VideoStudio :: Using V4 With Panasonic MT2S Files?
Oct 10, 2011
Have put VideoStudio4 on my PC.I'm trying to use it with a new Panasonic HDC SD900.
I used the camera's software to download my video files on to my PC.
Corel VideoStudio 4 has a capture mode and an edit mode. I’d been using edit and then trying to browse for my files so I could add them into my library for use in that film. It couldn’t see the .mt2s files.
I’ve now tried connecting the camcorder and using Corel’s capture mode. Someone had suggested that to find my files I needed to follow private, then AVCHD, then choose BDMV, then choose the folder STREAM. But there’s nothing there.
View 5 Replies
ADVERTISEMENT
Aug 22, 2012
Earlier this year I purchased a Panasonic HDC-DS800 high definition camcorder. After years of editing ATI files, I'm going to use my VideoStudio (X4) to edit AVCHD files.
To get the files from the camcorder to the computer, there are 2 options. One is to go directly to the SD card on the camcorder through the My Computer option. This gives me .MTS files, which I can transfer to my hard drive.
The other option is to use the software supplied with the camcorder, which is HD Writer AE 3.0. This transfers to my hard drive .m2ts files. Along with the .m2ts files, it also transfers (or creates) .tmb files, .pmpd files, and .cont files.
View 8 Replies
View Related
Oct 2, 2010
Just got a new Panasonic SD700. It should effectively be the same as the other Panasonic 700 camcorders like TM700 and HS700, but this one stores on memory cards only.
Now, with my VS 11.5+ (Windows XP SP3), clips whose length is 1 minute or less work fine, clips that are 2 minutes cause my VS 11.5+ to crash when I try to preview them. So, I can insert all my clips in the VS timeline. SmartProxy is on and with SmartProxy Manager I can check that the proxy files are created (although it takes a very long time).
Then I do nothing but try to play a preview of the clips. Clips that are 1 minutes or less play well. Then I have two clips that are almost exactly 2 minutes. These 2-minute clips play for some 5 or 6 seconds, then the picture halts but sound goes on for another few seconds and at roughly 10 - 12 seconds I get the typical message "this software failed, do you want to send a report to Microsoft ".
The same problem occurs whether I directly copy the MTS files from the memory card and then insert in my timeline in VS or download the clips to my hard disc with the HD Writer software that shipped with the camera and that renames them to M2TS.
This is repeatable. Rebooting does not work. I installed the latest directx today. The total duration of my test projects have been 2 - 4 minutes.All my test clips are 1920 x 1080i PAL, with a bit rate of 16800. The Panasonic software is able to play the clips well. Project settings are default DVD.
I'd like to be able to make AVCHD discs of my footage as well as standard DVDs for friends and family who don't have BlueRays yet. A year ago I was able to edit some footage from a friend's camcorder and produce both DVDs and AVCHD discs from that material. The clip properties then were close to the same as what I am using today. But now I cannot even get started.
View 14 Replies
View Related
Nov 27, 2012
VSX4 can not open .MP4 files captured in high speed with Panasonic fz-200.
View 2 Replies
View Related
Jan 2, 2014
PSE 12 has a new feature under Preferences/Camera or Card Reader called "Alutomatically Stack RAW and JPEG." Checking this will stack a RAW & JPEG file combination, i.e., when shooting with the camera's RAW + JPEG setting checked. In my case PSE 12 appears to stack my Panasonic RAW files and each JPEG thumbnail shows the right facing arrow to expand the stack. When I click the arrow the arrow disappears but the stack does not expand to reveal the RAW file. The RAW file still exists on the hard drive, but I can't find any way to reveal it in PSE (I've not tried to re-import the RAW files because there are a lot of files in a lot of folders.) This is rather critical and needs to be fixed.
View 11 Replies
View Related
May 21, 2012
Following Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
View 6 Replies
View Related
Nov 9, 2010
I'm running VSproX2 and I'm trying to capture video from my Panasonic DVX100 camera. I have some Christmas stuff I want to edit. I cant seem to get VS to recognize the Camera. I dont know if it's a setting in the camera or a bad firewire (4pin) port.
