Lightroom :: Catalog Not Recognized
Nov 11, 2012
I am trying to upgrade gtom LR 1.0 version to 4.1 version and my catlog is not being recognized for upgrade. I launch LR, select my NAME.IRCAT catlog and get this message: " The Ligghtroom catalog named "Lightroom Catalog" cannot be opneded because it is not valid. Would you like to select a different catalog?"
I wonder if need to upgrade to some lower version befor moving to 4.1. I have not upgraded in many years, actually I never upgraded since I first purchased LR. I finally purchased a new PC and upgraded my OS, and consequently decided to upgrade all my most important SW.
View 4 Replies
ADVERTISEMENT
Nov 8, 2013
I think this question should be so easy to answer, that I am feeling a bit foolish for asking, but here goes. I am trying to set my pressure pipe catalog, but when I browse to C:ProgramDataAutodeskC3D 2014enuPressure Pipes Catalog and hit open, I get a dialogue that states "There are no Pressure Network Catalogs in this folder". I have tried selecting folders farther down the list (Imperial, Imperial_AWWA_Flanged, etc) with no success. I have opened the sqlite files using the Content Editor, and I can see all the parts and sizes there. I just can't figure out how to open the catalog from Civil 3D.
C3D 2014, SP1
Dell Precision T3500, Windows 7 64-bit
View 7 Replies
View Related
Jan 13, 2011
I don't want to have the original files on both laptop and desktop.
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
View 2 Replies
View Related
Jan 15, 2014
I will be managing a small portion of a client's overall image workflow by updating their web prescence on a regular basis with new work and retagging/uploading old work. I believe this requires the catalog and the image library to be housed on an external hard drive that can travel between the two of us. We are both working on PC's with LR 5.3.
The workflow would look something like this:
Client downloads new images onto external hard drive and imports into LR "ClientCatalog" is created Flags Picks and Creates a Collection from those Picks.Hard drive is handed off to me where I open "ClientCatalog".Make suggested edits to images add detailed tags and metadata upload to various social media sites and websites return hard drive to client
Is there potential problem with this workflow? My assumption is that if everything is housed on the external hard drive then there are no worries about the catalog containing all the latest updates. Are there any "safety protocols" you would add in to this workflow (besides mirroring everythign on another hard drive)?
View 5 Replies
View Related
Dec 15, 2012
I'm using Lightroom 1. I tried to merge catalogs by importing a catalog into a master catalog, but there were some problems. The one I noticed immediately was that the collections are not correct. It imported the collections, but for example one collection now has only 4 photos when the originbal had 140? How can I fix that? (Although not necessariy a problem, it seems to have the wrong number of photos imported too. It says the previous import was 3175 photos when it was more like 10,000.)
View 2 Replies
View Related
Apr 29, 2013
I had to reinstall an OS in my computer due to a virus. As a result LR 3 in no longer installed. I still have the catalog on a backup disk and have just installed and updated to LR 4.4. What is the best way to merge the V3 catalog with V4 and are there any things I should expect or look out for?
View 2 Replies
View Related
Sep 20, 2013
I use LR5 and downloaded LR5.2 but when I try to open it I get the message "File not recognised".
View 2 Replies
View Related
Feb 21, 2014
At work, on a Windows 7 laptop, I used the Adobe Lens Profile Creator utility to make an LCP file for a Nikon 1 6.7-13mm zoom lens. After submitting that LCP file to adobe via email, I copied it to my Dropbox. At home, on my Mac OS X 10.8.5, I copied the LCP file from the Dropbox to:
LibraryApplication SupportAdobeCamera RawLens Profiles1.0
Then I launched LR 5.3, navigated to a raw (NEF) image shot with this lens, and attempted to apply the lens correction in the Develop pane. Although the Library correctly shows the meta data for the lens and camera, the Lens Correction section in Develop does not even list that lenses LCP file in the drop down menu. Instead, LR attempts to apply a different lens profile which does not match the focal length of the zoom. I'm wondering if the LCP file that I created will only work on a Windows PC since that is where it was created?
