Win 7 CS4..I was working on a Nikon raw .nef image in Smart Image mode when the following error message appeared out of the blue. "Unable to create local adjustment. All the local adjustment controls are set to have no effect on the image." Should I uninstall & reinstall CS4?
View 2 RepliesI was editing my images on RAW when all of a sudden I guess I pressed an incorrect key (yeah you know those split seconds where something happened and you dont know what you did) and now everytime I want to use the Graduated Filter tool or the Adjustment Brush tool and I press on top of the image it gives me the following message: ERROR:Unable to Create Local Adjustment. All the local adjustment controls are set to haveno effect on this image It doesnt work on ANY raw images now, I tried pressing "Reset Camera Raw Defaults" and it still doesnt work. Is there a setting that I moved without noticing? At the time this happened I had 6 pictures on camera Raw I had synchronized them and I was doing small adjustments to one of the images, I had finished using the Graduated Filter tool on an image when then all of a sudden it stopped working.
View 5 Replies View RelatedMy (previously wonderful) local adjustment brush has apparently quit working. Whenever I attempt to make local adjustments - using either the standard presets or custom settings - all the adjustments made are applied to the entire image, not just locally. Density and flow are set to my typical values and Show Selected Mask Overlay shows the extent of the applied effect, but whatever adjustment I make is applied generally, over the entire photo, rather than to the selected adjustment area.Â
View 8 Replies View RelatedI'm trying to create a new local file but the option is greyed out (not available). We're using Revit Server 2013 and we have one Central Server and two Accelerators in different locations. This issue is affecting only one of the two locations.
View 1 Replies View RelatedWhen working on an image in ACR, if you select one of the local adjustment tabs, such as Graduated Filter, and move any of the sliders on the right-hand side, any values you change will be retained if pressing 'Cancel', then opening the image again in ACR and selecting the same tab. I find this surprising, as I would have thought that by pressing 'Cancel', any adjusted settings, since opening the image on this occasion in ACR, would not be retained.
Â
Furthermore, if you open another image in ACR and select the same local adjustment tab, the same settings that you adjusted in the other image have identical slider settings in that image as well.
Â
I can see that this behaviour could be viewed as useful, i.e. when wanting to use the same local adjustment on multiple images, as any adjustment of the local adjustment's slider settings, on their own, will have no effect unless you actually perform the selected local adjustment to the image. But, as I say, I would have expected Photoshop to simply not retain any settings you have adjusted, since opening the image on this occasion in ACR, if you don't press 'Open Image' or 'Done', and simply press 'Cancel'.
I recently got LR4. I tried to put some brushes in the local adjustment folder and there is none! SO what do I do now. I've got pictures to edit and correct and I need these brushes...now.
Â
Here is a screen shot of what is in my LR4 folder.
Instructions say that to delete an edit pin, click on it then press the Delete key. This removes the adjustment. I'm fininshed with my adjustments and just want to remove the pin. How do I do this and keep the adjustment?
View 2 Replies View RelatedI just downloaded the 5.2 beta and when trying to locate presets and use brushes, there Local Adjustment Folder did not download the with package. So I uninstalled and re-downloaded and it happened again.Â
View 1 Replies View RelatedIn the local adjustment brush, the noise slider default position is 0.Does it reduce more noise if the slider is in positive position or negative position .
View 4 Replies View RelatedUsing the local adjustment brush i can change the size of the brush using the [ and ] brackets However.. when i make a small error and want to erase brushed-area by using the ALT key then the brush size seems to be fixed to one size ?
View 1 Replies View RelatedI just downloaded a trial version of Lightroom 5. I want to change the white balance (temp and tint) using local adjustment brush but when I take a new brush, all I can change is
Â
1. Exposure
2. Brightness
3. Contrast
4. Saturation
5. Clarity
6. Sharpness
7. Color
Â
The Temp and Tint buttons that should appear on the top of this tool are not present. As shown below....
Â
Similarly, as per some youtube videos, in the Basic tools, I should get
Â
1. Highlights
2. Shadows
3. Whites
4. Blacks
Â
Instead I get
Â
1. Recovery
2. Fill light
3. Blacks
Â
As shown below.
