I only want ONE cataglog. Today I installed and upgraded Lightroom from v. 3 to v. 4.3 which was OK.I wanted to upgrade my ONE and ONLY existing catalog keeping the same name.LR created a second catalog and added a - 2 to the name and it's a .ircat.
How can I return to having only ONE catalog and library?
I'm using LR4.1 on both devices.
I just bought a MacBook Air as my travel device. I have a Windows laptop that I use for everyday activities and processing. I just did a shoot and imported my RAW files into a brand new catalog on the MBA. I flagged picks and did some processing (both heavy processing and light processing) on the MBA. I saved Metadata to file, ejected the external hard drive from the MBA and then hooked it up to the Windows device.
Issue #1: I cannot open the new catalog created on the MBA on my Windows device. It just fails.
Issue #2: When I simply synchronize the drive to the Windows laptop, the files do come in and the processing that I did comes in too. However, the flags do not transport. And, any adjustments I did with the adjustment brush are not available for editing on the Windows laptor. (If I "reset" it does go back to the original RAW file, but before resetting, I have no access to the adjustement brush settings on the Windows device)
I don't want to have the original files on both laptop and desktop.
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
I will be managing a small portion of a client's overall image workflow by updating their web prescence on a regular basis with new work and retagging/uploading old work. I believe this requires the catalog and the image library to be housed on an external hard drive that can travel between the two of us. We are both working on PC's with LR 5.3.
The workflow would look something like this:
Client downloads new images onto external hard drive and imports into LR "ClientCatalog" is created Flags Picks and Creates a Collection from those Picks.Hard drive is handed off to me where I open "ClientCatalog".Make suggested edits to images add detailed tags and metadata upload to various social media sites and websites return hard drive to client
Is there potential problem with this workflow? My assumption is that if everything is housed on the external hard drive then there are no worries about the catalog containing all the latest updates. Are there any "safety protocols" you would add in to this workflow (besides mirroring everythign on another hard drive)?
I'm using Lightroom 1. I tried to merge catalogs by importing a catalog into a master catalog, but there were some problems. The one I noticed immediately was that the collections are not correct. It imported the collections, but for example one collection now has only 4 photos when the originbal had 140? How can I fix that? (Although not necessariy a problem, it seems to have the wrong number of photos imported too. It says the previous import was 3175 photos when it was more like 10,000.)
View 2 Replies View RelatedI had to reinstall an OS in my computer due to a virus. As a result LR 3 in no longer installed. I still have the catalog on a backup disk and have just installed and updated to LR 4.4. What is the best way to merge the V3 catalog with V4 and are there any things I should expect or look out for?
View 2 Replies View Relatedi have an 8 giga LR4 catalog (about 300000 images).just installed the new LR5 and tried openning the LR4 cat in LR 5.it said it needs to upgrade, but in the middle of the prosses i had this messege: "lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of LR"
i saw that there is an option to export all my LR4 catalog as a new catalog and than import it into LR5.i haven't tried that yet since i'm worry that i might loose some info. will this process (of exporting and importing) keep all my LR settings? like develop user presets, keywords and collections?
My catalog 3 did not transfer to catalog 4. I tried to manually transfer files. Now I have as many as eight copies of some pictures, none of others.
View 1 Replies View RelatedI create a Huge catalog in Photoshop Elements and need to split in small ones is this possible?
View 2 Replies View RelatedWe have 11000+ plus photos all carefully cataloged in Photoshop Album 1.0 on my old Windows XP PC. Our new PC is Windows 7 Home Premium with Photoshop Elements 9. How do I import our existing catalog and continue sorting our new photos into our old catalog?
View 1 Replies View RelatedMy latest battle with PSE11 is trying to access my catalog in PSE11 via the Catalog Manager but it doesn't show up in the list.
The catalog is named My Catalog 2 is located at C:ProgramDataAdobeElements OrganizerCatalogsMy Catalog 2. It is the only catalog I use and is the one that opens up when I launch Organizer. But, for the life of me, I can't get it to show up in the Catalog Manager. The only catalog that shows up is the original catalog which is at a different location and was created when I installed PSE11 on my new computer (Thinkpad W530, Windows 8). I've tried the Custom Location option and browsing to the location, but still no dice. This catalog has thousands of pictures and was converted from my previous PSE6 catalog. How do I get the Catalog Manager to find my current active catalog?
If I have more than 1 catalog, can I start Lightroom with different shortcut so when I click it will start the propper catalog inestead of going to close and reopen the other catalog?
View 2 Replies View RelatedIf I create a LR Catalog on a macbook pro and then copy it to an external hard drive, can I then connect a PC to the external hard drive and open the catalog in Lightroom?
View 1 Replies View RelatedWhen I download LR 4 it subsumed my LR 4 beta catalog. How do I now get my LR 3.6 catalog into LR 4?
View 7 Replies View RelatedI am currently editing a large group of vacation photos using Lightroom 3. I have purchased a new computer and have installed Lightroom 5 on that computer. Can I copy the Lightroom 3 catalog to the new computer and use that catalog with Lightroom 5?
View 1 Replies View RelatedWe have 2 PC desktop and 1 PC laptop computers. If I change to a Mac laptop, will the 4.1 LR catalogs be the same for all 3 systems?
