I am trying to record a video of a driven constraint. It seems to work fine until I go to view the video file. When I open the file the windows media player opens but no video plays. It acts as if the video is a ~ milli second long.
I have tried to save the file in both formats: .wmv and .avi. Both do the same thing.
I have 4 different sub assemblies , each with a common part , I need to line up all these common parts in my main assembly.
View 5 Replies View RelatedI am designing a vertical axis wind turbine just for some practice (just started using Inventor) and everything was going smoothly until I tried to "animate" it spinning. First, I set up a work plane that goes through the center of the structure, and then I clicked angle constraint "explicit reference vector." After watching several youtube videos, I figured that I should click on the work plane, click on another reference point, and then click another point that would be orthogonal to those two (right?). Well after I choose the first point, Inventor will only allow me to choose the center axis as the second option (which I think should be the third option).
View 6 Replies View RelatedI just downloaded the trial version CS6. I imported into Photoshop, Pro Res 422 HQ clips and it plays back very choppy. When exported it remains choppy.
View 4 Replies View RelatedI have a new camera which records in AVCHD format. I have transferred the video files from my camera to the computer. I have compiled a project on Video Studio ProX2. When I playback each clip they play at normal speed. When I playback the project before copying onto a disc the playback is very fast. I have also got as far as sharing the project onto a disc but when I click on preview the playback is again very fast. I see that I can slow down the playback but this also slows down any speech on the video.
I have used Video studio PRox for a couple of years now with great success with an old Sony Handycam but I must need to do something to the new format to play it back at normal speed.
After rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies View RelatedI was watching through footage and choose a handful of clips ... my video worked fine. Then Friday I came back to start putting everything together and the clips "went blank," The audio could be heard and played back in real time, but the video displays as a black screen or a green screen. I tried rendering, but it said it would take 2+ hours to render the 1 minute of clips I had in my timeline. Even the sections that did end up rendering just showed a blank red screen. Clips are .MTS (which I've used in every project previously with no problem) shot with a Panaconic HMC-150.
I'm using Adobe Premiere Pro CS6 on Windows 8, 64-bit operating system
Processor: Intel Core i7 CPU - 920 @ 2.67 GHz
12.0 GB of RAM
The thing that gets me is that this has worked for months, even worked with these clips a few days ago, and now it seems like everything just vanished.
In CS6, When editing Pro Res 422, Video with single layer plays back fine but with 3 layers playback and export are very choppy. I tried merging layers but the video doesn't playback at all. Is there any other settings I could try?
CS6 memory usage is 100%, sound is turned of in TL. System MacPro -Quad Core Intel Xeon-Processor Speed 3 GHz, Memory 8GB.
All the videos I've produced with VS Pro X5 have a tendency to "loop" back to the beginning and replay...
how to prevent that?
I just finished editing MP4 videos with Corel VideoStudio x3. I exported the videos in the same format. The problem i am having with all of the videos is that when I try to view them with Adobe Flash Player All I get is the audio portion of the video and the Adobe controller is visible. I have tried to exporting the videos in a few different MP4 formats but none seem to work?
View 5 Replies View RelatedI have the error, that the animation preview can't start my media player...
I allways get two errors: One from windows (the german one) and one from max...
My default media player is "media player classic home cinema". If i click on a AVI file in explorer, mpchc will launch and play it. So the file associate are ok. But max can't start it.
This is not related to max 2012... I have this error since many versions of max...
[URL]
And so does the export. I'm on a Mac.
Premiere is fine, but not Lightroom.
LR5.0/5.2 64-bit Win 7--
I am occasionally getting an error message when trying to view .MOV files from a Nikon D600: Video System Error: unknown Message: BindSuccess. Once that error pops up, I cannpt view any movies until I restart Lightroom. However, I do not have any problems viewing any of the files with Windows Media Player. What is causing this? I have an AMD Radeon 6700 HD series video card and a lot of RAM.
When capturing HDV clip with Premier Pro CC and playing it in the timeline, the video stutters. I play the same captured clip in Windows Media Player, and it look great. I am using Adobe Premiere Pro CC.-Version 7.2.1(4)
I have the following equipment:
Camera
Canon XH-A1S (set to HDV 60i)
Processor:
Intel® Core™ i7-4930K CPU @ 3.40GHz
Memory:
32 GB
System Type:
64-bit Operating System
Rating:
7.8 Windows Experience Index
Graphics Card
GeForce GTX 760
Solid State Drive
Samsung SSD 840 EVO 750G SCSI Disk Device
Resolution
1920x1200, 59Hz
BD-RW
Pioneer BDR-208D ATA Device
Monitor
Dell U2412M
Clip properties:
Type: MPEG Movie
File Size: 1.1 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;06;04;06
Pixel Aspect Ratio: 1.3333
I've created a slide show using layers and have created a video group. This turns the layers into clips in the timeline. I've added a cross-fade transition between each clip in the timeline.