Does the camera need a driver to be loaded? Should the PC have recognized the Camera when it was plugged in (like USB devices)?
I have the camera set to VCR mode. In VS, I go to Capture and select Capture Video. It says "Either no device is installed, or the device is not connected". Nothing is listed in Source or Format.
View 14 Replies
View Related
Jul 25, 2012
I have just upgraded to VideoStudio Pro 5 (from 4) as 1080/50p editing is now available in the upgrade; I shoot my source footage on a Panasonic HS900. Whilst I will edit my footage at 50p I cannot, of course, create a video file to burn to a BD without losing image quality, with Blu Ray only accepting a 24 fps frame rate. I understand after editing my footage in 50p I will then need to re-encode the video file to back to 24 fps if I am to maintain full '1080' quality and I'm wondering which of the 'drop-down' video file templates I should be using to achieve this?
I cannot seem to find anything in FAQ that exactly 'hits the spot'.
View 8 Replies
View Related
Aug 13, 2013
Here is Mediainfo for file that VS X6 nor X5 can handle. It simply dies as soon as the file is placed on the timeline. Any reason this Panasonic GH3 created file can't be used in VS? (60p editing is enabled)
General
Complete name : P1020993.MP4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 70.1 MiB
Duration : 21s 21ms
[Code] ......
View 13 Replies
View Related
Aug 27, 2012
I'm using Panasonic NVGS-25 camera + windows7 home premium + videostudio X5. When i connect my cam via FireWire, system see it and opens new window with proposition to capture video with VideoStudio, but when VS runs, it says that no devices detected or no drivers for it.
View 2 Replies
View Related
Jul 7, 2012
I have VSP X4 Ultimate and a Panasonic TM900K. I have been recording mostly in 1080p for the best quality, but I have notice when compared to VLC or another editor, the preview window's quality is very poor. On my 1080P monitor it looks no better than a DVD. This, in of itself, is not a big issue, but it does make it hard to use VSP X4 to do fine video corrections.
The one that is is when I play down-converted videos from VSP X4 (To 7Kbps DVD) the quality is visibly worse than with my other editor. I have been testing on my playstation (just playing the mpeg 2 files via my media server) (the PS3 is set not to up-convert). When I try to do the same thing on my computer using VLC I do not see much of a difference, but VLC is doing a lot to render on the PC (de-interlacing and all).
View 9 Replies
View Related
Dec 9, 2012
I can't open raw files from my new panasonic lumix fz 200 with photoshop CS4 on my mac. I downloaded the 7.2 DNG converter and still cannot open the files. Does the converter work with CS4? Is there something else that I should use? Is there a special place to put the converter file?
View 2 Replies
View Related
Feb 21, 2013
My Adobe CS5 can't read RAW files I'm attempting to PP in it from two new cameras. What good is having software that is suppose to be able to read RAW files when it won't for new equipment. Surely it should be able to adapt to newer cameras as they come along.Today I tried downloading a sample RAW file from a online review of the new Canon 5D Mark iii. It starts to open in CS5 but then says it can't read RAW files from this camera either. How do I change that in my Photoshop CS5. I havn't tried it in Elements 10 yet. will it do the same thing and will I need to change the settings there too? I can post process RAW files from my Canon XSi and XTi without any problem.
View 4 Replies
View Related
Sep 8, 2013
I want to use Photoshop CS6 ( all updates installed ) for editing my videos captured by the Panasonic GH2 camera. I tried all ways of opening the video0001.mts file known to me ( pressing the + symbol, pressing the little film symbol, open as layers ) , and the video itself is shown and played in PS, but the the sound is switched to off and cannot be switched on.
Is there any special setting required or will I have toinstall a special codec for these files ? As the camera is pretty old, I thought for a full compatibility with CS6.
View 2 Replies
View Related
Feb 25, 2014
How do I open Panasonic RW2 files in both Photoshop Elements 9.03. and Photoshop CS4. My camera is Panasonic Lumix DMC-FX70.
View 1 Replies
View Related
Jul 7, 2013
why cant itransfer raw files from my panasonic g3
View 1 Replies
View Related
Nov 1, 2013
will LR 5 read files from a Panasonic fz200?