Why is there such differences in the option? Is this because it is a trial version?
After running 4.3 update, my local adjsutment brushes are no longer recognized and appearing in the Lightroom GUI. They are all still located under 'Lightroom' folder --> 'Local Adjustment Brushes' folder (nothing has changed and I see all files are still there in Finder), but no matter how many times I've restarted LR, they are not showing up in the GUI.
View 5 Replies View RelatedAfter installing LR 3.2, the first thing I noticed is that it is much slower than the previous version (using XP Pro + 3GB memory and a speedy processor).
Â
But the most terrible novelty of this version is that the Adjustment Brush is going berserk after a while:
Â
It first slows down to a crawl, so slow that it's almost impossible to work with.While working with it after a while, it starts to show random rectangular areas that are copies of other areas of the image that have nothing to do with the area I'm working on. This happens after a brush stroke. The Undo command makes these rectangular "patches" disappear.From time to time, the whole image is flipped upside down (You can't believe it? Neither could I) eventually, after a brush stroke, the sandclock mouse cursor is displayed and the program freezes (at this time it can be using over 1 GB of memory although I'm working on a single, standard EOS 5D image). The only way to stop this madness is to kill the process. The Heal/Clone tool also shows a similar misbehavior. I didn't have these problems with the previous version.
1) Take a color image and apply a color-shift local adjustment to a portion of the image.
2) Convert the image to B&W.
Â
Result -- The main image is converted to B&W, but the local adjustment doesn't change, i.e. it's still colored. Here's a trivial (and not-realistic) example of what happens:
My goal is to adjust the colors and the apply the B&W conversion to the entire processed image, not just the original piece. Is there a way to do this? I feel like I'm missing something small and easy.
I've a few local adjustment brush presets i tend to use a lot.Now i was wondering if it is possible to assign keyboard shortcuts to them for a faster workflow?
View 1 Replies View RelatedFrom X3 to X4, Corel added a "Block Size" control to the Local Tone Mapping adjustment. Is it the number of pixels over which the contrast adjustment is being applied? It seems that the smaller block sizes reduce the effect's harshness (when it could be harsh, e.g., with faces).
Checked the manual and they forgot to mention it.
Create photo calendars for local printing.
View 2 Replies View RelatedOn start-up of Designer7 I now get the error message "Unable to store information on your local hard disk. The disk may be full, or read-only. Ok" as pretty well the last thing in the start-up process. On pressing Ok, the dialog clears and the program will run normally. Opening and saving files works just fine.
My discs (where the program is stored, where my user profile is stored, where the drawings are saved and when the temp files and Windows swap file arel orated ) have ample space and are not RO. I also ran a disc check and they're not corrupted or damaged.
No malware seems to be present (checked with a couple of different programs) but the only thing that's different is that we had a power cut while Xara was running. Since then, it keeps giving me this message.
I've just updated to the latest version and accepted the default settings and it still gives me the message.
Windows Vista 32 with Admin privileges.
Odd behavior in released x64 version of CS6 for Windows: on my laptop (ASUS G73S with 1.5 gb nVidia GeForce video), when I crop an image, the drop-down menus in a curves adjustment layer become unclickable.
But I can still access the RGB channels using the Alt + 3, 4 and 5 shortcuts. This behavior doesn't occur on my workstation, and if I don't crop the image, the drop-down menus work fine. I have the crop tool set to delete pixels. Also, if I apply curves directly (not with an adjustment layer), the dialog box works OK. And the other adjustment layers seem to be working, too. It's only the curves layer that's doing this.
I am a nube at website creator and know only a little about html. I have been fumbling around for a long time now trying to create a simple search box for my website, but I can only seem to create a free google site search which won't even work as google thinks its a robotic search.
Is there a way to create a local site search engine?
We have just installed a new server at work. We have transfered all of our Revit files to the server and resaved them as central files. We cannot seem to create more than one local file per Revit file even though we have already set up the file as a worksharing file. The one that sets up the Revit file is the only one that can create the local file. For the other user the create local file tab is grayed out.
