When working in channels and need to change a 90% black to 100% black, my entire file, other channels as well, gets corrupted with ranbom blocks of black. These blocks of black can not be changed or selected.
View 1 RepliesA while back I saw a video about using the video editing capabilities. In particular the video showed a car with a colored sheet over it and the in the video the sheet was either pulled off the car or the car moved out from under the sheet (I cant remember which). Then the video showed how to use the color replace tool to change the color of the sheet throughout the entire video.
View 2 Replies View Relatedtrying to replace the color of my deck with paint samples i got for my company.. im trying to match it, but if u look in the forground color selector its the one i want but when i pain it on it comes out different...
View 1 Replies View RelatedI've seen plenty of tutorials on the use of the Image > Adjustments > Replace Color... tool and in all of these tutorials, they will simply slide the hue slider to a color they wish to change to. I know that in the replacement section, a user can click the color box and choose a color from the swatches, even copy and pasting a specific hex code value.
This is great for web dev work where I need a precise hex color for an image. Problem is, this doesn't work. It seems to blend the new color with the existing one. What I find myself doing is more of an iterative process then: I'll use the eye-dropper tool on this blended color, then repeat the Replace Color steps again and again until I get something close to my intended new color.
I have recently purchased LG IPS225V Flat Screen monitor and installed CS5 trial version. But as I try to run it I get an error message that the "LG IPS225V monitor color profile is corrupted, run the calibration wizard" and then there are two buttons labelled: "Ignore Profile" or "Use Anyway". This is a new monitor and it is considered to be providing the best factory calibrated color.
I have other free editing programs like Picasa 3, Pain.net etc.
I have a star that I would like in a specific color, but am having issues changing it with the replace color and/or color replacement tool. The image is small, but I am trying to have all the pixels. The color I want to use is Pantone solid uncoated 655 U. This is the image I am trying to change.
View 4 Replies View Relatedworking on a file, a sketch saved it and opened it many many times with no problems 3 days ago i looked for it but i cant seem to find it on my computer at all.i used a file recovery program just to get it back on my computer.but its now corrupted (could not complete request beacues its not a valid photoshop dcoument) .
tryed many ways to fix it its not working. im ready to try anything just tell me !i don't care if i cant edit or open the file on photoshop all i want is to be able to view it i just want to see it again! thats it.
While working on my Mac on a PBS file (just over 3GBs) it crashed while saving. Now when I open the file, it's a mesh of colors on the screen and only 1 layer and is now only 1.5GB. The file is stored on a WD Myworldbook and I have looked for a way to restore previous files but doesn't seem to be an option. There was no backup file made.
View 6 Replies View RelatedI had spent my artwork for many days with so many effort and time, and it has been corrupted after a computer crash (not PSD crash). I am using Windows 7.
-What happened after: 1 black layer (around 59 MB)
-What happened before: Had multiple saves, 15+ layers (so why it is not back to the latest save?)
I tried: Previews in PSD, Bridge, using recovery programs (none worked), hex editor, searched for temp./restore previous version files (none) how to recover this file.
My computer crashed today while photoshop CS5.1 was saving/writing to a psd file. When I started my computer back up, and tried to open the file again, It only displayed 1 layer shown as a corrupted image (As Shown Below - the Red Image). When I click on the file in the "Open" window (The Gray Image Below), the psd shows up correctly in the Preview window but doesnt show correctly when opened.
I have lost all of my layers, by the way I have worked on this psd for weeks and I need some way to recover it. I have tried "corrupted psd recovery programs", they did not work. I have tried forums - I found no answer. I have tried locating the .tmp file but it is no where to be found.
Does photoshop have a cache or a history? maybe for previously saved versions of psd files? Or does Windows 7, 32 Bit have a file recovery method? I have tried a windows 7 recovery method but it only recovers files from previous restore points that may be weeks old. This is very important that I do my best to fix this psd file or at least recover some layers, I have put in too much time and effort.
It happened already twice. I am working in one of my layers, I am changing the levels , the image in that layer gets black. I cant undo or go back in history. In the history pallette the original picture at the top goes black. If I try to save, all the layers get corrupted, with missing arbitrary squares in all of them. The first time it happens the missing areas where white, the second time they change to black. The top picture in the history pallette maches the black or white color.
The small picture in the icon in my desktop looks normal , but when open is tottally corrupted. If I have other files open, all of them get corrupted also if I tried to save.
today i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
Update has failed several times. The update log states a file is corrupt and the program needs to be re-installed. How do I do this?
View 3 Replies View Relatedafter working with a lot of layers, masks and clipping layers my file got corrupted. That happened in the past but I always found a way to fix it buy copying uncorrupted layers to a new file. Most of the time it was just one layer corrupted. But this time is big, it looks like the whole file is corrupted.
View 2 Replies View RelatedI am getting the above error message when trying to open a grd file in Photoshop CS6. I don't beleive the file is bad or corrupted. How to get the file to open?
View 1 Replies View RelatedI was working on a Photoshop CS4 file last night that was created in CS4 and has only been opened on this machine in CS4. I saved the file and closed Photoshop. When I open the file today, all my layers are gone, flattened into one Background layer, and the image looks like colored TV static. On top of that, the separate, older version of this file with a different name (created earlier in the week on the same machine in the same CS4) will not open at all - I get the error message, "Could not complete your request because the file is empty" and the file size has mysteriously shrunk to 76 KB from 20+ MB. What happened?! I'm guessing these files are corrupted beyond recovery, but why and how did this happen?
