My Nikon P100 produces videos with the extension MOV. When I run them on an older laptop that I use to drive slide shows, they run very slowly. I think that's because the file sizes are too large. Will VideoStudio allow me to resize the videos, in much the same way that PaintShop lets me resize photos? I want to know this before I buy it.
View 1 RepliesI'm a new user and cannot find how to re-size image in the user manual. I'm sure I have everything set up wrong. I'm making a time lapse movie from images taken on my 35mm camera.
I want the movie to be wide format 1080p. Once the images are imported, I have the extra space on the sides of the screen due to the difference in format of the 35mm images which I expected.
But I cannot find how to zoom the whole thing in to fill the wide format screen. I have tried the FX/Cropping filter but it only crops inside the existing area and doesn't zoom the whole thing in to fit the window. What am I doing wrong?
Using VideoStudio X4 SP2
Windows 7 Home
original files - Jpeg@3504x2336
Settings (16:9)
Project properties read:
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Just downloaded the trial of Video Studio Pro X6 and am trying it out. I have a past background with Adobe Premiere and even VideoPad, so while I'm not new to video editing, X6 is a little different to me. My two main problems at present are sizing and capture.
I'm trying to figure out how to resize clips that are too small, or too large for that matter, to the mpeg2 standard of 720P (16:9) I usually use. When I put...say...a 640 x 480 clip or still on the timeline there seems to be no tool to change their sizes with (that I have found so far). There are 8 squares that sometimes show up on the image, which allow me to resize, but when finished and I go to do something else, the image just pops back to it's original size. So I must be missing something here.
The second main problem I'm presently having is capturing video...which the program won't do. At present, I am capturing analog video through a USB device. When I try to capture, I get an error message telling me that the capture plug-in is already in use, or is missing, or so on. I have discovered on the web that this problem is very common! Why? I have never had a video capture setup on this particular computer before, so there's nothing on it to interfere with X6. So should I assume that the capture plug-in is not included with the trial? Can this plug-in be downloaded by itself?
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
View 14 Replies View RelatedI have cdr file with 250 pages of A4 size. How can I resize the whole document with reduction of 79% i,e approx 6.75x9.5 inch. I would like to reduce all element in proportional ie, line thickness, bitmaps, paragraphs.
View 5 Replies View RelatedI am attempting to save a PDF file (was JPG and converted to Vector and saved as PDF) as a SWF file. I need to resize it down to 80px x 80px.When I goto save for Web & Devices and change to SWF --> Image Size (tab): the new size (width and height) are greyed out and I cannot change them.
View 2 Replies View RelatedIs it possible, to resize pictures (PNG, JPG) as an automated action to a specific filesize.
View 12 Replies View RelatedElements 12, becuase I got allways a Error Message. I found a really good Tutorial, about this problem and did it step by step:
open as... choose picture(eps)... chose OPEN AS -TIFF...
Now I can edit the picture.
I resize the picture to more than 10000px. After this work the picture looked like ... unsharp.... I saw the pixel and I thounght that was the side-effect of the resize.
I was by a friend, who has the photoshop cs6 software(Stundent...) yesterday. I took the same eps file and opened it in his version. The result is unthinkable. The picture looked very great. I didn't see andy pixel. It looked sharp. Whats the reason for this difference?
I could resize the picture like a skyscraper and it looks alway very great.
I got my logo and the online company sent it in low resolution, I asked for the proper resolution for my web page and the company sent me this :
The AI (Vector) file(s) in the zip file are to be utilized for all high-res. And commercial printing applications. It is an Adobe Illustrator file and can only be opened and/or utilized if you have this professional design software. All commercial printers will have access to utilize these files.
I got the adobe illustrator and I am trying to fix the logo and just can not get the size.
I have the following Adobe Illustrator file: [URL] .....
I would like to copy all visible elements of this file, and paste them onto a new file whose size is that of a standard business card. To do this I create the business card AI file in illustrator and then paste the contents of the AI file listed above onto the file with the business card artboard. SINCE THE ARTBOARD IS MUCH SMALLER, I Select -> All and Resize to 2%.
A. What I don't understand is why the bordeaux square in the middle does not resize proportionally when I carry out this operation. Instead it completely shrinks to a much smaller size.
B. Furthermore, I would like to completely get rid of the orange area that falls outside of the artboard. How can I accomplish this second task?
I am having a very strange problem in illustrator and I can't work out what is wrong.
Before in a previous version when I embedded a barcode into an .ai file the barcode was fine but now in my new CS6 the stroke sizes go "mad" and resize?
Is there some sort of setting I am not selecting? I need to embed ALL images / barcodes into the packaging design as I need to send it to china for printing. (and create outlines - but can't do this until the barcode has first been embedded)
I take a large number of event images and the usual client request for images being sent to the press is image size rather than resolution, dimensions or other requirements.
Clearly in LR3 if the client has requested 3MB jpg the easy option is to after processing take my Canon 5d mkii RAW file and just hit export to max 3MB jpg.
My question is is it better - ie image quality better - to export by resizing longest edge to approx 3000 px and exporting to jpg which results in a similar file size, though different pixel dimensions? Or are they effectively the same?