View 4 Replies View RelatedJust a few months ago I changed from a PC to an iMac, and am running Photoshop CC for photographers including Lightroom.I am still able to use the Command/Z (formally Alt/Z on the PC if memory serves) shortcut to un-do the most recent adjustment, even though that shortcut is not listed among the shortcuts in the Help page. However, I am unable to use the corresponding Command/Y to re-do the adjustment.Is it a secret or just not available in CC and/or a Mac? I used to use these often to check out recent adjustments and I'd like to have it back.
View 1 Replies View RelatedWhen trying to use the eyedropper or targeted adjustment tools (in the HSL menu), I will grab the tool and hover over my photo and my cursor changes to the magnifying glass. When using the eyedropper the preview will reflect the white balance but when I click my photo is enlarged instead of using the tool. I know there must be a simple answer, I am just a first time user of Lightroom (previously used Bridge/Camera RAW) and am getting very frustrated.
View 5 Replies View RelatedAfter doing everything i can find to optimize my hardware/software for doing 3D animation in Ps Ext CS6. I still cannot render an animation to video using the Ray Traced Final setting. (Ray Traced Draft, no problem.) The last time I tried (after repairing disk permissions), at least Ps did not crash and give me the same old crash report (Exception Type:Â EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000007a0020000). This time I just got an error msg that my request could not be completed. (Progress?) Checking Activity Monitor, I could see that my available RAM, which was 13 GB when I started the render was now less than 1 GB (761 MB).
Â
So, I have come to the conclusion that my 16 GB of RAM and 300 GB available for virtual memory on my HD is not enough for rendering the type of 3D animation I am trying to do. Would you agree? Also, I have read it is not good to use the same HD your program is installed on for a scratch disk, so I am considering getting an external solid state drive to use as a scratch disk.
I just installed Lr4 with update 4.3. . First when i click a photo in develop mode it shows up very small. If I adjust the zoom the photo does erratic things. It gets big but with massive distortion then it will clear up but will have an effect like looking into a bunch of mirrers. Also i can not get the adjustment tools to work at all.
View 5 Replies View RelatedI often work on drawings which have multiple xrefs, each having up to 100 Layers or more, so the layer manager can be a bit difficult to trawl through to find a local layer to select.
I know how to create a local layer filter using the code ~*|* from the new filter area in layer manager.
Ideally all I want to have to type in is: LOCAL and then the local layer filter would be created, with the filter name being Local-Layers (or similar).
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
Â
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Â
Images shows my layout and what i've done this far
When I try to save an image file as a pdf, Photoshop CS6 adds .jps instead of .pdf. I cannot open the .jps file, the message says it is damaged. I have used various versions of Photoshop for years and never had any problem making images into pdf.
Â
Using the same Mac Pro, OS 10.8.2, 64-bit 16 GB RAM.
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies View RelatedMy Photoshop suddenly is not responding to any actions, such as opening ,creating or saving documents. Program is not freezed or anything, it just doesn't respond to actions. I worked with Photoshop last night, everything worked fine, set'd PC to sleep mode instead of shut down. Now when I woke up the PC, and tried to continue working, Photoshop just doesn't respond at all.
I had very little hard drive space available, but I cleaned it up to like 20Gb (I have worked with Photoshop, when there's only like 2Gb free space on scratch disk tho), closed other programs but still the same.
Restarting computer doesn't work anything, program opens, but it won't open or create anything. This is frustrating,
Suddenly my Photoshop CS4 has stopped working. I can open the program, but are not able to either open files (jpg, psd, tif ++) or create new files. No error message, it just doesn't happen anything. The program doesn't stop working either, I can still browse all menus or try to open the file again, but nothing happens, it's just like the functions doesn't work. Sometimes I''m able to open a file, by browsing my computer and choose "open in photoshop cs4". Then the file opens in Photoshop, but I'm not able to do anything. No menus or actions are working. I'm running 64bit Windows 7 on a Lenovo T420s laptop.
Â
I'm running photoshop version 11.0.2
Â
I have tried to reset the preferences, tried to reinstall Photoshop, tried other versions (CS5) and even tried to reinstall my computer. The program is still not working.
Â
System info:
Adobe Photoshop Version: 11.0.2 (11.0.2x20100514 [20100514.r.591 2010/05/14:02:00:00 cutoff; r branch]) X64
[Code]....