View 1 Replies
View Related
Oct 21, 2012
Does Lightroom 3 support Panasonic DMC FZ200 RAW files? I think the update for LR 4.2 does. But I still have LR 3 and do not wish to upgrade right now.
View 1 Replies
View Related
Feb 1, 2013
I am trying to use Elements 10 to convert Panasonic RAW files to JPEGs for web use. The batch runs, but prompts for a "save" location at every file. I have reinstalled Elements, reinstalled the Camera RAW update, and have ensured I have ownership of source and destination folders (in Windows 7).
I have tried several folders, set up test folders etc. and nothing seems to work.
View 2 Replies
View Related
Mar 11, 2012
Just purchased this camera, and use primarily Lightroom to edit. When downloading my images, although I shot it RAW (which is why I bought this camera) it converted it to JPEG's. I also just upgraded to Lightroom 4, which will arrive shortly. Whether Lightroom 4 supports RAW in this camera?
View 7 Replies
View Related
Oct 6, 2012
I am locking for a raw Plugin for the Panasonic Lumix G5. Where i can find it?
View 4 Replies
View Related
Aug 4, 2012
I am having a issue when importing raw from DMC-G2, with pictures becoming blurry/shifted after import. They seem fine for a split second before it shifts and becomes considerably more blurry.
I compared the export to the original jpeg and there is a huge difference with the original jpeg being more clear and sharp than the exported one.
At first I thought it was the camera but all the jpegs are fine. Reset and updated camera firmware. Reset preference and reinstalled Lightroom 4. Same problem.
View 1 Replies
View Related
Mar 12, 2012
How and where to get profile for lens Panasonic 3/4 for LR4
View 2 Replies
View Related
Sep 17, 2013
The GX7 is scheduled to come out at the end of September, and it sounds like MFT is finally getting it just right. I have several Panasonic and Pansonic/Leica lenses I use with the GF1 and have ordered the GX7, but when will I be able to work on its RAW files in LR and ACR? How long does it take to get a camera into an RC version?
View 1 Replies
View Related
Oct 3, 2013
I have a Panasonic FZ120 and a Panasonic G5. Can you download and install the RAW Plugin on this computer?
View 2 Replies
View Related
Apr 6, 2011
I have a few panasonic cameras and i love paint.net....i was wondering, how to write a plugin to load panasonic(.RW2) raw photo files...
View 19 Replies
View Related
Dec 3, 2012
I've bought a Panasonic Lumix DMC-LX7 camera. As I want to preserve the best format picture, I want to save in raw-format. Elements 10 doesn't seem to be able to import raw from this camera. I could use Raw Converter, but naturally I want to use the import function from the Elements suite. Is there any way I could make this work on my MacBook Pro?
View 2 Replies
View Related
Feb 20, 2013
My camera is a Panasonic Lumix DMC-FZ28 and I'd like to take pictures using the RAW format. I bought it in 2008.
There's no lens profile for this camera, and I was told that when I import pictures in LR (my version is 3.6), lens corrections are automatically applied.
I've tried and it seems that for exemple CA is not corrected in LR3.6.
Is my camera too old? Do I have to buy a newer version of LR?
View 2 Replies
View Related
Sep 2, 2012
Is it possible to capture raw images from a Panasonic FZ40 onto Elements 7?
View 2 Replies
View Related
Mar 18, 2014
Premiere Elements 12 for Mac. Software version 10.9.2. imported movies from Panasonic HDC-SD600 setting HA1080i 25fps are pixelated and/or verticals are fuzzy. If importing using same camera but in 1080p 50fps movies are not pixelated and with very little fuzzy vertical lines. I am very disapointed as I have no problem with iMovie!
View 1 Replies
View Related
May 8, 2012
How can i see all my photo properties taken with a the panasonic FZ150 into the exif in Lr4.
In the free software which came with my camera (photofunstudio) i see which recording mode is used (f.i. program AE of marco). But in LR4 i can't see that.
Is there a way to see it, perhaps a plugin.
View 11 Replies
View Related
