Photoshop :: Corrupted TIFF Files
Mar 9, 2012
I was working on a big tif file 2g at size, I edit it with photoshop through adobe lightroom. Due to unknown reason, when i tried to save the file in photoshop, and I was informed the file is non-accessible. It ends up the file is disappeared from hardisk and I used some recovery software to retrieve the tif files. However, it seems a corrupted tif files which can't open in Photoshop or Irfanview.
the error message I got from photoshop is 'could not complete your request, because it is not the right kind of file'.. it is a tif file with layers.
I had tried to google and search, it seems there is no way to repair a corrupted tif files.
View 3 Replies
ADVERTISEMENT
Oct 11, 2013
I was working on a TIFF document,suddenly windows crashed.Then,when i tried to open again the file with ps,it says: " the document isn t compatible with this PS'version"..It seems to be corrupted,or damaged.How could I recover this file?
View 2 Replies
View Related
Jul 22, 2013
I recently transferred all my work from a work computer to my mac at home. i am unable to access my work computer until October as we are having a 'break'. However, I have a deadline for September 15th and I need all my files.Some older files open perfectly fine but I fear there was a problem in downloading-perhaps due to my haste to leave and enjoy the beautiful weather! I tried downloading a Remo Repair software but unfortunately this was unable to launch.
Basic notes:
Created on Windows computer cs5
Trying to open on Mac cs5
Sd card used to transfer-couldn't eject, this may be the problem
View 1 Replies
View Related
Jul 7, 2013
Lately I've been finding that I've been having lots of corrupted image files -- many of my jpgs and even my psd's have strange bands of colour/image shifts that are permanent, and many of my tif files are now 'unparseable'.
Here is an example of this kind of corruption. Notice the bands of shifted colour and even shifted pixels:
What can be causing this? I'm worried because this is destroying my library of images. I have everything backed up to DVD which is good because I just checked and those files are fine -- so it is some sort of corruption, not software-related.
View 2 Replies
View Related
Apr 21, 2012
Ok I did this graphic a few years back for a website but now my original files have been corrupted and are not able to be opened. I have lots of similar fonts like ethnocentric but it is not quite right. I have also tried uploading it to font identifier etc.
View 6 Replies
View Related
Nov 15, 2013
So my Photoshop CS6 is slowly corrupting files. I open psds to find nothing but a giant whit wall. I zoom out and the white disappears but then I can't zoom in any further than 50%. My rulers however, show that I'm zooming in. Then when I select another layer... it snaps to % I should be looking at. (Also... this particular file won't give me a preview in the icon on my desktop. Related?) This is not happening with all my files. Just the ones surrounding this particular project.
View 2 Replies
View Related
Jul 14, 2004
My Photoshop crashed in the middle of saving. There's now a tmp file in its place. I tried opening it with Photoshop but it got an error. Is there any recovery program for getting back corrupted save files?
View 5 Replies
View Related
Nov 23, 2012
"extrusion file is bad or corrupted" error when a file is chosen, photoshop then "stops working" and windows shuts it down. I then have to restart to make another attempt.
View 3 Replies
View Related
Jul 5, 2004
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
View 5 Replies
View Related
Mar 23, 2012
Odd, and infuriating, problem. PS CS 5.5, Mac OSX 7.3 'Lion'.I was working on three small, not-complex PSD files. Each had been opened, saved, closed, reopened successfully several times.
When loading some .AI artwork to rasterize, Photoshop CS 5.5 got hung up on the open-file dialog box. I got the spinning beachball. Not only did PS stop responding to any input, but the entire Finder did - and eventually even the mouse cursor wouldn't move. I had to force a shutdown and reboot of the Mac.
When I got my system back up and running, I could no longer load those three files. Every time I try to load them, I get this error:'Could not complete your request because the file is empty.'
Acorn, Pixelmator, and Preview also fail to load the files. Preview tells me they're corrupted. Acorn and Pixelmator report unknown errors.Only one of those three fiels was actually open when Photoshop froze. Yet all three files have been affected.Their filesize on disk is non-zero - 70, 105, and 70 KB (small files, I know - 300 x 250 pixels, and again, not complex).
