I can't open raw files from my new panasonic lumix fz 200 with photoshop CS4 on my mac. I downloaded the 7.2 DNG converter and still cannot open the files. Does the converter work with CS4? Is there something else that I should use? Is there a special place to put the converter file?
View 2 RepliesI am locking for a raw Plugin for the Panasonic Lumix G5. Where i can find it?
View 4 Replies View RelatedThe GX7 is scheduled to come out at the end of September, and it sounds like MFT is finally getting it just right. I have several Panasonic and Pansonic/Leica lenses I use with the GF1 and have ordered the GX7, but when will I be able to work on its RAW files in LR and ACR? How long does it take to get a camera into an RC version?
View 1 Replies View RelatedHow do I open Panasonic RW2 files in both Photoshop Elements 9.03. and Photoshop CS4. My camera is Panasonic Lumix DMC-FX70.
View 1 Replies View RelatedVSX4 can not open .MP4 files captured in high speed with Panasonic fz-200.
View 2 Replies View RelatedAll my RAW files taken with Lumix G1 are fine but the RAW files from my new camera (Lunix G5) won't open.Looking at help in E10, it says ACR is version 6.7.0.339..Elements 10 is version 10.0 (20110831.m.17215).
View 3 Replies View Relatedis it possible to open a RAW-file from the new Lumix LX7 with Elements 10?
View 3 Replies View RelatedPSE 12 has a new feature under Preferences/Camera or Card Reader called "Alutomatically Stack RAW and JPEG." Checking this will stack a RAW & JPEG file combination, i.e., when shooting with the camera's RAW + JPEG setting checked. In my case PSE 12 appears to stack my Panasonic RAW files and each JPEG thumbnail shows the right facing arrow to expand the stack. When I click the arrow the arrow disappears but the stack does not expand to reveal the RAW file. The RAW file still exists on the hard drive, but I can't find any way to reveal it in PSE (I've not tried to re-import the RAW files because there are a lot of files in a lot of folders.) This is rather critical and needs to be fixed.
View 11 Replies View RelatedMy Lightroom 3 will not download raw files from Panasonic Lumix dmc-fz200. This there any specific patch i need to download?
View 2 Replies View RelatedMy Adobe CS5 can't read RAW files I'm attempting to PP in it from two new cameras. What good is having software that is suppose to be able to read RAW files when it won't for new equipment. Surely it should be able to adapt to newer cameras as they come along.Today I tried downloading a sample RAW file from a online review of the new Canon 5D Mark iii. It starts to open in CS5 but then says it can't read RAW files from this camera either. How do I change that in my Photoshop CS5. I havn't tried it in Elements 10 yet. will it do the same thing and will I need to change the settings there too? I can post process RAW files from my Canon XSi and XTi without any problem.
View 4 Replies View RelatedI want to use Photoshop CS6 ( all updates installed ) for editing my videos captured by the Panasonic GH2 camera. I tried all ways of opening the video0001.mts file known to me ( pressing the + symbol, pressing the little film symbol, open as layers ) , and the video itself is shown and played in PS, but the the sound is switched to off and cannot be switched on.
Is there any special setting required or will I have toinstall a special codec for these files ? As the camera is pretty old, I thought for a full compatibility with CS6.
why cant itransfer raw files from my panasonic g3
View 1 Replies View RelatedI am trying to use Elements 10 to convert Panasonic RAW files to JPEGs for web use. The batch runs, but prompts for a "save" location at every file. I have reinstalled Elements, reinstalled the Camera RAW update, and have ensured I have ownership of source and destination folders (in Windows 7).
I have tried several folders, set up test folders etc. and nothing seems to work.
Earlier this year I purchased a Panasonic HDC-DS800 high definition camcorder. After years of editing ATI files, I'm going to use my VideoStudio (X4) to edit AVCHD files.
To get the files from the camcorder to the computer, there are 2 options. One is to go directly to the SD card on the camcorder through the My Computer option. This gives me .MTS files, which I can transfer to my hard drive.
The other option is to use the software supplied with the camcorder, which is HD Writer AE 3.0. This transfers to my hard drive .m2ts files. Along with the .m2ts files, it also transfers (or creates) .tmb files, .pmpd files, and .cont files.
Have put VideoStudio4 on my PC.I'm trying to use it with a new Panasonic HDC SD900.
I used the camera's software to download my video files on to my PC.
Corel VideoStudio 4 has a capture mode and an edit mode. I’d been using edit and then trying to browse for my files so I could add them into my library for use in that film. It couldn’t see the .mt2s files.
