudio :: X4 Multiple Instance / Copy From One Project To Another
Nov 8, 2011Let's say I have a some footage in one project with all the effects, fade-ins/outs etc I want and I want to use the very same thing in another project. How can I get only this one part from project A to B.
Open a second VS don't work out of the box. It just goes to my already open window, if I try to open again. I don't want to convert is as a Video first - if I ever want to make changes this might make it more complicated - depending on the situation.
VideoStudio :: Copy Video Clips From One Project To Another?
Nov 20, 2012I'm working on a project that pulls together many short clips from many much longer video files e.g. there might be less than a minute pulled from a 60 minute file then another then another etc. I found that my computer (which is reasonably beefy) was struggling to cope with the workload so I split the project into separate project files i.e. Part 1, Part 2 and Part 3. My thinking was that once I had done all the editing I could cut and paste all the clips into a single new project file before rendering the entire thing. But I can't work out how to do it! Sure, I can copy and past individual clips or even a sequence of clips but on pasting they lose all the editing I've done! I just end up with a uniform bunch of unedited clips!
I guess the alternative is to render each project file (1, 2 and 3) separately then pull the rendered videos together into Project 4. I can then render Project 4 to give me my final 'movie'. But surely that means as I've rendered everything twice I'm suffering a quality loss?
So the question is: is there any way of copying edited video clips from one project file into another project file AND retaining all the edits?
VideoStudio :: Copy Video Lines From Old To New Project
Jan 3, 2013I was wondering if there is a way to copy tracks (video, overlay, audio) from an old project into a new project.
I have tried copy them and paste them but that is not possible.
An other solution could be to make a video file of the "old project" and import that on the video track in the new project.
In the past using Pinnacle copy tracks from other projects and paste them in new projects was a possibility.
Photoshop Elements :: How To Copy A Clip From One Project To Another
May 22, 2013I want to use some portions of a clip that I have modifyed to another new project. I tried with copy/past, but they are not transfered to the new project.
View 3 Replies View RelatedPremiere Pro :: Copy And Paste From One Project File To Another
Apr 22, 2014how to copy and paste a bin from one project file into another. I don't want to import using the Media Browser because it imports a bunch of reference files that are already in the project file I'm pasting into.
View 4 Replies View RelatedRevit :: Copy Detail Components Family From Project
Mar 7, 2014Is it possible by importing a drafting view or copying 2D details, to not duplicate the detail components families ? I tried many ways, but I always get my families duplicated.
Copying 'Gypsum' will always duplicate with 'Gypsum1', even if they are exacly the same original family.
Photoshop Elements :: Capture Or Copy Sound From A Project In E8
Mar 7, 2013I want to capture or copy sound from a project in Elements 8, save it to a file, and use it later in the project.
View 1 Replies View RelatedPhotoshop Elements :: How To Copy A Single Clip From One Project To Another
Nov 11, 2012How would I copy a single clip from 1 project to another?
View 1 Replies View RelatedPremiere Pro :: Project Manager Keeps Stopping And Failing To Copy?
Mar 14, 2014I have tried to copy a premiere pro cc project to an exernal location three times and each time the operation has failed. The first time adobe told me it couldn't locate two files and erased all of the files that had been copied and the copy folder. The second time it did the same thing. The third time it told me it couldn't locate yet another file but didn't erase it just stopped running the operation and left the copy folder half completed. All of the files it is claiming to not be able to locate are linked fine inside of the timeline and it exports fine.
View 1 Replies View RelatedAutoCAD 2010 :: Purging Project Wide Utilities
Aug 14, 2013Every time i run a project wide purge all blocks routine in Acad 12, it doesn't purge anything at all. Only when i go to each individual page and purge all.
I would like to remove any unused blocks/layers......
Is there a fix or a 3rd party app?
AutoCAD 2010 :: Import From Design Center Into Project
Jan 21, 2013how do i import from the design center into my project
View 1 Replies View RelatedAutoCAD 2010 :: Best Way To Archive And Move / Rename A Project Folder
Jan 3, 2013the best way to archive and move/rename a project folder? As the new CAD manager for my firm I am going to restructure our entire server as the current structure is very unorganized and inefficient. Projects date back as far as the 90's and I would like to move them all into an archive folder but also have them still be working files as far as XREF's are concerned. None of the drawings have XREF's that utilize the relative file location feature so when I do move a folder, all of the XREF's must then be updated. This is not an option because I have at least 500 projects that will be moved which would be far too time consuming.
View 5 Replies View RelatedAutoCAD 2010 :: Copy Panel To Tab
Nov 15, 2013I'm finally making a conscious effort to move to the ribbon... How to copy an existing panel to an existing tab?
I don't really want to start creating new panels from scratch.
AutoCAD Visual LISP / AutoLISP :: Copy Shortcut C Doesn't Copy Multiple But Typing In COPY Does
Aug 23, 2013I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
AutoCAD 2010 :: Copy To Clipboard Failed
Jun 2, 2009I am trying to copy some items in cad but I keep getting the error ' copy to clipboard failed'.
View 9 Replies View RelatedAutoCAD 2010 :: Rotate / Copy By Reference?
May 3, 2012Noticed that the multiple copy option has been removed from the rotate command? It used to be that I could choose the copy option in the rotate command and set a reference angle to create multiple copies of an object based on a rotational axis. Now the command will let you copy based on a reference angle, but only once. Is there a system variable I can set to bring this option back?
View 1 Replies View Related