After running 4.3 update, my local adjsutment brushes are no longer recognized and appearing in the Lightroom GUI. They are all still located under 'Lightroom' folder --> 'Local Adjustment Brushes' folder (nothing has changed and I see all files are still there in Finder), but no matter how many times I've restarted LR, they are not showing up in the GUI.
View 5 RepliesI recently got LR4. I tried to put some brushes in the local adjustment folder and there is none! SO what do I do now. I've got pictures to edit and correct and I need these brushes...now.
Here is a screen shot of what is in my LR4 folder.
My (previously wonderful) local adjustment brush has apparently quit working. Whenever I attempt to make local adjustments - using either the standard presets or custom settings - all the adjustments made are applied to the entire image, not just locally. Density and flow are set to my typical values and Show Selected Mask Overlay shows the extent of the applied effect, but whatever adjustment I make is applied generally, over the entire photo, rather than to the selected adjustment area.
View 8 Replies View RelatedInstructions say that to delete an edit pin, click on it then press the Delete key. This removes the adjustment. I'm fininshed with my adjustments and just want to remove the pin. How do I do this and keep the adjustment?
View 2 Replies View RelatedI just downloaded the 5.2 beta and when trying to locate presets and use brushes, there Local Adjustment Folder did not download the with package. So I uninstalled and re-downloaded and it happened again.
View 1 Replies View RelatedIn the local adjustment brush, the noise slider default position is 0.Does it reduce more noise if the slider is in positive position or negative position .
View 4 Replies View RelatedUsing the local adjustment brush i can change the size of the brush using the [ and ] brackets However.. when i make a small error and want to erase brushed-area by using the ALT key then the brush size seems to be fixed to one size ?
View 1 Replies View RelatedI just downloaded a trial version of Lightroom 5. I want to change the white balance (temp and tint) using local adjustment brush but when I take a new brush, all I can change is
1. Exposure
2. Brightness
3. Contrast
4. Saturation
5. Clarity
6. Sharpness
7. Color
The Temp and Tint buttons that should appear on the top of this tool are not present. As shown below....
Similarly, as per some youtube videos, in the Basic tools, I should get
1. Highlights
2. Shadows
3. Whites
4. Blacks
Instead I get
1. Recovery
2. Fill light
3. Blacks
As shown below.
Why is there such differences in the option? Is this because it is a trial version?
After installing LR 3.2, the first thing I noticed is that it is much slower than the previous version (using XP Pro + 3GB memory and a speedy processor).
But the most terrible novelty of this version is that the Adjustment Brush is going berserk after a while:
It first slows down to a crawl, so slow that it's almost impossible to work with.While working with it after a while, it starts to show random rectangular areas that are copies of other areas of the image that have nothing to do with the area I'm working on. This happens after a brush stroke. The Undo command makes these rectangular "patches" disappear.From time to time, the whole image is flipped upside down (You can't believe it? Neither could I) eventually, after a brush stroke, the sandclock mouse cursor is displayed and the program freezes (at this time it can be using over 1 GB of memory although I'm working on a single, standard EOS 5D image). The only way to stop this madness is to kill the process. The Heal/Clone tool also shows a similar misbehavior. I didn't have these problems with the previous version.
1) Take a color image and apply a color-shift local adjustment to a portion of the image.
2) Convert the image to B&W.
Result -- The main image is converted to B&W, but the local adjustment doesn't change, i.e. it's still colored. Here's a trivial (and not-realistic) example of what happens:
My goal is to adjust the colors and the apply the B&W conversion to the entire processed image, not just the original piece. Is there a way to do this? I feel like I'm missing something small and easy.
I've a few local adjustment brush presets i tend to use a lot.Now i was wondering if it is possible to assign keyboard shortcuts to them for a faster workflow?
View 1 Replies View RelatedI have a new computer and would like to move my adjustment brushes from my old computer to my new computer i.e. teeth whitning.