Everything plays back nicely in PS. When I export to mp4 and play it back in Quicktime, no matter what the magnification, the transitions look horrible. Even if I freeze frame on one it's horribly pixelated. I've tried different export options with the same results. Something appears to be happening during rendering the transitions, as if PS doesn't know how to create them. I export to:
Adobe Media Encoder
H.264
High Quality
1920 x 1080 (same as my file)
Frame Rate 30 fps
Field Order: Preset (Progressive)
Range = All Frames
My stats are:
PS CS6
iMac 27"
10.6.8
800 gigs free space
12 gigs ram 8 free
When I play video clips back in the playback window, they shake and stutter and give an "after-effect" look to each clip. Looks like mouse trails if you select that in your setup. I am running the program in Windows 8 64 bit, if that matters, but don 't see why it should. When I play the clips in Windows Media player, just to check to see if it is the clips, none of this behavior occurs. Never ran into this one before and I have been with VS since the good old days of version 4.
I rendered a few clips that were doing that into the final MPG format I want and the shakiness is not there once rendered. It can only mean that I have something ticked or un-ticked in my setup of VS Pro 16 Ultimate. It makes it difficult to stitch together the final clips with pinpoint accuracy.
I have used on and off MovieFactory for a number of years and have been well pleased. It's simple to use and doesn't require a degree in software use to make effective DVD's playable in all DVD players.I shoot my footage with a Panasonic NV-MX300 3 CCD camcorder, which although a few years old now, can hold it's own with lower end so called HD Camcorders
My method of creating a DVD has been to capture the footage using a third-party Video editor and then importing it's export into Movie Factory and then work from there.
I have recently upgraded my version of MovieFactory 6 Plus to VideoStudio Pro X4 as this seems to better support the creation of HD BluRay discs. No I don't have the Power Pack Plug-in with my version of MovieFactory but thought that upgrading would better suit my needs.I have created, successfully a 35Gb .AVI file using my third-party NLE and it's properties are as follows: -
Stream 0
Type: Video
Codec: DV Video (dvsd)
Resolution: 720x576
Frame rate: 25
Stream 1
Type: Audio
Codec: PCM S16 LE (araw)
Channels: Stereo
Sample rate: 48000 Hz
Bits per sample: 16
My original DV footage was roughly this too. It was shot in Widescreen although the sound was recorded in 32000 Hz stereo. When I import the video into either MF 6 or VS Pro 4 the playback is in a squashed 4:3 aspect Ratio and no matter how I alter the preferences or Project Settings, before or after importing the .AVI file, it refuses to play back in widescreen.When the exported file plays in VLC Player or Windows Media Player, it plays back correctly.
Downloaded and installed the latest VS X3 trial version 13.6.2.42. Direct X is installed on the PC.
There is a problem when I try to play in VS X3 any MPEG2 file created with the earlier version of VS 7SE. The video playback is too fast and I hear only an intermittent high pitch noise. There is no problem playing the same file with the Windows Media Player.
I can play without problem .avi file captured from a DV camcorder. The VS X3 sample files play fine as well.
I have blended still photos, imported video AVI with it's own audio and music tracks. The work area was rendered and when I play the sections the music blends out and the video plays back as it's supposed to and even with full screen. Then I use the "Share" tab and burn a DVD using either a DVD-R or DVD+R and everything is fine except the video pieces that I want to play are silent.
View 2 Replies View RelatedI'm running elements 11 (on windows 8 pro), and I noticed when I click on a video, (the thumbnail is there in organiser), and hit "play" all I get is grey screen, the timeline runs fine, theres sound, just no image.
View 4 Replies View Relatedjdi1: Why is there still no video playback in full screen mode?
jdi2: Please give us an option to start video playback automatically when browsing through files in loupe and fullscreen mode (without having to press "space" or such). Let us switch this option on or off just as needed.
Video playback is still a bit laggy. Often LR5.2 needs to load audio first while the video already starts playing. If other (even freeware) media browsers can do this without latency, why not Adobe's LR?
After I've upgraded to OSX 10.8 Mountain Lion, I begin to see the following issue while trying to import .mts files from my Panasonic GH2 SD cards:
1. LR no longer sees individual files on the SD card. I know that this is because ML has decided to treat all AVCHD-related directories as packages and LR can no longer see the indivisual .mts files from the file system. However, Premier Pro CS6 CAN.
2. Even after copying the .mts files to an unrelated directory, LR is no longer able to import the files. I get the "There is a problem with the video file"
3. The .mts files I previously imported into LR 4.1 with Lion no longer plays inside LR. I see the thumbnail but if I attempt playback I get the "there was an error working with the video" error.
There obviously major compatibility issue with LR 4 and ML in relation to video files. I relies on LR for all my video file cataloging needs - now I am unable to do so. All of this was working just fine with Lion.