Duplicating the files doesn't work. Copying them to another volume doesn't work. They appear to be completely, permanently destoryed. Their thumbnails render in Finder, but the files refuse to open.Again, the files arenot huge, but they represent half a day's work.
View 6 Replies
View Related
Oct 24, 2010
When I render a project selecting an “HDV” setting, the result is corrupted. Only about 40% of the image height is displayed. The bottom 10% of the image is inverted to the top, followed by the next 30%, and the balance (the top of the image) is absent. (Audio is normal.) No difference whether I play these files on the PC or on a PS3.
I am using VideoStudio Pro X2. My source files are video only. I do not use transitions or titles.
I capture the video files with a Canon Vixia HF200. They are MTS files, ranging in size from 10MB to 300MB each. I download them to a Dell Dimension 4600 using a USB 2.0 port.
I create smart proxy files and I am able to edit them normally.
Project properties:
·Duration = 5 to 10 mins
·NTSC drop frame (29.97 fps)
·MPEG files
·24 bits, 720 x 480, 29.97 fps
·Lower Field First
·(DVD-NTSC), 16:9
·Video data rate: Variable (Max. 8000 kbps)
·LPCM Audio, 48000 Hz, Stereo
I am able to burn them to a DVD normally. Until sometime in March 2010, I also was able to create HD video files normally. Those old projects had the same properties as above. Those old files still play normally. But if I create a new HD video file now, it is corrupted.
Output format = “create video file,” and “HDV 720 – 30p”
Output Properties:
·MPEG files
·24 bits, 1280 x 720, 29.97 fps
·Frame-based
·(MPEG-2) (Transport stream), 16:9
·Video data rate: 18300 kbps
·Audio data rate: 384 kbps
·MPEG audio layer 2, 48 KHz, Stereo
Error Codes = none
This problem affects all “HDV” and “Blu-ray” output formats. Other output formats are OK. The files burn to DVD OK. (I have not tried burning a AVCHD disk lately.)
I downloaded and installed the latest version of DirectX using the link in one of the “Announcements” at the top of this board. This did not solve the problem. (In fact, now if I render a file using HDV 720-30p it does not show at all, and no audio.)
I downloaded and installed the patch for VS Pro X2. This did not solve the problem.
View 3 Replies
View Related
Mar 20, 2012
Since I upgraded to Lightroom 4 last week, I've had two occasions where Windows 7 operating system at boot tells me I have corrupt files on the separate 2TB drive I use to store Lightroom catalog and photos on. One difference between my LR3 vs LR4 settings was that I turned on the option to write XMP data to files per advice from Adobe evangelist that this is a better backup strategy in case LR catalog gets corrupt. Wondering whether the LR 4 background process to write out XMP is causing the problem.
It might be a self inflicted wound, as last night, I was importing iPad screenshot PNG files into Bridge, batch renaming them and then exporting them to hard drive as JPG (when is Lightroom going to support PNG?) and synchronizing that folder in LR4 so that I can view in LR4. Maybe the fact that I have LR4 and Bridge open at the same time and doing some operations corrupted them? LR4 got stuck at 1% progress in creating previews, so left the computer on overnight and when I come back in morning, black screen of death. When reboot, says I have to check that drive and finds lots of corrupt record segments. Never had this problem with LR3 and Bridge open at same time before LR4 and turning on the option to write XMP data to files.
View 11 Replies
View Related
Feb 23, 2014
I use a fully registered Lightroom 5.3 with my Canon 5D Mark III, and I have this kind of corruption on some of my CR2 files from times to times. If i reimport the .cr2 file in another catalog or even on another the resulting file is still corrupted.
The wierdest thing is that the original import was successful and I successfully exported it several times correctly. The corruption should have happens afterward:
This is absolutely inacceptable from a professional software.