View 4 Replies View RelatedI'm having an ongoing issue with Lightroom 4.4 when using adjustment brushes in the development module with RAW files from a Canon 5d Mark III Raw on a retina MacBook Pro running OS 10.8.3 When using the adjustment brush to make exposure adjustments, the adjusted area gets covered with tiny black speckles. I see it when trying to darken down highlights or when trying to lighten shadow areas. The heavier the adjustment, the worse the speckles get. I have taken the same original images and opened them in Photoshop and made similar local adjustments with curves and the images look fine, so it's definitely an error with Lightroom inserting the artifacts.
View 2 Replies View RelatedWhen I go to use my adjustment brushes, I would select the one I wanted to use and then go try to use it. As soon as I first let go of my mouse, the brush would change to custom. Since updating to 4.2, that has stopped switching, but my brushes still don't work. I have tried multiple brushes and it's all of them, not just one particular one. I have tried restoring my presets, that didn't work. I have tried deleting all of the presets from the folder, restarting Lightroom and re-importing them, that didn't work. I updated Lightroom, that didn't work. I have restarted my computer and that didn't work. The thing is, is that they HAVE worked before. I was switching between some catalogs and once I was done with that, they stopped working. So I'm not sure if I did something while switching between catalogs or not. I use these brushes all the time and they are a significant part of my workflow!
View 2 Replies View RelatedI have installed the trial version of Lightroom 4 but after upgrading my Lightroom 3 catalogue I am not able to access the new adjustment brushes such as noise etc. on any image from the upgraded catalogue - If I import a new image then all of the new functions are available. Is there something else I need to do to allow me to use the tools on the existing catalogue? I have tried deleting the “Lightroom 4 Catalog.lrcat” importing the catalogue from within LR 4but I get the same result.
View 4 Replies View RelatedSo I just downloaded and ran the updates for lightroom 3 (now 3.6) and now when I open folders to view my picture files, the canon raw files are no longer associated with lightroom. Let me further explain.
After shooting, I would plug my card into a card reader and see which pictures I wanted to view in lightroom. I shoot in jpeg and raw so I could view the jpeg thumbnails to see which raw files I wanted to open in lightroom. The raw files would be "labeled" with the LR icon and I would then doulbe click the raw file I wanted and by doing so it would initiate the opeing of LR. However, now the raw files do not have the LR icon assocaited with the raw files and I can longer clcik the raw files to automatically open lightroom.
Did something change with the update?
Elements 10 Organizer no longer recognizes HP Photosmart Plus scanner after attempt to install Inspiration upgrade. Inspiration would not recognize it, so I removed it and returned to PSE 10. What can I do?
View 1 Replies View RelatedI have a client, who use Lightroom.After software update, all his pre-defined custom brush settings are disappeared. It is possible to reload the old settings from somewhere?
View 2 Replies View RelatedWin 7 CS4..I was working on a Nikon raw .nef image in Smart Image mode when the following error message appeared out of the blue. "Unable to create local adjustment. All the local adjustment controls are set to have no effect on the image." Should I uninstall & reinstall CS4?
View 2 Replies View RelatedI was editing my images on RAW when all of a sudden I guess I pressed an incorrect key (yeah you know those split seconds where something happened and you dont know what you did) and now everytime I want to use the Graduated Filter tool or the Adjustment Brush tool and I press on top of the image it gives me the following message:ERROR:Unable to Create Local Adjustment. All the local adjustment controls are set to haveno effect on this imageIt doesnt work on ANY raw images now, I tried pressing "Reset Camera Raw Defaults" and it still doesnt work.Is there a setting that I moved without noticing?At the time this happened I had 6 pictures on camera Raw I had synchronized them and I was doing small adjustments to one of the images, I had finished using the Graduated Filter tool on an image when then all of a sudden it stopped working.