I rendered the video previews on the timeline (5 video timelines) The length of the timeline is 1 hr 20 min. The first 37 minutes playsback fine but from that point on, the edited video flickers showings video from the footage on each stacked timeline. I restarted computer hoping that would take care of the problem but did not.
View 2 Replies View RelatedIs there an automatic way to force a mesurement, to become Referenced? (driven)?
Even if sketch is not yet totally constrained?
If I have a parameter in a sketch were I want to change side of the reference line in a other word I want to put in a negative value in the parameter to change side. I want to do this because I have used this parameter in other equations and want not delete it and replace again.
View 5 Replies View RelatedI want to creat a driven dimension that I can use as a reference dimension in another part. Is there an easy way to do this without creating a new sketch, going into a previous sketch, making a long function based on other dimensions, etc.? For instance, just like the measure tool, but it stores the measurement.
View 4 Replies View RelatedIf my memory serves correctly CATIA used to have a feature pattern type that allowed for the selection of two sketches (or something along these lines, my memory is fuzzy). One sketch contained the feature profile, and the other contained points where you wanted the patterned features to plop out at. Is there any similar function in IV?
In case there's another way to accomplish what I'm trying to do, I'm drawing a piece of roll formed sheetmetal with a crap load of slots with non-uniform spacing. I would really prefer to not have to create a sketch and draw all these slots. Especially when there's not even a legitimate slot command. I could probably draw one and then copy it around a bunch of times,
I would like a part, that if i place it into an assembly, that it asks for a parameter (for example the length).Parts in the content center have this featere (for example tubes). I think this has to do with the driven length in the content center.
How do i create a driven length?
How to create Script Rules that make the Title or Part Number in iProperties Value always same with Doc.Filename...?
View 3 Replies View RelatedI have an assembly I've put together in Inventor 2011. I tried to make an adaptive spring to use with a shock that goes in a car. I'd like the spring to change size as the shock extends and contracts.
I went through the process of creating an adaptive spring, and it worked, but I could only change the length of the spring by using the "Drive Constraint" feature, which only allows me to adjust the spring when I'm using the "Drive Constraint" menu. It plays like a movie. What I want is a part that just moves like you would expect when you push/pull the ends of the shock. I don't want to have to drive it like a movie.
So then I thought that I could just simulate a spring by making a series of rings (toroids). I could constrain the bottom ring and top ring to the shock geometry and then have the other rings position themselves according to the distance between the top and bottom rings.
SO, I have 5 rings. The bottom ring is grounded the top ring has a Limit Constraint that sets the top ring anywhere between 3 and 7 inches above the bottom ring.
How do I create a driven dimension on an assembly that will automatically update the distance between the top and bottom ring?
I would like to call that dimension "HEIGHT", and then I could use parameters to set the middle ring a distance (HEIGHT/2) above the bottom ring, I could set the ring below the middle to (HEIGHT/4), and I could set the ring above the middle to (HEIGHT*3/4).
I should then be able to move the upper ring up and down and the other rings reposition themselves automatically to keep even spacing between the rings on either side.
I tried making a sketch in the assembly and using the "Project Geometry" function to add the location of the upper and lower rings to the sketch. I then used the "Dimension" function to create a driven dimension between the upper and lower rings. When I finished the sketch the other rings all updated exactly as anticipated, but when I moved the top ring the projected outline did NOT move, so the other rings did not continue to update.
lease do NOT link me to adaptive coil video tutorials or explain how driven dimensions work when making parts. I am not looking for that, I am looking for how to create driven dimensions between two placed components in an ASSEMBLY.
I have a parent assembly that contains multiple sub assemblies, two of which need to synchronize with each other.In the parent assembly, I have created a user form that controls the sizes and quantities of all the different sub assemblies.
Sub assembly 1 contains a bracket for supporting 4 rows of pipes.Based on the width selected from the main parent assembly, the length of this bracket can vary.
The spacing of the 4 mounting positions is also determined from the length of the bracket.Sub assembly 2 is an assembly containing all the pipes.The pipes are spaced apart to suit the bracket using a component pattern, and it is this distance that I want to control from the parent assembly.This is just one of the basic scripts I've tried.
Pipe_Spacing=Parameter("SubAssembly1:1", "Pipe_Spacing_A")
Parameter("Piping assembly:1", "Pipe_Spacing_B")=Pipe_Spacing
Pipe_Spacing_A is the spacing of the bracket
Pipe_Spacing_B is the component pattern in the piping assembly
Pipe_Spacing is the parameter in the parent assembly to be driven by the bracket parameters.
I have very little iLogic experience & have being learning as I go along with this project.My best guess is that the code can't loop back on itself. On a slightly different note, I have also noticed that the sub assemblies don't update properly.
If I adjust the width to X and regenerate the model, some of the sub assembly updates. To fully update, I have to go back into the user form, change the size to Y & then change it back again to X and then regenerate.