I have cdr file with 250 pages of A4 size. How can I resize the whole document with reduction of 79% i,e approx 6.75x9.5 inch. I would like to reduce all element in proportional ie, line thickness, bitmaps, paragraphs.
View 5 Replies
I have an image that I imported was (600 x 400) Pixels, I made it smaller using (Pick tool) to be (100 x 67) Pixels, the question is, how can I make it to (100 x 67) Pixels while saving? I have 40 images to do that!
View 3 Replies View RelatedSay I have many rounds disks distributed in a square.
When I select them all and resize the "container" to a rectangle, I get the disks reshaped into ellipses.
How can I prevent this and maintain them round while resizing the container?
When I place an object on the stage, I can move or resize is uzing the handles. However when I enter the coordinates or dimensions manualy nothing hapens.
I already tried to reset the workspace (F8 during startup).
When I resize an object (for example, I want to extend a horizontal line by 20%, using the % boxes in the property bar), the resizing action is executed from the center of the object itself (so, 10% to the left and 10% to the right in my example).
If that object is snapped to other objects, resizing from the center automatically unsnaps them and so snapping must be done again.
Is there a quick way (such as double clicking a node, or so) to resize an object not from its center, but from a side or a vertex of it?
Is there a way to resize a powerclip container that keeps the contents at its original size - so you can view more or less of the contents simply by changing the shape of the container?
(Rather than editing the contents or extracting the contents and then resizing the container).
I am having an issue with X6 installed on my laptop. When I try to save, the dialog pops up and flashes at a high rate and seems to be continually re-sizing. The only remedy seems to be to kill the process and lose the work. I am running Windows 7 Home Premium service pack 1 (32-bit) and release 16.2.0.998 of Corel Draw. This is not the demo version, it is a purchased license.
View 1 Replies View RelatedI'm trying to find a way to do this:
Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.
It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.
What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.
Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.
When I open a new file, my default is an 8.5" x 11" page. When I resize it for an order, the view is staying at the 100% view, yet the same operation in version 11 gives me a view as if I had entered the standard CTRL + F4.
View 5 Replies View RelatedMy Nikon P100 produces videos with the extension MOV. When I run them on an older laptop that I use to drive slide shows, they run very slowly. I think that's because the file sizes are too large. Will VideoStudio allow me to resize the videos, in much the same way that PaintShop lets me resize photos? I want to know this before I buy it.
View 1 Replies View RelatedHow can I resize multiple (236) circles about their own centerpoints without resizing them each by each?
I´dd like to increase radius about 2-5%.
We do a lot of artwork for screenprinting that needs to generally be 11" tall for adult shirts and 9" tall for kids sizes.
I recorded a macro that basically copies everything on the 11" page onto a new page, pastes the graphic and then resizes it to 9" tall. The problem is that when it resizes, it doesn't seem to keep the proportions.
For example, if I have a circle that is 11"x11" and use my macro, I would expect it to be resized to 9"x9"
Instead, after using my macro, the circle is resized to 9" tall by 8.36" wide.
Did I make a mistake somewhere when recording this macro? I'm not a pro at deciphering macro scripts so I've attached it here:
Sub Kids_Size() ' Recorded 6/30/2011 ActivePage.Shapes.All.CreateSelection ActiveSelection.Copy Dim p1 As Page Set p1 = ActiveDocument.InsertPagesEx(1, False, ActivePage.Index, 11#, 17#) p1.Layers("Layer 1").Paste Dim Paste1 As ShapeRange Set Paste1 = ActiveSelectionRange ActiveDocument.ReferencePoint = cdrCenter Paste1.SetSize 8.360346, 8.999996End Sub
I am attempting to save a PDF file (was JPG and converted to Vector and saved as PDF) as a SWF file. I need to resize it down to 80px x 80px.When I goto save for Web & Devices and change to SWF --> Image Size (tab): the new size (width and height) are greyed out and I cannot change them.
View 2 Replies View RelatedIs it possible, to resize pictures (PNG, JPG) as an automated action to a specific filesize.
View 12 Replies View RelatedElements 12, becuase I got allways a Error Message. I found a really good Tutorial, about this problem and did it step by step:
open as... choose picture(eps)... chose OPEN AS -TIFF...
Now I can edit the picture.