I’ve now tried connecting the camcorder and using Corel’s capture mode. Someone had suggested that to find my files I needed to follow private, then AVCHD, then choose BDMV, then choose the folder STREAM. But there’s nothing there.
Just got a new Panasonic SD700. It should effectively be the same as the other Panasonic 700 camcorders like TM700 and HS700, but this one stores on memory cards only.
Now, with my VS 11.5+ (Windows XP SP3), clips whose length is 1 minute or less work fine, clips that are 2 minutes cause my VS 11.5+ to crash when I try to preview them. So, I can insert all my clips in the VS timeline. SmartProxy is on and with SmartProxy Manager I can check that the proxy files are created (although it takes a very long time).
Then I do nothing but try to play a preview of the clips. Clips that are 1 minutes or less play well. Then I have two clips that are almost exactly 2 minutes. These 2-minute clips play for some 5 or 6 seconds, then the picture halts but sound goes on for another few seconds and at roughly 10 - 12 seconds I get the typical message "this software failed, do you want to send a report to Microsoft ".
The same problem occurs whether I directly copy the MTS files from the memory card and then insert in my timeline in VS or download the clips to my hard disc with the HD Writer software that shipped with the camera and that renames them to M2TS.
This is repeatable. Rebooting does not work. I installed the latest directx today. The total duration of my test projects have been 2 - 4 minutes.All my test clips are 1920 x 1080i PAL, with a bit rate of 16800. The Panasonic software is able to play the clips well. Project settings are default DVD.
I'd like to be able to make AVCHD discs of my footage as well as standard DVDs for friends and family who don't have BlueRays yet. A year ago I was able to edit some footage from a friend's camcorder and produce both DVDs and AVCHD discs from that material. The clip properties then were close to the same as what I am using today. But now I cannot even get started.
will LR 5 read files from a Panasonic fz200?
View 1 Replies View RelatedDoes Lightroom 3 support Panasonic DMC FZ200 RAW files? I think the update for LR 4.2 does. But I still have LR 3 and do not wish to upgrade right now.
View 1 Replies View RelatedJust purchased this camera, and use primarily Lightroom to edit. When downloading my images, although I shot it RAW (which is why I bought this camera) it converted it to JPEG's. I also just upgraded to Lightroom 4, which will arrive shortly. Whether Lightroom 4 supports RAW in this camera?
View 7 Replies View RelatedI just installed DNG converter 7.2, which is supposed to work with my new Lumix DMC-G5. However, DNG converter does not see the Lumix rw2 raw files when I open a folder containing the files.
View 3 Replies View RelatedPhotoshop Elements 9 can not open RAW-files from Panasonic Lumix LX7. Any updates? use win 7/64
View 2 Replies View RelatedHogw can I import raw file from Lumix GH3 into Element 11's Organizer. At this point I am receivin the following message : THE FORMAT IS DAMAGED OR IS A FORMAT THAT CANNOT INCLUDED IN ELEMENT (11) ORGANIZER
View 1 Replies View RelatedWe are unable to get image processor in Bridge to allow us to make raw image processing changes to our GF-2 images. Instead of opening in Camera Raw Processor, it just opens the images. How can we change this?
View 4 Replies View RelatedI'm new to these forums and still coming up to speed with Lightroom (love it so far!). I recently purchased a Lumix ZS25 and there isn't a profile in Lightroom for Panasonic cameras. I did see several Leica profiles (my camera has a Leica lens). Just wondering if you skip lens correction if your profile isn't offered, or what are the specs to create a custom lens correction for my model.
View 2 Replies View RelatedWhy is Adobe Standard the only profile choice in Lightroom for a Lumix fz150?
View 2 Replies View RelatedI am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
I have a Panasonic FZ120 and a Panasonic G5. Can you download and install the RAW Plugin on this computer?
View 2 Replies View RelatedI've bought a Panasonic Lumix DMC-LX7 camera. As I want to preserve the best format picture, I want to save in raw-format. Elements 10 doesn't seem to be able to import raw from this camera. I could use Raw Converter, but naturally I want to use the import function from the Elements suite. Is there any way I could make this work on my MacBook Pro?
View 2 Replies View RelatedAfter getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.
View 3 Replies View RelatedIs it possible to capture raw images from a Panasonic FZ40 onto Elements 7?
View 2 Replies View RelatedPremiere Elements 12 for Mac. Software version 10.9.2. imported movies from Panasonic HDC-SD600 setting HA1080i 25fps are pixelated and/or verticals are fuzzy. If importing using same camera but in 1080p 50fps movies are not pixelated and with very little fuzzy vertical lines. I am very disapointed as I have no problem with iMovie!
View 1 Replies View Related