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
I would like to resize and watermark all of the image in a particular file. I understand that I can do this with Lightroom, but I do now know how.
View 1 Replies View RelatedIt has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit)
Adobe Illustrator CC 17.1.0 (64 bit)
I have a client who has a set of .ai files they need resized to meet various epub layout specs. Apple and Kindle both are different sizes so I need to know the best way to resize an .ai file 11.25 x 5.65 inches into a smaller dimension in pixels while retaining the layers.
View 9 Replies View RelatedIn previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
I have used an exceptionally good website called [URL]...... for a number of years with no problems. I have just downloaded from them a .mp3 file lasting 5 minutes but when I come to load it into my project , I get an error message saying "File format mismatch". The only difference that I see between this and all the previous files I have downloaded from them is that this one has a bitrate of 320kbps compared to the previous ones of 130-190kbps.
View 6 Replies View RelatedI have several AVCHD folders I've copied to my HD in the last year from my Panasonic HDCSD20. Now I'm ready to edit them in VSX4. Is there any advantage to using "file/import media file to library" (which makes a copy in the working folder) vs just clicking on the folder icon and adding them? I've looked at the file size on both the original clip and the imported one and they are identical. It does seem as though VS extracts the original date and time shot and uses that as the imported file name,
View 2 Replies View RelatedI have done a lot of editing with VideoStudio Pro on current system but never ran into somthing like this:
I have a 2.7G file that I pulled from my DVR (mpg). Plays well on my ThinkPad but when I try to load it into VideoStudio Pro X3 (13.6.2.69) the software stops responding (get the "not responding" message) and I have to end the process.
I updated to SP3, no luck. Uninstalled and reinstalled VideoStudio, no luck. Search Corel and various boards and found nothing about file size being an issue. Even adjusted virtual memory settings.
I am capturing using a source that is a TIVO Series 3 HD box. I am capturing an HDTV channel. I have a Hauppauge 1600 capture card, and am using Win TV 7 to capture the signal. The connection between the TIVO box and the Hauppage card is an S-Video cable. The file that I capture is always in 4:3 format, even though the source is HD. The image is skewed vertically, as if a 16:9 image is being squeezed into a 4:3 display. I open the captured MPEG2 file in VideoStudio Pro X3. I have my project in VideoStudio Pro X3 set to the following:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 192 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
Then I use the 'Create Video File' command and 'Same as Project Settings' thinking it will then change the video from 4:3 to 16:9 but it doesn't. The new file has the 'Attributes' of 24 bits, 720 x 480, 16:9 but the image is still 'scrunched up' vertically just like the original 4:3 file.
How to get a 16:9 MPEG file created using the setup described? Should I be connecting my TIVO to the Hauppage card differently? There's no HDMI input on the Hauppauge card, so that's not an option. There is S-Video/Compsite, ATSC / QAM, and Analog Cable TV inputs.
Dell XPS Gen 2 Desktop, Pentium 4 3.2 Ghz
3 GB RAM
Windows 7
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
Just got Visual Studio Pro X4. My first experience with VS. A friend gave me a number of projects she had been working on with an earlier version. When I try to open a project (.VSP file) I get an error.
File is already open.
This happens with every project I try to open.
I am trying to edit .mts (from Panasonic HD video a camcorder) files as a project. Its very jerky and the sound does not synchronize the the video. I am using X4 pro on a Dell 420 XPS windows 7 64 bit with 6GB of ram.
View 3 Replies View RelatedI'm making some music videos, and I thought I'd get the best audio quality using .WAV files instead of MP3 files. Trouble is, when I load a .WAV into my audio track, all I get is a bunch of noise and loud hiss. An MP3 file works just fine. If I play the "clip" in the preview window, each file will play just fine, but the problem shows itself when I play the "project" in the preview window. Is this happening because my computer has choked on all the data, and it's too much for it to handle? Am I stuck with using the MP3 files in my projects?
View 9 Replies View RelatedI would like to convert my AVI files captured from my dV Sony camera (uses the small digital tapes) into mp4 files to save space on my drive.
I was able to render one AVI file to my hard drive but the next time it crashed and wont let me do it again, no matter what I tried. I also downloaded the latest patch.I did used the enhance mpeg rendering and seemed to work.
What video file format would give me the same video quality as the original AVI captured from my camera?Should I use mp4 or there is a better alternative since keeps crashing the program?
I made a copy of some video from a TV show and want to edit it. How do I do this. It has the extension: MOVIE.VRO. Do I need to convert the VRO file to what?
View 14 Replies View RelatedI'm trying to load an avi video ... which was created from an online webinar I did (the online room uses a program called - Conference Recording Service) - which creates an avi file.
I try to bring it into VSPro 4 but it tells me - "xxx file is inaccessible" followed by the message "This file cannot be added to the project due to unknown file format or not enough memory or copyright".
I can play this file in Windows Media Player ...I thought VS works with avi files?
I can't open an AVI file any more. switched to QuickTime 7.5.5 but still doesn't work.
View 3 Replies View RelatedVideostudio 11+ won't load any .avi files,it just gives the message 'catastrophic failure'. Even if I scan the dv tape with the program it will save the files as avi but it still won't let me use them.
View 4 Replies View Related