PS: I had this kind of curruption with an old version of Lightroom with my previous pentax K7d, but I though this was past
View 1 Replies
View Related
May 13, 2013
I've been getting about one or two of these per 3000 photos recently, and obviously it's not a huge deal until it's the ONE image you wanted. I've gone back to the memory card and the file is fine when opened from the memory card and fine when I re-copy the image. Sometimes it's just the preview that looks like this, but when I open it in develop mode it's fine. The file also shows up corrupted when navigate to the folder and open it in photoshop.
This is a rather new phenomenon for me, last year in 125,000 images probably 3 total, but in the last month (10,000 photos) I've had 6. Is it the new version (4.4) of lightroom? Is it my hardrive? Is it my card reader? The only thing I think I've ruled out is my memory cards and camera.
View 13 Replies
View Related
Nov 11, 2013
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
View 2 Replies
View Related
Oct 1, 2012
having major issues with sheet sets in Autocad 2013 (actually we're using Autocad MEP 2013... but haven't gotten any responses to my post over in that forum so trying it here too). We use them constantly, and up til now they've worked great. In 2013, we can't get a .dst file to stay valid for more than 2 hours. You can create them & work with them just fine, but once you close & reopen AMEP it says the .dst is invalid, and it creates a new .dst of the same name in the same directory w/ 0kb file size. After that, nothing works... view names, sheet titles, etc., everything that is driven off the sheet set. And of course every time you have to recreate a sheet set, you have to recreate every detail callout, sheet title, detail title, etc. in the set of drawings.
We've installed AMEP 2013 SP1, doesn't make a difference.
All of our machines are Win7 Pro, mixed 32- & 64-bit, with plenty of processor/memory/graphics capability. Our standardization stuff runs off of our network/NAS drive.
View 9 Replies
View Related
Dec 14, 2013
I just downloaded lightroom 5.4 the other day and today was the first time I went to download images with it.
I could review all my images before I plugged my card into the card reader and attempted to download them, when I opened the import window in lightroom the first image on the card had a preview, but it was greyed out and the rest of the images came up with the .CR2 icon and when I tried to import them I got an error message saying that the files cannot be read.
I tried ejecting the card and putting it back in my camera, but now I can't see the images on my camera either or save them manually to my hard drive.
The files are from a Canon 5D mk II and I shot all the images in RAW with no JPG's.
View 4 Replies
View Related
Oct 30, 2013
When exporting points to a .TXT using PNEZD the elevation goes haywire.
After being exported it reads roughly 69000 in an area where the elevation should be about 5400 to 5800 feet
(very roughtly a factor of 12)
Is there a variable I can change to fix this?
View 6 Replies
View Related
Apr 4, 2013
Trimble Access, Civil 3d 2012 export road problem
when I export a road file to my TS2 it becomes corrupted (file size 50% of what it should be.
4 months ago there was no problem. The weird thing a is that the other worstation in the office has this issue to.
Here's what I have done to troubleshoot: swapped out both data collectorsexported this rxl file to a virtual instrument on my desktoptalked to cansel and autodesk but the said they haven't seen this problem. I can rule out the following.
trimble/autodesk software, hardware ( to much a coincidence that both work stations have this problem)Data Collectors swapped out - file size of the corrupted rxl were the same on the virtual deskto instrumentcorrupted dwg - exported a road six months ago, now re-exported and the new file is corrupted.
Both machines are identical:
Pentium Zeon
16 gb RAM
Identical software installation
View 3 Replies
View Related
Jun 7, 2012
Tune up utilities got into my system and was finally removed by windows installer today. I tried 2 times to repair Autocad2011 civil 3d, then 3 times to reinstall it, finally removed all files I could find and tried 2 times to install. Cannot install I get eror 1402 about the key being too full or somtehing like that. It is the student version but I use it for my own use and need to access the files.
View 3 Replies
View Related
Oct 30, 2013
I am trying to attach a number of tiff files to individual dwg files. There are about 300 so I am writting a script that will open a new dwg, insert the tiff and save the dwg at a given name, so i have filedia set to 0 and everything is user input.