I resize the picture to more than 10000px. After this work the picture looked like ... unsharp.... I saw the pixel and I thounght that was the side-effect of the resize.
I was by a friend, who has the photoshop cs6 software(Stundent...) yesterday. I took the same eps file and opened it in his version. The result is unthinkable. The picture looked very great. I didn't see andy pixel. It looked sharp. Whats the reason for this difference?
I could resize the picture like a skyscraper and it looks alway very great.
I got my logo and the online company sent it in low resolution, I asked for the proper resolution for my web page and the company sent me this :
The AI (Vector) file(s) in the zip file are to be utilized for all high-res. And commercial printing applications. It is an Adobe Illustrator file and can only be opened and/or utilized if you have this professional design software. All commercial printers will have access to utilize these files.
I got the adobe illustrator and I am trying to fix the logo and just can not get the size.
I have the following Adobe Illustrator file: [URL] .....
I would like to copy all visible elements of this file, and paste them onto a new file whose size is that of a standard business card. To do this I create the business card AI file in illustrator and then paste the contents of the AI file listed above onto the file with the business card artboard. SINCE THE ARTBOARD IS MUCH SMALLER, I Select -> All and Resize to 2%.
A. What I don't understand is why the bordeaux square in the middle does not resize proportionally when I carry out this operation. Instead it completely shrinks to a much smaller size.
B. Furthermore, I would like to completely get rid of the orange area that falls outside of the artboard. How can I accomplish this second task?
I am having a very strange problem in illustrator and I can't work out what is wrong.
Before in a previous version when I embedded a barcode into an .ai file the barcode was fine but now in my new CS6 the stroke sizes go "mad" and resize?
Is there some sort of setting I am not selecting? I need to embed ALL images / barcodes into the packaging design as I need to send it to china for printing. (and create outlines - but can't do this until the barcode has first been embedded)
I take a large number of event images and the usual client request for images being sent to the press is image size rather than resolution, dimensions or other requirements.
Clearly in LR3 if the client has requested 3MB jpg the easy option is to after processing take my Canon 5d mkii RAW file and just hit export to max 3MB jpg.
My question is is it better - ie image quality better - to export by resizing longest edge to approx 3000 px and exporting to jpg which results in a similar file size, though different pixel dimensions? Or are they effectively the same?
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
I would like to resize and watermark all of the image in a particular file. I understand that I can do this with Lightroom, but I do now know how.
View 1 Replies View RelatedIt has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit)
Adobe Illustrator CC 17.1.0 (64 bit)
I have a client who has a set of .ai files they need resized to meet various epub layout specs. Apple and Kindle both are different sizes so I need to know the best way to resize an .ai file 11.25 x 5.65 inches into a smaller dimension in pixels while retaining the layers.
View 9 Replies View RelatedIn previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
I´m trying to extract text from a Corel file to a TXT file in another editor and then merge it back in.Extracting the text seems to be working just fine but when I´m trying to merge it back in I get the error message "Wrong file format or could not open".
View 2 Replies View RelatedWhy, if a file is 11MB, would the print file be 90MB?
View 10 Replies View RelatedAfter finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
I have trouble with file size, example I design a poster say 120mb and open existing poster 200mb so that i can copy certain images and text from it and even though I delete the second poster before the saving the new poster but the file size becomes 320mb?
So I thought there was something worng with my machine i.e a virus.
I repeated the example above and removed all the images and all background and left the text on the poster and save the final poster with text only but the file size is same i.e. 320mb?
I am trying to export my corel draw x6 file as a dxf or dwg file to import into sketchup. When I do this it drastically alters the lines in my drawing. It did not do this in x4. I know that it changes my curves into a bunch of line segments and I am okay with that. What I have a problem with is that it is changing my straight lines into line segments that are not straight. Any way to successfully import my corel drawing into sketchup?
View 2 Replies View RelatedI was working on my wedding album and had half of it done. The file size is 2.08 GB -- huge I know, and every time I saved the file or the autosave feature came on it took several minutes. I closed the file and tried to re-open it but all I got was a blank standard sized page. The same thing happened with the back-up.
I desperately need to submit the album pages in the next 12 hours or I lose the money I prepaid with the printer. I tried renaming the file as a .zip and then went into one of the folders and opened the riffData.cdr file, but no luck there. I also tried opening a new CDR file and importing the old one, but that didn't work.
