I was working on a TIFF document,suddenly windows crashed.Then,when i tried to open again the file with ps,it says: " the document isn t compatible with this PS'version"..It seems to be corrupted,or damaged.How could I recover this file?
View 2 RepliesI can not open a photoshop file, although it was saved with the same version. "The file is not compatible with this version"
View 7 Replies View RelatedI am trying to load an action and am getting the error Could not complete your request because the file is not compatible with this version of Photoshop. I am getting this with both my Windows 7 version as well as MAC OS 10.7.3. Both versions of Photoshop is at the latest version, 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00.
That version is from my MAC. Others that have tried this version of action is working fine. Now, I do not know what version of operating system and version of Photoshop that they are using. The action is a .atn file so that is not an issue. The creater states the action works regardless of what version of Photoshop a user is running.
Cannot open a Photoshop Elements 7.0 file that was created yesterday. It says the file is not compatible with the current version. How can I get it to open?
View 1 Replies View RelatedI've been using photoshop CS2 for a while now and have recently encountered a problem.
after, working on a .PSD file for a week, i tried to open said file and recieved the error message
"This file is not compatible with this version of photoshop."
I've looked up the causes for this and i'm not saving over a network and i don't have norton antivirus installed.
How do i stop this?
I was working on a big tif file 2g at size, I edit it with photoshop through adobe lightroom. Due to unknown reason, when i tried to save the file in photoshop, and I was informed the file is non-accessible. It ends up the file is disappeared from hardisk and I used some recovery software to retrieve the tif files. However, it seems a corrupted tif files which can't open in Photoshop or Irfanview.
the error message I got from photoshop is 'could not complete your request, because it is not the right kind of file'.. it is a tif file with layers.
I had tried to google and search, it seems there is no way to repair a corrupted tif files.
I literally get about 2min into my design and before I can even crop the photo Microsoft's DEP (data Execution prevention) closes down Photoshop. Any DEP compatible version of photoshop?
View 6 Replies View RelatedI am working on a project and i am surprised to find a strange multiply blend mode behavior. When i open a new blank document to try again the multiply behavior, all seems to work well.
Is it possible that the document i am working on became corrupted ? I work on a 2012 Macbook Pro Retina 15", Mac OS X 10.8.5 and Photoshop CC 14.1.2.
This is what i see :
- Normal blen mode.
- Multiply blend mode.
Are any plug-ins that work on Photoshop CS5 compatible with CS6?
Also, the Deblur plug-in does not seem to be included in the trial version. Will it be included in the final release?
I have an older version of Adobe Photoshop (3.0, 1996) that I have tried to load under Windows 7 and under a "Parallells" WIndows 7 on a MAC OSX 10. Both give me an incompatibility message regarding a 32 bit application and a 64 bit application.
how I can use the older Photoshop under Windows 7.
I just bought a new laptop with Windows 8..I need a cheaper older version of Photoshop Elements compatible with this....I have been using Elements 7, but no longer have this.Also what version of Lightroom is compatible with windows 8?
View 1 Replies View RelatedI downloaded Pyrochilds "Smudge" plugin and the plugin error says that it's not compatible with this version of Paint.Net. I have the latest I believe v3.5.8 I also unblocked it and still nothing.
View 1 Replies View RelatedI am using PSE 12 as an external editor for Aperture. When I ask to use an external photo editor, Aperture creates a .tiff file in my Aperture folder, launches PSE 12 and tells it to edit that .tiff file. This all works great. When I am done editing in PSE 12, I ask it to save the file and it saves it back to the original Aperture folder with a .tif extension. I can instead say "save as" and then it suggests the file name with a .tif extension. When I correct the extension to .tiff it warns me that I'm going to overwrite the file (exactly what I want!). I say yes and then I find out that PSE did not overwrite the file, but wrote it as a .tif file anyway. I have to go to the folder, delete the .tiff file and rename the .tif file to .tiff and then everything is fine - but what a hassle.
View 3 Replies View RelatedI have a tif background that shows up in my pdf plot preview, but it will not actually print. All I get is a pdf showing the linework. I've recently switched from 2008 to 2010 and am wondering if that has anything to do with it as I had no problems in the past? While the tif file is large, it always plotted in 2008.
View 7 Replies View Relatedworking on a file, a sketch saved it and opened it many many times with no problems 3 days ago i looked for it but i cant seem to find it on my computer at all.i used a file recovery program just to get it back on my computer.but its now corrupted (could not complete request beacues its not a valid photoshop dcoument) .
tryed many ways to fix it its not working. im ready to try anything just tell me !i don't care if i cant edit or open the file on photoshop all i want is to be able to view it i just want to see it again! thats it.
While working on my Mac on a PBS file (just over 3GBs) it crashed while saving. Now when I open the file, it's a mesh of colors on the screen and only 1 layer and is now only 1.5GB. The file is stored on a WD Myworldbook and I have looked for a way to restore previous files but doesn't seem to be an option. There was no backup file made.