View 5 Replies View RelatedWhen working on an image in ACR, if you select one of the local adjustment tabs, such as Graduated Filter, and move any of the sliders on the right-hand side, any values you change will be retained if pressing 'Cancel', then opening the image again in ACR and selecting the same tab. I find this surprising, as I would have thought that by pressing 'Cancel', any adjusted settings, since opening the image on this occasion in ACR, would not be retained.
Furthermore, if you open another image in ACR and select the same local adjustment tab, the same settings that you adjusted in the other image have identical slider settings in that image as well.
I can see that this behaviour could be viewed as useful, i.e. when wanting to use the same local adjustment on multiple images, as any adjustment of the local adjustment's slider settings, on their own, will have no effect unless you actually perform the selected local adjustment to the image. But, as I say, I would have expected Photoshop to simply not retain any settings you have adjusted, since opening the image on this occasion in ACR, if you don't press 'Open Image' or 'Done', and simply press 'Cancel'.
From X3 to X4, Corel added a "Block Size" control to the Local Tone Mapping adjustment. Is it the number of pixels over which the contrast adjustment is being applied? It seems that the smaller block sizes reduce the effect's harshness (when it could be harsh, e.g., with faces).
Checked the manual and they forgot to mention it.
I made a significant change to an assembly that messed up several constraints. I fixed all the constraints using the red cross button but the local update button is still lit up and won't do anything when I click it.
View 2 Replies View RelatedSo 2011 had some issue and I though 2012 would get those fixed. I was wrong. More problems occur. With 2011 I was able to open assemblies directly through vault. Now with 2012, since the vault issue updates as it opens, I crash on any sizeable model or assembly. So now just to open a file, I must get it, then go to inventor and open it, and hit no when the refresh window come up. If I hit yes, it crashes. If I hit no it open, then if i hit local/global update it crashes. So technically I cant do any new work with any of my larger assemblies (2000+ parts) I have sent out numerous error reposrt, only for autodesk to say that they can replicate the problem. I have SP1 installed, and this is happening with other users at my company as well.
System:
Windows 7
64 Bit
Solid State HD
24GB RAM
Xenon Processor
Nvidia Quadro FX 580
downloaded upgrade versions CS3 on septate computers. She is taking a class in Photoshop using the Adobe Classroom in a Book as a text. About a month ago she started to have problems getting selection tools and brushes etc. to work. None of those types of tools work at all now.
She has downloaded the latest upgrades. We have completely removed Photoshop from the computer, and reinstalled it twice. The computer is scanned for viruses and bots. All other applications work fine. She is now having to use my computer to complete her class work.
ilogic function to update local styles to match Style Library?
I have a snippet of code that, on a drawings, deletes the current parts list (if one exists), then inserts a new parts list which I want to be up to date with the Style Library.
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
I was editing a photo using a hue saturation adjustment layer in CS6 and wanted to paint on the mask to hide some small areas. However, the brushes palette is greyed out. what's causing this?
View 7 Replies View RelatedThe latest Photoshop CC update failed, and Photoshop no longer worked.I uninstalled Photoshop (couldn't deactivate), but now I can't reinstall.
View 1 Replies View RelatedI am running Imac 2.7 GHz 16 gb ram 600 gb hard drive available
adjustment brushes not showing size, adjustments when done blind are slow to react.
I just updated to 13.0.4 at the end of last week. Today I went to use the Color Range command and it will not select any colors. The Eyedropper tool works fine. Adjusting the fuzziness and other options doesn't make a difference. Nor does selecting multiple instances of a color to add to the selection. Since I use this command regularly, I feel confident that it is a bug with the update and I would love to hear of any possible fixes. Or, is it possible to downgrade back to 13.0.3? I didn't realize how much I used this and it's a major inconvenience.
View 2 Replies View RelatedI did the update photoshop '14 .1.1 'and I found a bug I had not avant.quand I press F5 to display the Brushes panel, it does not open but fusione the calques.j 'but I looked in the keyboard shortcuts, but I found nothing.
View 5 Replies View Related