View 9 Replies View RelatedI'm going to buy LR4. There are some old ircat files and catalogues created by LR 1.4 version. I wonder if it is possible to read these old catalogues by LR4?
View 7 Replies View RelatedI inadvertently had "copy" selected when I imported some photos from an external drive. They were copied to my computer's hard drive. I deleted the folder on my hard drive and the photos in lightroom. Now when I tried to import them using 'add' they are grayed out as if I already imported them. How do I delete the catalog now so I can re-import them the right way.
View 1 Replies View RelatedI've recently gone from pc to mac. I've imported photos from pc/elements 9 to mac/LR4. I'm in the process of getting the photos organized in LR4 when I got a message that my catalog was corrupt. When trying to repair I got a message that the catalog can not be repaired. I have not backed up my catalog.
It shows that my photos are on Macintosh HD / Users / bateson / Pictures / SteveLightroom4Pictures. Is there a way to fix or redo the catalog? Or do I need to start over and rebuild a new catalog by re-importing all the files to a new catalog? It has taken me a month to import and reorganized from elements 9.
Yesterday Bridge would not let me move files without shutting the program down after it moved the file. Today, I cannot find my catalog in LR4.2, nor can I find the backup, even though it has backed up every day.
View 12 Replies View RelatedI want to configure a new catalog in LR, but it is saying Light Room catalogs cannot be on network volumes or read-only folders
View 4 Replies View RelatedThis entire upgrade sucks! Took me forever to figure out how to get my catalog from 3.0 imported. Now I am missing plug ins, user presets in develop module, paper pre-sets in printer module. Why isn't everything imported? Why aren't all default settings imported? Why do I need to set up the layout etc. again. Horrible upgrade! I was on line with Adobe tech support. They say they know the problem, try back in a few days! I spent $79 to upgrade andthe product doesn't work!
View 19 Replies View RelatedI was importing into LR3 for the first time and while I was filling out info (renaming files), my MAC started to pinwheel. Finally I was forced to "force quit". Now when I try to relaunch LR from my alias or the HD it gives me this message; "LIghtroom cannot use the catalog because it is not writeable and cannot be opened".
View 2 Replies View RelatedI have some RAW images stored on a network drive, and I was working on them with my laptop. After completing the album, I removed the photos from the catalog on my laptop, so Lightroom wouldn't be so slow when I didn't have access to the network drive. This was short-sighted becuase I need access to those edits again, and I am wondering if I can re-import into the Lightroom catalog on my laptop and recover the edits.
View 3 Replies View RelatedDoes "Import from another catalog" import photos already in the target catalog (i.e. duplicates), or only photos not already there?
View 4 Replies View Relatedi just installed LR version 3.6 trial yesterday and it end up failling to upload the previous LR catalog that i install in past and crash,
attach here is the error picture.
i have try to uninstall + reinstall it but same problem occured. The worst part it i have deleted the lightroom catalog permanently in my pictures folder and the img catalog that attach in the pictures.
I am trying to upgrade gtom LR 1.0 version to 4.1 version and my catlog is not being recognized for upgrade. I launch LR, select my NAME.IRCAT catlog and get this message: " The Ligghtroom catalog named "Lightroom Catalog" cannot be opneded because it is not valid. Would you like to select a different catalog?"
I wonder if need to upgrade to some lower version befor moving to 4.1. I have not upgraded in many years, actually I never upgraded since I first purchased LR. I finally purchased a new PC and upgraded my OS, and consequently decided to upgrade all my most important SW.
After trying LR4 beta for about a month as a LR3 heavy user, my conclusion is there are features worth the upgrade, BUT I prefer the earlier Process Version and Basic Develop panel to the new one. I understand that I may choose not to upgrade the Process Version on photos in my present catalog as I import the catalog into LR4, thereby causing LR4 to look like LR3 for those preexisting photos. However, I'm unclear as to whether there is a way to configure LR4 so that it will import all new photos using PV2010, thereby continuing to develop them using the LR3 Basic panel and other develop controls. Does this option exist?
View 2 Replies View Relatedi cannot open a catalog it says its already open by an instance of lightroom all other catalogs open but they do not containe all my photos any info would be great i have shut down and restarted the computer but the problem is still there
View 2 Replies View RelatedAll of a sudden, Lightroom 3.6 won't create a new catalog for me. It worked for years but stopped working for no reason I can figure. I fill in the new catalog name in the dialog, click Save, then Lighroom restarts but tells me it can't find the new catalog name I just created. When I look in Explorer, I see that the folder has been created, but the catalog files were not.
Also, Lightroom didn't remember the last catalog opened when it starts. To test this, I located and opened a previous catalog, made some changes and quit Lightroom. When I restarted, it did not recall the previous catalog, but opened a much older one. I went to Edit->Preferences and changed the "open" setting to "Prompt me" (for a catalog name on open) but that didn't stick either.
I have lr 4 on my pc. I upgraded to lr 5 on my mac. I have the upgrade, but no catalog. I went back into adobe and downloaded lr 4 on my mac. Still no catalog.
Do I have to physically move the catalog from the PC to the mac and then apply the upgrade?