View 6 Replies View RelatedI had spent my artwork for many days with so many effort and time, and it has been corrupted after a computer crash (not PSD crash). I am using Windows 7.
-What happened after: 1 black layer (around 59 MB)
-What happened before: Had multiple saves, 15+ layers (so why it is not back to the latest save?)
I tried: Previews in PSD, Bridge, using recovery programs (none worked), hex editor, searched for temp./restore previous version files (none) how to recover this file.
My computer crashed today while photoshop CS5.1 was saving/writing to a psd file. When I started my computer back up, and tried to open the file again, It only displayed 1 layer shown as a corrupted image (As Shown Below - the Red Image). When I click on the file in the "Open" window (The Gray Image Below), the psd shows up correctly in the Preview window but doesnt show correctly when opened.
I have lost all of my layers, by the way I have worked on this psd for weeks and I need some way to recover it. I have tried "corrupted psd recovery programs", they did not work. I have tried forums - I found no answer. I have tried locating the .tmp file but it is no where to be found.
Does photoshop have a cache or a history? maybe for previously saved versions of psd files? Or does Windows 7, 32 Bit have a file recovery method? I have tried a windows 7 recovery method but it only recovers files from previous restore points that may be weeks old. This is very important that I do my best to fix this psd file or at least recover some layers, I have put in too much time and effort.
It happened already twice. I am working in one of my layers, I am changing the levels , the image in that layer gets black. I cant undo or go back in history. In the history pallette the original picture at the top goes black. If I try to save, all the layers get corrupted, with missing arbitrary squares in all of them. The first time it happens the missing areas where white, the second time they change to black. The top picture in the history pallette maches the black or white color.
The small picture in the icon in my desktop looks normal , but when open is tottally corrupted. If I have other files open, all of them get corrupted also if I tried to save.
I've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View Relatedtoday i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
I am running cs6 on both PC and Mac. On my pc if I save a Photoshop file on it as a save as, it does not open the file immediately. I have to close the original file, find the file then open it. Very time consuming and also confusing if you are working fast. On my Mac if i save a document in Photoshop, doing a save as, it saves the doc, and opens it right there and you just continue to work.
View 7 Replies View RelatedUpdate has failed several times. The update log states a file is corrupt and the program needs to be re-installed. How do I do this?
View 3 Replies View Relatedafter working with a lot of layers, masks and clipping layers my file got corrupted. That happened in the past but I always found a way to fix it buy copying uncorrupted layers to a new file. Most of the time it was just one layer corrupted. But this time is big, it looks like the whole file is corrupted.
View 2 Replies View RelatedI am getting the above error message when trying to open a grd file in Photoshop CS6. I don't beleive the file is bad or corrupted. How to get the file to open?
View 1 Replies View Relatedif I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies View RelatedWhen working in channels and need to change a 90% black to 100% black, my entire file, other channels as well, gets corrupted with ranbom blocks of black. These blocks of black can not be changed or selected.
View 1 Replies View RelatedI was working on a Photoshop CS4 file last night that was created in CS4 and has only been opened on this machine in CS4. I saved the file and closed Photoshop. When I open the file today, all my layers are gone, flattened into one Background layer, and the image looks like colored TV static. On top of that, the separate, older version of this file with a different name (created earlier in the week on the same machine in the same CS4) will not open at all - I get the error message, "Could not complete your request because the file is empty" and the file size has mysteriously shrunk to 76 KB from 20+ MB. What happened?! I'm guessing these files are corrupted beyond recovery, but why and how did this happen?
View 5 Replies View RelatedI have a PSD file that became corrupted when the power went out in the house while in the middle of saving the the file.The PSD file itself is corrupted.
When I load it it says "Could not complete your request because an unexpected end-of-file was encountered." I have tried all sorts of PDS recovering programs and none could get the file recovered except for a BRIGHT BLUE/GREEN BACKGROUND.
When I load up photoshop 5.0 and go to select the corrupted psd file, there thumbnail DOES show up perfectly fine. However I cannot remotely see it in details because it's TINY.. Like 1/16" x 3" high.
Is there ANYWAY.. with ANY PROGRAM that will actually extract that thumbnail? All the ones I've tried online or downloaded extracts the thumbnail as just one BRIGHT BLUE/GREEN BACKGROUND.
I'd like to extract the thumbnail and have it LARGER so I can actually VIEW the contents.
I am getting the message "this file is not compatible with this version of Photoshop." Which doesn't make sense because I used this version of Photoshop to create this file.
I am on CS3
Windows XP Pro
The file is a layered Tiff and is 190.3M
AVG is my security, not Norton Anti Virus
When I look at the preferences it states that it was created in CS3. How can I open this file? and what caused this to happen?