View 5 Replies View RelatedI have a PSD file that became corrupted when the power went out in the house while in the middle of saving the the file.The PSD file itself is corrupted.
When I load it it says "Could not complete your request because an unexpected end-of-file was encountered." I have tried all sorts of PDS recovering programs and none could get the file recovered except for a BRIGHT BLUE/GREEN BACKGROUND.
When I load up photoshop 5.0 and go to select the corrupted psd file, there thumbnail DOES show up perfectly fine. However I cannot remotely see it in details because it's TINY.. Like 1/16" x 3" high.
Is there ANYWAY.. with ANY PROGRAM that will actually extract that thumbnail? All the ones I've tried online or downloaded extracts the thumbnail as just one BRIGHT BLUE/GREEN BACKGROUND.
I'd like to extract the thumbnail and have it LARGER so I can actually VIEW the contents.
I just tried to restore V10 defaults using F8 but the problem persists:Ventura 10 interface is corrupt and icons in the toolbar are hidden; I can see the desktop through the V10 toolbars. Only when I mouse over them they appear. But not all icons will appear.
If I try to run the color management dialog box I get printer driver errors.Is there a way to restore V10?
In the meantime I'll try to remove/reinstall V10.
The preview of the picture still appears when I select it in Photoshop, and even appears for a few seconds in Adobe Bridge before going back to black. But nothing I tried, from restore plug ins to online retrieve systems (that tried to bring back individual layers, only accounting to a single black layer and a bunch of blank ones) worked. I'd really like to get the picture back, or at least a png of it, but I'm at loss for what to try next. I use Cs5.1 64 bits.
View 3 Replies View Related"extrusion file is bad or corrupted" error when a file is chosen, photoshop then "stops working" and windows shuts it down. I then have to restart to make another attempt.
View 3 Replies View RelatedI was working on a TIFF document,suddenly windows crashed.Then,when i tried to open again the file with ps,it says: " the document isn t compatible with this PS'version"..It seems to be corrupted,or damaged.How could I recover this file?
View 2 Replies View Relatedtoday I had opened my photoshop file which I was coloring ( a comic page) I allready spend 3days on this comic and I just don't wanne start over .I was working on it in CS6, As friends suggested I had opened it aswell in CS5 to try if it works there but no it didn't. I also placed it in AI, but sadly again the ugly line picture shows up .
View 1 Replies View RelatedJust upgraded from Civil 3D 2010 32-bit to Civil 3D 2011 64-bit. Over the years several user-defined color books were constructed using the Autocad Color Book Editor. With previous upgrades, these ACB files were simply transferred to the new version and worked OK. However, having upgraded to 2011, when the color books are opened, instead of the original colors, the color pages are corrupted, showing what look like Pantone red, green, and blue colors.
View 6 Replies View RelatedI have an image taken from off the Net that I need to edit and change some colors.
In the Replace Color dialog I can select the "source color" but I can't specify the "destination color" except by dragging the Hue slider.
I'd like to be able to specify the "destination color" I want in more detail, like selecting it from a pallette, inputting RGB/HSB values etc.
How could I do that?
I'm trying to use the Image -> Replace Color tool in photoshop cs5 to replace one color in a jpg with another from the same image.It wont let me. The new color has to be from the palate apparently??
View 9 Replies View RelatedA basic question for a basic user. I have a layer in an image which I created by using a paintbrush to create a shape using the colour black on a transparent background. I want to change this outline shape to a certain green. I go to Image/Adjustments/Replace Color. I click the radio button called Image and I see my black outline on a white background. The colour in the little boxes is black, same as outline.
I change the foreground colour to the green I wish to use and this changes the colour in the little boxes in the Replace Color window to that green. However, whichever eyedropper I choose to click on the black outline in the image just changes the colour in the little boxes back to black. So it is working in reverse to what I want to happen. How can I get the outline to turn from black to green?
I would like to know if there is a method to replace all of one color, with another. I am working with a graphic, and not a picture, so I have it easy, but I would still like to know.
I am new to photoshop, but it has served me well so far.
I have in my document a green brush-stroke, with very feathered edges (brushsize=47px, hardness=0). I want to replace all of it with red. I selected Replace Color effect, and all is fine- for the central green that is. It becomes red. But the blurry green edges remain green, even with maxed Fuzziness.
What can I do?
It's possible in photoshop cs to replace a color by an other? I have a black part in my picture (rgb = 0) and i want to replace this color by a red color (rgb = 255).
View 1 Replies View RelatedPhotoshop CS.
I have a document with a number of layers. Each layer has lines of a single pure colour.
When I try to replace a colour, Photoshop is replacing it with the wrong one!
For instance when I try to replace RGB 128,0,128 with 96,56,17, the outcome is 105,61,18. I try to replace 212,0,212 with 96,56,17, the outcome is 145,85,25.
In the colour picker dialogue, the radio button R of RGB is currently selected. Web safe is not enabled. The file is RGB, 8bits, so this seems reasonable. The eyedropper tool is set to point sample, but as I said the lines are pure colour anyway.
The layers are all at default settings for blending etc.
One thing I have noticed is that when I click on the 'result' colour panel in the replace colour dialogue, the colour is always out by 1 in the blue channel. Since I change this using the RGB numbers, this should not impact the result either.
I am replacing a color using the 'replace color' under 'Image->Adjustments' to match a certain color. Is there a way where i can replace the selected color by typing in RGB values instead of moving the Hue, saturation, and lightness sliders? The sliders doesnt provide exact color matching, instead i have been eyeballing the colors to match, which is dangerous when it comes to deatail.
View 5 Replies View Related