View 3 Replies
View Related
Mar 29, 2014
I just got a new camera this week - a Nikon D610. I have Adobe Lightroom 5 and have processed my RAW files from my last camera with no problem. However, when I went to import my files just now, it tells me it is not supported. I checked for updates, it said no updates are available (it is version 5.3). I checked to see if D610 is supported and it is.
View 5 Replies
View Related
May 27, 2012
I am trying to import raw files captured with a canon 5D mark III but getting message the files are from a camera which is not recognized byt the raw format support in Lighroom. I have checked that I have the latest addition of LR 3.
View 1 Replies
View Related
Mar 12, 2014
My Sony RX1R is not recognized by lightroom 5.3. In the import window it appears a "no name", and the images on the cam are not recognized. What should I do?
View 6 Replies
View Related
Jan 17, 2014
I use a custom picture style when shooting to get a flat look for post editing. In Lightroom 5, under Camera calibration, which profile do i select to use MY CUSTOM picture style: adobe standard, camera faithful, camera landscape, camera neutral , camera portrait, camera standard?
View 9 Replies
View Related
Oct 18, 2012
I have latest version of LR4. Photos downloaded from card reader and two different cards show grayed image with note "preview unavailable". I see this question has come up with Nikon D800. Do I need to wait for adobe to update for Nikon d600 before I can use my cool new camera?
View 6 Replies
View Related
Feb 10, 2013
They're suppose to be the same as EOS-1D X files and LR and CR opens these files fine.
View 5 Replies
View Related
Apr 2, 2014
Are the keywords in Lightroom recognized by Google analytics?
View 6 Replies
View Related
Mar 18, 2013
I get the following error message "the files are not recognized by the raw format support in Lightroom (242)" Using 64bit windows 8 Having the same problem in Photoshop CS6
View 4 Replies
View Related
Jan 10, 2013
I have two external HDD's connected to my laptop. I'm using one LR catalog - it is stored on my laptop's SSD.
One external drive (Drive 'A') contains my photo archive - all of my photos. The other external drive (Drive 'B') is a mirror; a duplicate copy of all of the content on the first drive, incase it ever fails.
Q1: Why does LR only display drive 'A'? Even though both drives are on, connected, and working, only drive 'A' appears under the Folders tab. My concern: If - in the future - drive 'A' fails, I need to understand why LR isn't recognizing drive 'B'. Q2: On drive 'A', I right-clicked on the highest level folder in my heirarchy and chose 'Synchronize Folder'. New photos were imported, and old photos were removed. I also made some additional edits to photos on this drive. If drive 'A' ever fails and I need to switch over to my mirrored drive (Drive 'B'), do I also need to right-click on the highest level folder and choose 'Synchronize Folder'?
View 2 Replies
View Related
Nov 12, 2013
i have an 8 giga LR4 catalog (about 300000 images).just installed the new LR5 and tried openning the LR4 cat in LR 5.it said it needs to upgrade, but in the middle of the prosses i had this messege: "lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of LR"
i saw that there is an option to export all my LR4 catalog as a new catalog and than import it into LR5.i haven't tried that yet since i'm worry that i might loose some info. will this process (of exporting and importing) keep all my LR settings? like develop user presets, keywords and collections?
View 6 Replies
View Related
Feb 10, 2013
I only want ONE cataglog. Today I installed and upgraded Lightroom from v. 3 to v. 4.3 which was OK.I wanted to upgrade my ONE and ONLY existing catalog keeping the same name.LR created a second catalog and added a - 2 to the name and it's a .ircat.
How can I return to having only ONE catalog and library?
View 3 Replies
View Related
Dec 15, 2012
My catalog 3 did not transfer to catalog 4. I tried to manually transfer files. Now I have as many as eight copies of some pictures, none of others.
View 1 Replies
View Related
Dec 15, 2013
I'm using LR5 and have just bought a Ricoh GR.