The problem I am having is that when I use the iinsert command and enter the path for the tiff I get this error: (filename)was not found or is not valid. This is pathed to a network drive. When I copy the same folder to my c: drive and run the command everything works as should. is there any reason for this?
When pathed to the c: drive and working correctly it looks like this:
C:UsershbrittDesktop11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
When pathed to the network it looks like this:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
I get this error:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70 was not found or is not valid.
I noticed in the error message it cuts the end of the file name off. Is there a character limit?
I have done this before with a path to the network and everything worked as should. We have recently upgrade to 2013 but i would'nt think that would be an issue.
So basically, file on local drive everything inserts fine. File on network, get error.
View 3 Replies
View Related
Aug 2, 2012
In Photoshop CS6 when I save a TIFF file it saves with the .sgi extension. When I save a png it saves it with the .raw extension. I haven't had this problem with previous versions of PS. I'm on a Mac with OSX 10.6.8. I also noticed that I have a plugin in the Plugins folder that's called SGIRGB.plugin. What's going on with saving in these file types or what this plugin is?
View 3 Replies
View Related
Oct 25, 2013
Occasionally my TIFF files open in ACR instead of opening directly into Photoshop. It doesn't happen with every file. Why would this happen? How do I prevent it?
View 1 Replies
View Related
Aug 30, 2013
i have file in tiff format on a seperate hard drive can i play them on my tv without a computer if so how ..also if i have the same type files on a memory stick can i ply these on my tv without a computre .. is there a device to play both.
View 1 Replies
View Related
Jun 24, 2008
Photoshop 7 has suddenly started saving TIFF files without a preview or thumbnail. That is, I can't see the preview or thumbnail in Windows Explorer (Windows XP) or Windows Picture & Fax Viewer--which says "no preview available."
This just happened--I've just saved dozens of pics in TIFF with previews.
I tried resetting my Photoshop preferences--no change. In the File Handling Preferences, for Image Previews, "Always Save" is selected. When I save an image, in the "Save" dialog, "Thumbnail" is checked (and grayed out).
However, if I try to open a file from within Photoshop, in the Open dialog box, when I click on the file, I do see a preview.
View 5 Replies
View Related
Oct 9, 2006
When I save my work as a .tiff, the .tiff files are always much darker than the original file. All work is being done in CMYK on Photoshop CS 8.
View 3 Replies
View Related
Apr 17, 2012
When trying to export RAW files to TIF files I get following Warning message:
Unable to Export:
An internal error has occured: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.
This happpens in LR 4 and I never had this problem in previuos version.
View 3 Replies
View Related
Aug 14, 2013
I made a picture in HRD Pro, and i want to work on it. I saved it as a .psd and also as a .tif, but I cannot open nor the .psd, nor the .tif in Camera Raw? If I save it as a .Jpg I already lose quality..?
View 15 Replies
View Related
Oct 24, 2013
I am trying to continue an assignment that I started at school today, but the Photoshop CS6 (64 bit) that I have on my laptop will not let me open any files. Not, JPEG, TIFF, PSD, PNG, nary a one of the photo types can be opened. It doesn't give me any signs of trouble or error messages. It just wont let me open a file or make a new file. I just sits there in all its power staring me down. why must Photoshop all of a sudden despise me so?
View 4 Replies
View Related
Jul 7, 2013
I use CS5.1 and just recently when I go to save my edited file as a TIFF, the file is now blurry. I even tried to save a RAW file as a TIFF (with no editing) and it is still coming up blurry
View 1 Replies
View Related
Jul 3, 2012
I have a question about the size of tiff files. I start with RAW (NEF) photos from my Nikon D800. These files generally import at around 40MB each and I am using Lightroom 4 to keep track of them.
I'll use Lightroom's "Edit in PS" functionality, make a bunch of edits to the file in CS6, flatten all the layers, and then save the file (as a tiff). The original NEF file was ~40MB but the new tiff file (in this specific example) is over 200MB!
How can I get the file back to a reasonable size for storage? I don't want to have to save it as a jpg - I want to keep as much information as I can.
View 10 Replies
View Related