When I try to upload RAW images LR either crashes or I get "file not recognized "
I have the import set to " copy to DNG file"
View 4 Replies
View Related
Sep 3, 2012
I use 2 external editors in my work. Nik SilverEfex Pro 2 and Portrait Professional. SE creates Tiffs to work on, PP creates PSD files. I can use both plugins fine and export and tweak my images. However, my problems start on the re-import stage.
So, I'm working in a Filtered list of files. They are filtered by the couples name (its a wedding). So I only see this couples wedding. I edit the files externally and they re-import. But - here's the problem, they don't show up. First off I thought that perhaps the metadata was not copied over. But it is. If I clear all filters, the images are there in the library. They also have all the metadata attached correctly and the star rating too. But, if I use the couples name to filter again - they refuse to appear in the selected group.
Solution - quit LR and restart it. Now they appear!The metadata clearly hasn't changed, it was clearly there. You can read the correct keywords are there assigned to the images, but the filter refuses to see those keywords until the program is restarted. As I dip in and out of SilverEfex many, many times during a wedding edit - this is infuriating to say the least.
View 1 Replies
View Related
Dec 16, 2012
After running 4.3 update, my local adjsutment brushes are no longer recognized and appearing in the Lightroom GUI. They are all still located under 'Lightroom' folder --> 'Local Adjustment Brushes' folder (nothing has changed and I see all files are still there in Finder), but no matter how many times I've restarted LR, they are not showing up in the GUI.
View 5 Replies
View Related
Oct 1, 2012
I just started using Lightroom 4.1 Trial version (coming from Aperture). I exported JPEG versions of some images using an ICC profile. On my iMac running Lion 10.7.5 the pictures do not show a thumbnail, the file on the desktop just shows "JPEG". I could not open the file with the Preview App, but I am able to open it with DPP (Canon software)? Also the file shows that it has 0 x 0 dimentions when I click Get Info even though it is about 25 Megs in size?
The message I get is "The file “Edit-739820120223Canon EOS 7D.jpg” could not be opened. It may be damaged or use a file format that Preview doesn’t recognize."
View 14 Replies
View Related
Mar 12, 2013
I have a new MAC running 10.8 IOS and Lightroom 4.3. I also have a new Canon 5d Mark III. According to documentation Lightroom should recognize RAW files on the camera for download into Lightroom. But while I had success with only importing a single image amid multiple attempts, I cannot. Files are not recognized or cannot be converted to DMG for import. I took the card and put it into my old Rebel XT camera body, and it very slowly worked.
I have been using Lightroom with the old XT camera with no issues. Now I have a 1000 CF card and I can't get this to work from the camera. I have oredered a card reader which I have seen in other groups is supposed to solve this, but quite frankly: what the heck?
View 1 Replies
View Related
Feb 4, 2013
Example: New card, 100 photos taken, imported w/ name changes to LR catalog, all is well. Then, another 100 photos taken, and when import attempted, the prog "sees" 200 photos as new, not the actual 100 new photos on the card. Yes, the bottom is checked to avoid duplicates.
View 2 Replies
View Related
Aug 22, 2013
If I have more than 1 catalog, can I start Lightroom with different shortcut so when I click it will start the propper catalog inestead of going to close and reopen the other catalog?
View 2 Replies
View Related
Feb 15, 2013
If I create a LR Catalog on a macbook pro and then copy it to an external hard drive, can I then connect a PC to the external hard drive and open the catalog in Lightroom?
View 1 Replies
View Related
Mar 6, 2012
When I download LR 4 it subsumed my LR 4 beta catalog. How do I now get my LR 3.6 catalog into LR 4?
View 7 Replies
View Related
Jul 15, 2013
I am currently editing a large group of vacation photos using Lightroom 3. I have purchased a new computer and have installed Lightroom 5 on that computer. Can I copy the Lightroom 3 catalog to the new computer and use that catalog with Lightroom 5?
View 1 Replies
View Related
Jun 11, 2012
We have 2 PC desktop and 1 PC laptop computers. If I change to a Mac laptop, will the 4.1 LR catalogs be the same for all 3 systems?
View 9 Replies
View Related
